Article
 

A direct comparison of non-destructive techniques for determining bridging stress distributions

Public Deposited

Downloadable Content

Download PDF
https://ir.library.oregonstate.edu/concern/articles/qv33rx34c

Descriptions

Attribute NameValues
Creator
Abstract
  • Crack bridging is an important source of crack propagation resistance in many materials and the bridging stress distribution as a function of crack opening displacement is widely believed to represent a true material property uninfluenced by sample geometry, loading conditions, and other extrinsic factors. Accordingly, accurate measurement of the bridging stress distribution is needed and many non-destructive methods have been developed. However, there are many challenges to accurately determining bridging stresses. A comparison of bridging stresses measured using R-curve, crack opening displacement (COD), and spectroscopy methods has been made using two bridging ceramics, Y₂O₃ and MgO doped Si₃N₄ and 99.5% pure Al₂O₃. The COD method is surface sensitive and gives a lower peak bridging stress compared to the R-curve technique which samples through the entire material thickness. This is attributed to a more compliant near surface bridging zone. Conversely, when R-curves rise steeply over the first few micrometers of growth from a notch, an effect of negative T-stress is expected to raise the R-curve determined peak bridging stress. Spectroscopy methods were only found to yield reliable bridging stress results if a reasonable through thickness volume of material is sampled. It was found that 2.5% of the specimen thickness achieved using fluorescence spectroscopy appears adequate for Al₂O₃ while 0.1–0.2% of the sample thickness achieved using Raman spectroscopy for Si₃N₄ appears inadequate. Overall, it is concluded that in the absence of T-stresses a bridging distribution can be determined that is a true material property. Also, a new method is proposed for determining the bridging stresses of fatigue cracks from (1) the bridging stress distribution for monotonically loaded cracks and (2) experimental fatigue data.
  • Keywords: R-curves, Fracture mechanisms, Bridging stress distribution, T-stress, Ceramic material
  • Keywords: R-curves, Fracture mechanisms, Bridging stress distribution, T-stress, Ceramic material
Resource Type
DOI
Date Available
Date Issued
Citation
  • Greene, R., Gallops, S., Funfschilling, S., Fett, T., Hoffmann, M., Ager, J., & Kruzic, J. (2012). A direct comparison of non-destructive techniques for determining bridging stress distributions. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 60(8), 1462-1477. doi: 10.1016/j.jmps.2012.04.007
Journal Title
Journal Volume
  • 60
Journal Issue/Number
  • 8
Rights Statement
Funding Statement (additional comments about funding)
  • J.J. Kruzic, R.B. Greene, and S. Gallops would like to acknowledge support from the National Science Foundation CAREER Award No. 0547394. S. Funfschilling and M.J. Hoffmann would like to thank the Deutsche Forschungsgemeinschaft DFG for financing parts of this work within the SFB 483.
Publisher
Peer Reviewed
Language
Replaces

Relationships

Parents:

This work has no parents.

Items