DuXiaosongChemBioEnvEngFabricationFlexible.pdf

Citeable URL: https://ir.library.oregonstate.edu/concern/articles/0r967539q

Descriptions

Attribute Name	Values
Creator	Du, Xiaosong Durgan, Christopher J. Matthews, David J. Motley, Joshua R. Tan, Xuebin Pholsena, Kovit Árnadóttir, Líney Castle, Jessica R. Jacobs, Peter G. Cargill, Robert S. Ward, W. Kenneth Conley, John F., Jr. Hermana, Gregory S.
Abstract	This study details the use of printing and other additive processes to fabricate a novel amperometric glucose sensor. The sensor was fabricated using a Au coated 12.7 μm thick polyimide substrate as a starting material, where micro-contact printing, electrochemical plating, chloridization, electrohydrodynamic jet (e-jet) printing, and spin coating were used to pattern, deposit, chloridize, print, and coat functional materials, respectively. We have found that e-jet printing was effective for the deposition and patterning of glucose oxidase inks with lateral feature sizes between ∼5 to 1000 μm in width, and that the glucose oxidase was still active after printing. The thickness of the permselective layer was optimized to obtain a linear response for glucose concentrations up to 32 mM and no response to acetaminophen, a common interfering compound, was observed. The use of such thin polyimide substrates allow wrapping of the sensors around catheters with high radius of curvature ∼250 μm, where additive and microfabrication methods may allow significant cost reductions.
Urheberrechts-Erklärung	Copyright Not Evaluated