With the continued decrease in size and subsequent increase in power of computer processors, thermal management in electronics is becoming more important than ever before. The chip heat densities are reaching new peaks (> 100 W cm-2) that current cooling methods are not able to keep up with. However, some...
Hydrogels have been attractive for use as a medium in porous flow studies,
but have always been limited in this role because of their poor mechanical properties.
This project analyzes and tests two recently developed hydrogels,
poly(methacrylamide-co-methacrylic acid) (PMM), and a heat-treated long chain
PVA hydrogel. Particle image velocimetry (PIV)...
The application of a flapping foil with prescribed trailing edge motion to energy harvesting in a low reduced frequency (k = fc/U∞) regime was experimentally studied. The effects of the phase and amplitude of the applied trailing edge motion upon time-variant power extraction capability have been measured and are interpreted....
The next generation of nuclear safety analysis computer codes will require detailed
modeling of two-phase fluid flow. The most complete and fundamental model used for
these calculations is known as the two-fluid model. It is the most accurate of the two-phase
models since it considers each phase independently and links...
As drop-on-demand (DOD) applications continue to gain ground in desktop inkjet-printing, 3D printing, fluid mixing, and other areas the demand for higher frequency operations are beginning to push against the current physical boundaries in DOD technology. The current research is exploring the possibility of controlling drop volume and velocity at...
The pressure drop of convective boiling flow may be reduced by extracting vapor locally since the entire generated vapor does not have to travel through the entire channel length. In this study, the theoretical model was developed to simulate a convective boiling flow through a fractal-like branching microchannel network with...
Based on experimental investigations the present study evaluates flow instability and
void fraction in a fractal-like branching microchannel network with rectangular cross-section. The hydraulic diameter of the channels ranged from 308μm at the inlet to 143μm at the outlet. The flow network used is characterized by set branching ratios for...
There is a pressing need for Micro Air Vehicles (MAV) that are light, powerful, and efficient to perform military reconnaissance missions and search and rescue operations. These MAVs have length scales on the order of 10 cm, where traditional steady flight wing designs perform poorly. An alternative flight mechanism is...
During spring and early summer hydropower projects are often forced to spill water through their spillways due to increased river flows of the runoff season. Flows which are directed through spillways--instead of through turbines--contain a substantial amount of energy. Stemming from the high energy content, spillway flows entrain air at...
The research presented in this thesis is a continuation of collaboration between Oregon State University and Auburn University studying the feasibility of passively pumping liquid during boiling in a preferential direction using meso-scaled asymmetric surface patterns. Such a passive phase-change mechanism has great potential for thermal management in spacecraft and...