This thesis is comprised of two manuscripts based on a laboratory experiment conducted to examine realistic wave forcing on a vertical wall subjected to tsunami loading. The first manuscript examined tsunami force and pressure distributions on a rigid wall that was fronted by a small seawall. Six different seawall heights...
The use of data extracted from particle image velocimetry (PIV) along with vector and tensor visualization techniques provides a valuable tool for understanding a complex flow field. By studying a simple geometric structure such as a cylinder under a simple transient waveform, fundamental mechanisms of wake development under solitary wave...
Originally used as a method to densify loose soils, controlled blasting has expanded its applicability to geotechnical engineering by becoming a research tool to physically generate liquefaction for full-scale in-situ tests, ranging from seismic performance of deep foundations to evaluating ground improvement techniques. Current methods used to design the blasting...
Different specimen preparation methods such as moist tamping, dry funnel deposition, slurry deposition, dry air pluviation have been reported in the literature to investigate the undrained behavior of silty sands. Similarly, different means have been used to densify the soils prepared with such methods. However, the influence of the densification...
Posting advisory speed signs at sharp horizontal curve locations is a common practice in the U.S. These signs recommend drivers safe speeds to negotiate such curves. Literature indicates that adherence to advisory speeds is, in general, poor. Moreover, limited research is available that quantifies safety implications of these signs. This...
This dissertation presents the results of a research effort conducted to better understand the stress-strain, volume change, shear band formation, and strength characteristics of normally consolidated anisotropic clay under fully three-dimensional stress states. A series of consolidated drained true triaxial tests with a constant mean effective stress and constant Lode...
Alkali-silica reaction (ASR) is one of the leading causes of concrete deterioration throughout the world, and affects both structural and non-structural elements. Despite strong research efforts since its discovery by Stanton in the late 1930s, this deteriorating reaction is still not clearly understood nor are proper preventative measures effectively applied...
Infrastructures along the Oregon Coast are vulnerable to seismic events in the Cascadia Subduction Zone that could generate large tsunamis. Bridges along the coast are an important part of the transportation and lifeline system in the area. The major damages on these bridges due to earthquake and/or tsunami would result...
Over the last decade the world has seen three major tsunamis strike the coasts of
Indonesia, Samoa, and Chile. These tsunamis have caused significant losses of life and
property on the coastal cities of these and nearby countries. The NEES (Network for
Earthquake Engineering Simulation) Housesmash project was created to...
Fluid-structure interaction (FSI) is a very interesting and challenging multi-disciplinary field involving interaction of a movable or deformable structure with an internal or surrounding fluid flow. FSI plays a pivotal role in many different types of real-world situations and practical engineering applications involving large structural deformation and material or geometric...
Pile supported bridges are typically constructed near or in a natural or man-made
slope and are subjected to lateral loading. The current design method for laterally loaded
piles involves the use of Winkler's spring concept with the standard nonlinear p-y curves.
The available p-y curves were developed based on results...
Coastal foredunes protect lives, infrastructure, and ecosystems during severe winter storms. In the U.S. Pacific Northwest (PNW), coastal foredune geomorphology is determined by both physical and ecological mechanisms. Before the 1900's, the native plant Elymus mollis was the dominant dune grass and dune morphology was largely determined by sediment supply...
This thesis is comprised of a manuscript based on a laboratory experiment run in the Tsunami Wave Basin as part of a research project funded by the Network for Earthquake Engineering Simulation called Housesmash. The purpose of the experiment was to better understand the role of the urban environment, represented...
Straw wattles are common erosion control devices used to trap sediment. This
thesis studies the relationship of straw wattles on slope stability through a case study
demonstrating their use on steep slopes (1.5H:1V) for the US20 highway realignment
project. Several surficial slope failures have occurred on these fill slopes, often...
This thesis documents the evaluation of the initial performance of pavement
containing recycled asphalt shingles (RAS) in Oregon. The research was funded
by the Oregon Department of Transportation (ODOT) and the Federal Highway
Administration and was conducted at Oregon State University. The key
objectives of this thesis are to document...
An intersection, due to its vehicle and pedestrian conflict movements, experiences complex traffic situations that might contribute to crashes. In the city of Corvallis, OR, historically more than 80% of the total crashes have occurred within an intersection or have been designated as intersection-related. It is important to develop a...
Knowledge of wave conditions in nearshore regions supports the development of
ocean wave energy technology by providing wave climatology for device design
considerations, and power output estimates. By modeling wave transformation
over the continental shelf, wave conditions were predicted in nearshore regions
where potential wave energy conversion sites are located....
