Graduate Thesis Or Dissertation
 

High-linearity switched-capacitor circuits in digital CMOS technologies

Público Deposited

Contenido Descargable

Descargar PDF
https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/37720f95t

Descriptions

Attribute NameValues
Creator
Abstract
  • In this thesis, novel design techniques have been proposed for implementing high-linearity SC circuits in a standard digital CMOS process. They use nonlinear MOSFET capacitors instead of linear double-poly capacitors. To reduce their nonlinearities, a bias voltage is applied to keep MOSFET capacitors in their accumulation regions. For further reduction of distortion, two capacitors can be connected in series or in parallel so that a first-order cancellation of the nonlinearity can be achieved. Experimental results demonstrated that the among these techniques series compensation is the most effective for reducing the nonlinearity of MOSFET capacitors. A novel predictive SC amplifier has been proposed for its insensitivity to op-amp imperfections. Experimental results show that the S/THD of the predictive SC amplifier was 10 dB larger than that of the non-predictive one. It was also shown that a predictive circuit was effective for reducing the nonlinearity caused by the op-amp and/or the MOSFET capacitors. It has been demonstrated that a two-stage op-amp with a large output swing can be fabricated in a standard digital CMOS process. The frequency compensation was accomplished using a source follower and a MOSFET capacitor. An SC amplifier using this two-stage op-amp and double-poly capacitors was fabricated, and it exhibited a large linear output range. A MOSFET-only digitally controlled gain/loss circuit was designed and fabricated in a 1.2μ CMOS process. It demonstrated that the series compensation is effective not only for a large output swing in an amplifier, but also for a large input swing in an attenuator. A pipeline D/A converter utilizing MOSFET capacitors was designed as another application of charge processing technique. It consisted of three parts: a V-Q conversion stage, a charge transfer stage, and a Q-V converter. A new switch configuration which enables the series compensation to have a large bias voltage has also been proposed. It was shown that it works well, and it will be helpful for low-voltage operation, too.
Resource Type
Fecha Disponible
Fecha de Emisión
Degree Level
Degree Name
Degree Field
Degree Grantor
Commencement Year
Advisor
Committee Member
Academic Affiliation
Non-Academic Affiliation
Subject
Declaración de derechos
Publisher
Peer Reviewed
Language
Digitization Specifications
  • File scanned at 300 ppi (Monochrome, 8-bit Grayscale) using ScandAll PRO 1.8.1 on a Fi-6670 in PDF format. CVista PdfCompressor 4.0 was used for pdf compression and textual OCR.
Replaces

Relaciones

Parents:

This work has no parents.

En Collection:

Elementos

Miniatura Título Fecha de subida Visibilidad Acciones
file details YoshizawaHirokazu1998.pdf 2017-08-03 Público Descargar