This thesis project provides a guiding framework for the structural analysis portion of the National Concrete Canoe Competition (NCCC). Step-by-step instructions on how to 3-dimensionally model a “standard” sized concrete canoe in AutoCAD Civil 3D, import the model into SAP2000, and proceed to analyze the canoe with the SAP2000 finite...
Aesthetics should be emphasized as much as possible in a design project without
exceeding scope, budget, or schedule to satisfy the stakeholders involved. There
is a rising trend of increased emphasis on aesthetics. This trend of using various
techniques to help structures blend in or contribute to the surrounding
environment...
The objective of this study was to investigate load paths in an existing light-frame wood structure with complex geometry, using previously established computer modeling methods. The structural model is derived from an existing, multi-level residence located in Corvallis, Oregon. For the purpose of this study, the existing structure was simplified...
Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
The objectives of this study are to use SAP2000 to investigate lateral load paths and system behavior in a modular, light-frame wood structure by investigating different foundation configurations and to further develop and validate existing modeling techniques of shear wall elements based on the Perforated Shear Wall Method. The modeling...
Recent studies have shown that there is a significant amount of dissatisfaction and
stress associated with finances, job security, and work. There are many health related
consequences that manifest in response to this continual stress that we experience in
our professional lives. These include obesity, high blood pressure, high cholesterol,...
Stability analysis of truss chords loaded by a
combination of axial and lateral forces is studied. A
simple model based on beam-column theory is proposed and
analyzed. The continuous truss chord is replaced by a beam column
loaded by end moments replacing the effect of
adjacent members. The solution yields...
This study consists of three parts: 1) Part A: Limiting Height Evaluation for
Composite Wall Tests, 2) Part B: Mid-Span Deflection Evaluation for Composite Wall
Tests, and 3) Part C: Nominal Axial Strength Evaluation for Wall-Braced Wall Stud
Columns.
The purpose of Part A is to develop experimentally-based limiting heights...
The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...