High-pressure torsion (HPT) is an effective severe plastic deformation (SPD)
technique to produce bulk nanostructured materials (BNMs). These BNMs often show a combination of exceptional mechanical and physical properties. Processing of single metals and alloys by HPT has been understood that the homogenous microstructures can be achieved throughout the disk...
Aluminum alloys are popular in aerospace and automotive industries because of their relatively high strength-to-weight ratio. The study of enhancing aluminum’s mechanical properties through grain refinement is especially important. One such technique is High-Pressure Torsion processing (HPT), which leads to significant grain size refinement and enhances mechanical properties like ductility...
Processing of metals through the application of high-pressure torsion (HPT) provides significant grain refinement in bulk metals at ambient temperatures. The ultrafine-grained (UFG) materials processed by HPT generally demonstrate the superior physical and mechanical characteristics. For utilizing the benefit of HPT, the feasibility of conventional HPT processing was demonstrated recently...
High entropy alloys (HEAs) are well known for their excellent mechanical properties compared to conventional metallic alloys. The application of High-Pressure Torsion (HPT) processing reduces grain size of materials away below 1 µm. This significant grain refinement leads to an improvement in mechanical properties, such as strength and ductility. In...
Aluminum and copper and their alloys have been widely used due to relatively high strength-to-weight ratios compared with conventional steels. Processing of these alloys is typically conducted at high temperatures over extended time periods. High-pressure torsion (HPT) is a promising processing technique for introducing significant grain refinement leading to excellent...
This thesis consists of three manuscripts related to the methodology of evaluating charring behavior in cross laminated lumber panel specimens subjected to fire performance tests on cross-laminated lumber panel specimens. The topic of the first manuscript is the measurement of char rates of unprotected CLT layups fabricated with ponderosa pine...
The aim of this work was to assess the viability of duplex stainless steel 2205 components built via selective laser melting for seawater applications. First, a comprehensive additive manufacturing assessment was done. The duplex stainless steel 2205 components were selectively laser melted from gas atomized powder (D90 <45m) using a...
Digital image correlation (DIC) uses pairs of images, one in a reference state and one after in situ manipulation of the object, to measure full-field displacements and strains by tracking the motion of small image subsets. Subset selection is always a crucial part of DIC technique as it has a...
While electrification is currently one of the largest trends in the automotive world, other related industries are also evaluating electrification opportunities as a means to reduce environmental impact, emissions, and noise pollution. One such sector is the aviation industry. While it is generally accepted that all-electric aircraft are not a...
High-pressure torsion (HPT) is used to investigate the formation of a new metal system by the direct bonding of separate disks of Al and Cu by processing at room temperature under a compressive pressure of 6.0 GPa and with increasing numbers of HPT turns up to 60. A detailed examination...