Designing for construction safety is part of standard practice in countries such as the UK, Australia, and South Africa. Designing the permanent facility in a manner to eliminate or reduce the risks of injury, illness, or fatality of construction workers is defined as designing for construction safety (DfCS). Although evident...
In response to the growing environmental concern and higher operating cost of regular automobile, the concept of Low-Speed Vehicles (LSVs) is becoming popular as a sustainable mode of transportation. Primarily designed for protected environments and gated communities, the use of these vehicles is gradually increasing on public roadways as a...
Carbon fiber reinforced polymer (CFRP) materials are emerging as an effective means of strengthening and rehabilitating bridges. Near surface mounting (NSM) is a newer technique for application of CFRP for retrofitting of bridge members that provides advantages over conventional strengthening techniques. The technique is still new and uncertainties remain regarding...
During the interstate expansion of the 1950s, many conventionally reinforced concrete
deck girder bridges were built throughout the country. These now vintage bridges
commonly exhibit diagonal cracking and rate inadequately for shear, thus they are
candidates for shear strengthening to extend their useful life. Near-surface mounted
(NSM) retrofitting is a...
Gap acceptance behavior is critical to the safety and operational performance of unsignalized intersections. The complex nature of the human behavior and its dependence on various socioeconomic and environmental parameters makes it challenging for transportation professionals to assess the performance of such intersections. To investigate the behavioral patterns of drivers...
In this dissertation the interactions between hydrodynamics, sediment suspension and transport, and morphological evolution in the surf zone was investigated with a large-scale laboratory experiment data, CROss-Shore Sediment Transport Experiment (CROSSTEX). The data set included comprehensive measurements of water surface elevation, fluid velocity, sediment concentration, and morphology for irregular waves...
Corrosion of reinforcement is recognized as the predominant factor that limits the service life of reinforced concrete (RC) structures exposed to aggressive environments. This corrosion deterioration can lead to damage resulting in capacity loss or even failure. For structures exposed to coastal marine environments or deicing or anti-icing applications, this...
The author of the Highway Safety Manual (HSM) Part B developed a predictive method for safety management. A software tool for highway safety system analysis called the SafetyAnalyst is developed basing on HSM Part B. The author describes an effort to evaluate the feasibility of SafetyAnalyst in Oregon. Seven sample...
High performance concrete (HPC) provides a long lasting, durable concrete that is typically used in bridge decks due to its low permeability, high abrasion resistance, freeze-thaw resistance and strength. However, this type of concrete is highly susceptible to the deleterious effects of both autogenous and drying shrinkage. Both types of...
Halogenated organic compounds have had widespread and massive applications in industry, agriculture, and private households, for example, as degreasing solvents, flame retardants and in polymer production. They are released to the environment through both anthropogenic and natural sources. The most common chlorinated solvents present as contaminants include tetrachloroethene (PCE, perchloroethene)...
Using recycled concrete aggregate (RCA) as a replacement for natural aggregate in new concrete is a promising way to increase the overall sustainability of new concrete. This has been hindered, however, by a general perception that RCA is a sub-standard material due to the lack of technical guidance, specifically related...
Deep foundations, including driven piles, are used to support vertical loads of structures and applied lateral forces. Many pile supported structures, including bridges, are subjected to large lateral loads in the form of wind, wave, seismic, and traffic impact loads. In many practical situations, structures subjected to lateral loading are...
The use of fly ash as a supplementary cementitious material (SCM) has increased in the last century due to its various environmental benefits as a recycled product. Within the last 60 years, it has been found that it can be used to effectively control damage induced by Alkali-Silica Reaction. However,...
Shallow foundations are extensively used to support structures of all sizes and derive their support from near surface soils. Thus, they are typically embedded up to a few meters into the soil profile. Designers of shallow foundations are required to meet two limit states: overall failure of the soil beneath...
Pile caps are structural elements used to transmit loads from structural columns into pile groups. A pile cap is generally constructed of reinforced concrete and contains only minimal flexural reinforcing steel. Using modern design methods, the anchorage of the flexural steel may limit the design capacity of existing pile caps....
The collapse of the I-35W Bridge in Minneapolis, MN on August 1, 2007 brought into question the design and inspection of gusset plates in steel truss bridges. The experimental tests performed in this research study the sway-buckling strength and behavior of large-scale steel gusset plates in an isolated truss connection....
Posting advisory speed signs at sharp horizontal curve sites is a practice well established in the United States. The purpose of these signs is to provide the driving public with a safe speed to negotiate such curves; however, the link between these signs and safety has not yet been clearly...
