Index Catalog // ScholarsArchive@OSU

Lateral force resisting pathways in log structures

Creator:: Scott, Randy J.
Abstract:: In recent years, log structures have been marketed as an alternative to conventional light-frame wood structures. Log structures are constructed using round timbers (or manufactured timbers) that are stacked vertically and have interlocking corners. Thru-rods and lag screws are used to provide inter-log connections. This project was conducted to evaluate...
Resource Type:: Masters Thesis

Buckling of sandwich cylinders of finite length under uniform external lateral pressure

Creator:: Forest Products Laboratory (U.S.) and Raville, Milton E.
Abstract:: Information reviewed and reaffirmed in 1960.
Resource Type:: Technical Report
Full Text:: critical load on circular sandwich cylinders of finite length subjected to uniform external lateral

Effect of lateral force on passenger comfort during a mechanically assisteddependent transfer

Creator:: Mast, Jonathan J.
Abstract:: Air travel presents several problems for passengers with disabilities. One in particular is how they get from their wheelchair and to an aircraft seat. The commonly used manual transfer method is hazardous to the assistants and the passenger. There are other alternatives, but they have plenty of room for improvement....
Resource Type:: Masters Thesis
Full Text:: . TITLE: Effect of Lateral Force on Passenger Comfort during a Mechanically Assisted Dependent Transfer

Wrinkling of the facings of sandwich construction subjected to edgewise compression : sandwich constructions having honeycomb cores

Creator:: Forest Products Laboratory (U.S.), Norris, Charles, B. (Charles Brazer), 1894-, Boller, Kenneth H., and Voss, Arnold W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: perfectly flat, so that deflections occur at small loads and increase more and more rapidly as the load

Response of timber joints with metal fasteners to lateral-impact loads

Creator:: Forest Products Laboratory (U.S.) and Jordan, C. A.
Resource Type:: Technical Report
Full Text:: the input terminal of the other channel. Each load cell was calibrated in a standard testing ma- chine

Formulas for columns with side loads and eccentricity

Creator:: Wood, Lyman Wentsch, 1899- and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: accuracy have been developed for long columns with eccen- tric end load or with certain specific

Lateral Load Path Analysis : Practical Methods for Light-Frame Modular Structures

Creator:: Huynh, Thanh Q.
Abstract:: The objectives of this study are to use SAP2000 to investigate lateral load paths and system behavior in a modular, light-frame wood structure by investigating different foundation configurations and to further develop and validate existing modeling techniques of shear wall elements based on the Perforated Shear Wall Method. The modeling...
Resource Type:: Masters Thesis
Full Text:: and Civil Engineering presented on June 2, 2016 Title: Lateral Load Path Analysis: Practical

Effects of soil slope on the lateral capacity of piles in cohesionless soils

Creator:: Barker, Paul D.
Abstract:: Deep foundations, including driven piles, are used to support vertical loads of structures and applied lateral forces. Many pile supported structures, including bridges, are subjected to large lateral loads in the form of wind, wave, seismic, and traffic impact loads. In many practical situations, structures subjected to lateral loading are...
Resource Type:: Masters Thesis
Full Text:: ................................................................................................. 71 4.7 TABLE OF CONTENTS (Continued) Page LATERAL LOAD TESTING

Effects of soil slope on lateral capacity of piles in cohesive soils

Creator:: Nimityongskul, Nontapat
Abstract:: Pile supported bridges are typically constructed near or in a natural or man-made slope and are subjected to lateral loading. The current design method for laterally loaded piles involves the use of Winkler's spring concept with the standard nonlinear p-y curves. The available p-y curves were developed based on results...
Resource Type:: Dissertation
Full Text:: .............................................................114 6. LATERAL LOAD ANALYSES

Theoretical design of a nailed or bolted joint under lateral load

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: Originally issued in September 1953. Revised March 1955. Information reviewed and reaffirmed 1960.
Resource Type:: Technical Report
Full Text:: THEORETICAL DESIGN OF A NAILED OR HATED JOINT UNDER LATERAL LOAD

ScholarsArchive@OSU

Lateral force resisting pathways in log structures

Buckling of sandwich cylinders of finite length under uniform external lateral pressure

Effect of lateral force on passenger comfort during a mechanically assisteddependent transfer

Wrinkling of the facings of sandwich construction subjected to edgewise compression : sandwich constructions having honeycomb cores

Response of timber joints with metal fasteners to lateral-impact loads

Formulas for columns with side loads and eccentricity

Lateral Load Path Analysis : Practical Methods for Light-Frame Modular Structures

Effects of soil slope on the lateral capacity of piles in cohesionless soils

Effects of soil slope on lateral capacity of piles in cohesive soils

Theoretical design of a nailed or bolted joint under lateral load

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search