General pole number model for the brushless doubly-fed machine Public Deposited

http://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/br86b6438

Descriptions

Attribute NameValues
Creator
Abstract or Summary
  • The Brush less Doubly-Fed Machine (BDFM) has the potential to be a more cost effective replacement for conventional induction or synchronous machine drives. The BDFM has two stator windings: a power winding and a control winding. An electronic power converter of variable voltage and frequency is connected to the control winding and allows the speed of the machine to be adjusted synchronously. The power winding, by design, carries the majority of the current needed for operation, the control winding only a fraction of the current, thus enabling the converter rating to be as low as 25% of the rating of the machine depending on the speed range of operation. To date, only one specific stator pole-pair combination has been investigated, namely the 3/1 combination, where 3 and 1 refer to the power winding pole-pairs and the control winding pole-pair, respectively. Since the speed of the machine is dependent on the sum of the pole-pairs of the stator windings, a general pole numbered model is needed to evaluate the performance of such general machines with other pole-pair number machines. The BDFM describing system equations are transformed to the two axis (dq) rotor reference frame using a power invariant transformation. The analysis shows an additional term involving the common bar impedance which was not present in earlier analyses. The dynamic model is simplified to yield a steady state synchronous model. The synchronous frequency of analysis is investigated which results in two equivalent steady state models. The models developed can easily handle excitation of any frequency or sequence on the control winding without the use of an auxiliary model as used in previous analyses. The voltage forced model predictions match data taken for a 5 hp BDFM laboratory prototype, establishing the validity of the analysis. The model is used in illustrating the torque producing capabilities and unity power factor operation of the machine under a variety of inputs. Using the model, predictions are made on a different pole-pair combination machine (4/2 BDFM) for use as a 60 hp pump drive as an alternative to a 3/1 BDFM for the same application.
Resource Type
Date Available
Date Copyright
Date Issued
Degree Level
Degree Name
Degree Field
Degree Grantor
Commencement Year
Advisor
Academic Affiliation
Non-Academic Affiliation
Subject
Rights Statement
Peer Reviewed
Language
Digitization Specifications
  • File scanned at 300 ppi (Monochrome, 256 Grayscale) using Capture Perfect 3.0 on a Canon DR-9050C in PDF format. CVista PdfCompressor 4.0 was used for pdf compression and textual OCR.
Replaces
Additional Information
  • description.provenance : Approved for entry into archive by Patricia Black(patricia.black@oregonstate.edu) on 2012-11-26T22:30:24Z (GMT) No. of bitstreams: 1 BogerMichaelS1995.pdf: 3377745 bytes, checksum: f9ce38230a49b3a9093a233e5ce62b68 (MD5)
  • description.provenance : Approved for entry into archive by Patricia Black(patricia.black@oregonstate.edu) on 2012-11-14T22:54:06Z (GMT) No. of bitstreams: 1 BogerMichaelS1995.pdf: 3377745 bytes, checksum: f9ce38230a49b3a9093a233e5ce62b68 (MD5)
  • description.provenance : Submitted by Kirsten Clark (kcscannerosu@gmail.com) on 2012-11-12T20:24:07Z No. of bitstreams: 1 BogerMichaelS1995.pdf: 3377745 bytes, checksum: f9ce38230a49b3a9093a233e5ce62b68 (MD5)
  • description.provenance : Made available in DSpace on 2012-11-26T22:30:24Z (GMT). No. of bitstreams: 1 BogerMichaelS1995.pdf: 3377745 bytes, checksum: f9ce38230a49b3a9093a233e5ce62b68 (MD5) Previous issue date: 1994-07-06

Relationships

In Administrative Set:
Last modified: 08/09/2017

Downloadable Content

Download PDF
Citations:

EndNote | Zotero | Mendeley

Items