Article
 

Dynamic range and sensitivity requirements of satellite ocean color sensors: learning from the past

Public Deposited

Downloadable Content

Download PDF
https://ir.library.oregonstate.edu/concern/articles/bk128g95q

Descriptions

Attribute NameValues
Creator
Abstract
  • Sensor design and mission planning for satellite ocean color measurements requires careful consideration of the signal dynamic range and sensitivity (specifically here signal-to-noise ratio or SNR) so that small changes of ocean properties (e.g., surface chlorophyll-a concentrations or Chl) can be quantified while most measurements are not saturated. Past and current sensors used different signal levels, formats, and conventions to specify these critical parameters, making it difficult to make cross-sensor comparisons or to establish standards for future sensor design. The goal of this study is to quantify these parameters under uniform conditions for widely used past and current sensors in order to provide a reference for the design of future ocean color radiometers. Using measurements from the Moderate Resolution Imaging Spectroradiometer onboard the Aqua satellite (MODISA) under various solar zenith angles (SZAs), typical (L[subscript typical]) and maximum (L[subscript max]) at-sensor radiances from the visible to the shortwave IR were determined. The L[subscript typical] values at an SZA of 45° were used as constraints to calculate SNRs of 10 multiband sensors at the same L[subscript typical] radiance input and 2 hyperspectral sensors at a similar radiance input. The calculations were based on clear-water scenes with an objective method of selecting pixels with minimal cross-pixel variations to assure target homogeneity. Among the widely used ocean color sensors that have routine global coverage, MODISA ocean bands (1 km) showed 2–4 times higher SNRs than the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) (1 km) and comparable SNRs to the Medium Resolution Imaging Spectrometer (MERIS)-RR (reduced resolution, 1.2 km), leading to different levels of precision in the retrieved Chl data product. MERIS-FR (full resolution, 300 m) showed SNRs lower than MODISA and MERIS-RR with the gain in spatial resolution. SNRs of all MODISA ocean bands and SeaWiFS bands (except the SeaWiFS near-IR bands) exceeded those from prelaunch sensor specifications after adjusting the input radiance to L[subscript typical]. The tabulated L[subscript typical], L[subscript max], and SNRs of the various multiband and hyperspectral sensors under the same or similar radiance input provide references to compare sensor performance in product precision and to help design future missions such as the Geostationary Coastal and Air Pollution Events (GEO-CAPE) mission and the Pre-Aerosol-Clouds-Ecosystems (PACE) mission currently being planned by the U.S. National Aeronautics and Space Administration (NASA).
Resource Type
DOI
Date Available
Date Issued
Citation
  • Hu, C., Feng, L., Lee, Z., Davis, C. O., Mannino, A., McClain, C. R., & Franz, B. A. (2012, September 1). Dynamic range and sensitivity requirements of satellite ocean color sensors: learning from the past. Applied Optics, 51(25), 6045-6062. doi:10.1364/AO.51.006045
Journal Title
Journal Volume
  • 51
Journal Issue/Number
  • 25
Academic Affiliation
Rights Statement
Funding Statement (additional comments about funding)
  • This work was supported by the state of Florida, theU.S. NASA Ocean Biology and Biogeochemistry (OBB) program and the Water and Energy Cycle program. Support of L. Fenghas been provided by an education program for visiting and exchanging students.
Publisher
Peer Reviewed
Language
Replaces

Relationships

Parents:

This work has no parents.

Items

Thumbnail Title Date Uploaded Visibility Actions
file details DavisCurtissCEOASDynamicRangeSensitivity.pdf 2017-12-06 Public Download