A laboratory investigation was undertaken to evaluate the effect
of lateral spacing and lateral diameter on the flow characteristics of
a three dimensional blowing manifold.
The model used in the experimental work was constructed of
clear cast acrylic pipe, five inches in diameter. Laterals of two and
four inch diameter,...
An experimental study was performed to investigate the effect of
flow channel geometry on fully developed turbulent flow in "clean" rod
bundle flow channels. This information was sought to obtain a better
understanding of crossflow mixing between rod bundle subchannels. The
experiments were performed in water with a Reynolds number...
This thesis proposes a criteria for the evaluation of those variable
parameters that influence the response of a hydroelectric generator
driven by a hydraulic turbine of the Kaplan type. It is considered
a requirement that a unit must be stable when supplying an isolated
load and it is assumed that...
A numerical technique is presented for solving the gas dynamics
of a pulsating combustor. The computer solution which is developed
follows directly from the fundamental conservation laws applied to
discrete volumes rather than attempting either to finite difference the
resulting partial differential equations, or to apply the Method of Characteristics....
Experimental measurements on the longitudinal dispersion of flowing water in coiled tubes were made using NaCi as tracer and conductivity measurement techniques. The 171 runs were made in coiled and straight 1/8", 1/4" and 1/2" I.D. polyethylene tubes from 25 to 300 ft. in length with coiling ratio, r/R[subscript c]...
