Modern wireless System-on-Chips (SoCs), such as mobile handsets, sensor networks, and mm-wave systems, integrate an entire RF system on a single CMOS chip. Such highly complex systems require significant on-chip digital signal processing to help improve the performance of highly sensitive analog/RF components. The IC
market being competitive, the ability...
In this thesis work, a design of 14-bit, 20MS/s segmented digital-to-analog converter (DAC) is presented. The segmented DAC uses switched-capacitor configuration to implement 8 (LSB) + 6 (MSB) segmented architecture to achieve high performance for minimum area. The implemented LSB DAC is based on quasi-passive pipelined DAC that has been...
Ultra-wideband (UWB) radio has become an attractive alternative for wireless communications due to the robustness to multipath fading, low power transmission, mostly-digital implementation, and low cost. Furthermore, short-range, high data-rates applications are possible with UWB radios due to the wide spectral
allocations at 3.1 - 10.6 GHz.
This thesis presents...
The enormous success of wireless technology has recently led to an explosive demand for, and hence a shortage of, bandwidth resources. This expected shortage problem is reported to be primarily due to the inefficient, static nature of current spectrum allocation methods. As an initial step towards solving this shortage problem,...
Multi-Gigahertz sampling rate Analog-to-Digital Converters (ADC) with 5-8 bits resolution are used in many signal communication applications. Unfortunately, the performance of the high speed ADC is limited by the timing accuracy of the sampling clock. A small sampling uncertainty can cause a large error in the sampled voltage and result...
Short-range wireless communications continually attract interest from both industry and academia, and it is changing our life in every aspect in the last decade. The design of wireless transceivers is the bottleneck for variety applications, due to RF modeling inaccuracy, stringent FCC regulations over the transmitted power spectrum, interference, multi-path...
High speed serial links are critical components for addressing the growing demand for I/O bandwidth in next-generation computing applications, such as many-core systems, backplane and optical data communications. Due to continued process scaling and circuit innovations, today's CMOS serial link transceivers can achieve tens of Gb/s per pin. However, most...
As the demand for real-time information in engineering and health care systems keeps increasing, the need for wireless sensor nodes is also continuously increasing. As a result, the cost and effort involved in installing and maintaining batteries to power the numerous sensor nodes is growing exponentially. Providing a cost effective...
Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...
Digitally controlled switching DC-DC converters have recently emerged as an attractive alternative to conventional switching converters based on analog control techniques. This research focuses on eliminating the issues associated with the state of the art switching converters by proposing three novel control techniques: (1) a digitally controlled Buck-Boost converter uses...