Graduate Thesis Or Dissertation
 

Evaluation of remediation techniques for circular holes in the webs of wood I-joists

Public Deposited

Downloadable Content

Download PDF
https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/jh343x62j

Descriptions

Attribute NameValues
Creator
Abstract
  • The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with varying flange widths and two span lengths (4.88 m & 2.44 m). Failure modes for the long span joists without holes were in the flanges in either tension, compression or lateral buckling; but once a hole was introduced the majority were classified as shear failures. Effectiveness of the remediation was evaluated based on three criteria: strength, stiffness, and ease of installation/cost. The OSB collar patch was effective for 8 out of the 12 series tested. A maximum reduction of load from a joist with no hole to one with a hole was 49% for the long span and 58% for the short span. The OSB collar was not as effective in returning stiffness to the joists, but was easier to install and less expensive than the LSL patch.
License
Resource Type
Date Available
Date Issued
Degree Level
Degree Name
Degree Field
Degree Grantor
Commencement Year
Advisor
Committee Member
Academic Affiliation
Non-Academic Affiliation
Subject
Rights Statement
Publisher
Peer Reviewed
Language
Replaces

Relationships

Parents:

This work has no parents.

In Collection:

Items