This thesis presents an automated methodology to calibrate the substrate profile for accurate prediction of substrate parasitics using Green's function based extractors. The technique requires fabrication of only a few test structures and results in an accurate three layered approximation of a heavily doped epitaxial silicon substrate. The obtained substrate...
This thesis presents the contributions to substrate noise due to supply coupling and the effect of pin parasitics on the substrate noise generated by digital circuits. Various sources of substrate noise and their effect on analog circuits sharing the same substrate are discussed. A simulation approach to isolate the various...
As the functionality of digital chips continues to increase dramatically, chip- to-chip communication bandwidths must scale accordingly to avoid constraining the overall system performance. Therefore, high speed transceiver design has be- come an important research topic. In particular, the performance of the circuits that are responsible for timing accuracy are...
The primary objective of the thesis research is to study novel schemes of on-chip crosstalk suppression employing magnetic films at microwave frequencies. Since extraction of various material properties of the magnetic films is essential for successful application of the proposed method, the research also involves development of a new material...
This thesis presents a Z-parameter based model to predict the substratenoise coupling between two contacts in a heavily doped substrate for frequenciesless than 2 GHz. The empirical model is scalable with contact size and spacingsbetween the contacts and model parameters can be readily extracted from simu-lated or measured data. The...
Three types of low noise amplifiers operating at 2.4GHz were designed. They are the commonly used single-ended and differential amplifiers as well as a new quasi-differential amplifier. The substrate noise injected into these amplifiers is examined for both heavily and lightly doped CMOS substrates. For the single-ended amplifier the noise...
There is a large and growing market for portable consumer audio products
with very small size. As the size of these products is reduced, the area occupied
by batteries becomes significant and hence limits the number of batteries to one.
In order to build such small products, high levels of...
The purpose of the thesis is to design, construct,
program, and test an automatic integrated circuit test
system. The class of integrated circuits tested was restricted
to digital integrated circuits. The general concept
of testing a digital integrated circuit is based on
the truth table of that circuit. A combination...
The object of this work was to design and fabricate an integrated circuit using Integrated Injection Logic. Integrated Injection Logic (I[superscript 2] L) is a relatively new field and has many inherent advantages. These have been exploited in this work. Logic for the desired functions was designed and implemented in...
The Focused Ion Beam (FIB) tool is a versatile instrument for nano-machining in
circuit editing. Circuit editing is one of the most important steps in the design of an
electronic circuit on a chip. Circuit editing can be improved by imaging of silicon
plates and analyzing the resultant images. However...
