Nowadays, needs for wideband and high accuracy analog-to-digital converter are increasing rapidly in manifold applications such as wireless communication, digital video and other consumer electronics. Besides, low power consumption is required to have longer battery life in portable systems. CMOS technology scaling and innovative modulator topology make the implementation much...
Successive approximation register analog-to-digital converters (SAR ADCs) have been widely used for medium-speed, medium-resolution applications due to their excellent power efficiency and digital compatibility. Recently, SAR ADCs are also penetrating into the applications which have been earlier dominated by delta-sigma ADCs and pipeline ADCs. However, the resolution of SAR ADCs...
Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
Incremental ADCs (IADCs) have many advantages for low-frequency high-accuracy data conversion—they are easy to multiplex between channels, need simpler digital decimation filter, and allow extended counting with a Nyquist-rate ADC. A single-loop incremental ADC was designed and fabricated in 90 nm for a biosensor interface circuit. It incorporates one integrator,...
The release of the IEEE802.15.6 standard has led to increased interest in low-power technologies for wireless body-area-networks (WBANs). The power dissipation, supply voltage, and die area are some of the most important criteria for successful WBAN implementations. Digital-intensive RX architectures can potentially result in sub-1V operation with significant reductions in...
IC designers are continuously facing the challenges from reduced CMOS feature sizes and supply voltages. ADCs that deliver satisfactory resolutions/speeds while utilizing the state-of-the-art technologies to save power are in high demand. The analog circuits are more and more assisted by various digital calibration techniques to get boosted performances. This...
This dissertation presents two high-speed pipeline successive approximation analog-to-digital converters (SAR ADCs). Capacitive DACs and resistive DACs are utilized in these two pipeline SAR ADCs, respectively.
The pipeline SAR ADC with capacitive DACs can save 50% switching power compared with other time-interleaved SAR ADCs since the total capacitance of the...
Delta-sigma analog-to-digital converters traditionally have been used for low speed, high resolution applications such as measurements, sensors, voice and audio systems. Through continued device scaling in CMOS technology and architectural and circuit level design innovations, they have even become popular for wideband, high dynamic range applications such as wired and...
This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
As CMOS processes keep scaling down devices, the maximum operating frequencies of CMOS devices increase, and hence circuits can process very wide band signals. Moreover, the small physical dimensions of transistors allow the placing of many more blocks into a single chip, including highly accurate analog blocks and complicated digital...