Helical anchors are a type of deep foundation element that can be installed quickly in almost any location and can accept the immediate application of operational loads. The use of helical anchors has expanded in recent decades from its established application in the power transmission industry to more traditional civil...
With the growing trend in use of 3D laser scanning technology for data collection, it is important to study the various potential applications of this revolutionary technology. One such application is the measurement of road roughness at both large and small scales. At larger extents, terrestrial laser scanning (TLS) is...
This thesis focuses on shared use lane facilities and road user understanding. Shared use lanes (sharrows) are a common solution for road facilities that are too narrow to accommodate a full bicycle lane and where the local jurisdiction wants to reduce dooring crashes. In recent years, engineers have focused on...
Throughout the Holocene, appreciable changes in bathymetry are hypothesized to have resulted in large changes to tidal datums in coastal and estuarine areas. An understanding of tidal change is an important contribution to the knowledge of relative historical sea-level change and future coastal planning. To test this hypothesis, the Advanced...
Operating speed is one of the best performance measures that can tell transportation agencies how well or how poorly the transportation system is functioning. Fluctuating operating speeds often mean there is a design flaw or something about the physical road design that violates drivers' expectations. A primary example of this...
Three-dimensional laser scanning has revolutionized spatial data acquisition and can be completed from a variety of platforms including airborne (ALS), mobile (MLS), and static terrestrial (TLS) laser scanning. MLS is a rapidly evolving technology that provides increases in efficiency and safety over static TLS, while still providing similar levels of...
This thesis explores the relationship between crime, transportation network connectivity, and engineered facilities built to increase walkability through a case study of twenty-five sites within the city of Spokane, Washington. Using data spanning between 2008 and 2010, the author developed a GIS model representing conditions of the built environment, social...
The Astoria-Megler Bridge is a 6.6 kilometer (4.1 mile) long bridge, connecting Oregon and Washington on US 101, with a continuous steel truss main span of 376 m (1232 ft). It is the second longest main span bridge of this type in the world. Due to vortex shedding, some of...
The Type-II dilemma zone refers to the segment of roadway approaching an
intersection where drivers have difficulty deciding to stop or proceed through at
the onset of the circular yellow (CY) indication. Signalized intersection safety can
be improved when the dilemma zone is correctly identified and steps are taken to...
The eventual deployment of wave energy converters (WECs) on a commercial scale will necessitate the grouping of devices into arrays or "wave farms," in order to minimize overhead costs of mooring, maintenance, installation, and electrical cabling for shoreward power delivery. Closely spaced WECs will interact hydrodynamically through diffracted and radiated...
This thesis investigates the effects of wave energy converters (WECs) on water waves through the analysis of extensive laboratory experiments, as well as subsequent numerical simulations. Data for the analysis was collected during the WEC-Array Experiments performed at the O.H. Hinsdale Wave Research Laboratory at Oregon State University, under co-operation...
Velocity measurements from drifter GPS records are assimilated and used in an ensemble-based inversion technique to extract the river bathymetry. The method is tested on a deep meandering reach and a shallow braided reach of the Kootenai River in Idaho, USA. The Regional Ocean Modeling System (ROMS) is used to...
As the second largest river in the U.S., the entrance to the Columbia River is home to some of the most extreme wave conditions on the Pacific Coast. Winter storms commonly generate waves 6-8 m in height, which in combination with strong tidal currents, can produce dangerous navigation conditions. To...
Driving simulation is widely accepted as a safe, effective, and economical alternative for investigating driver behavior in a variety of contexts. However, in order to apply simulator-based research results to real-world settings, the performance measures acquired through simulated driving experiments must first be validated. This research was aimed at validating...
This thesis contains a manuscript describing the implementation of a high resolution wave forecasting model for the coasts of Washington and Oregon. The purpose of this project was to advance the wave predictive capabilities of the states of Oregon and the southwest part of Washington by including the effects of...
At signalized intersections, pedestrians are considered to be amongst the most vulnerable. When in the crosswalk at intersections without protected left-turn phasing, pedestrians are particularly at risk from left-turning vehicles. Until recently, a wide variety of indications were in use across the US to indicate a permissive left-turn condition to...
Reflection of an obliquely incident solitary wave at a vertical wall is studied experimentally in the laboratory wave tank. Precision measurements of water-surface variations are achieved with the aid of laser-induced fluorescent (LIF) technique and detailed temporal and spatial features of the
Mach reflection are captured. During the development stage...
It has been suggested that projects in the construction industry are subject to risks more than other industries. However, there is often little parity in allocation of risks in the construction industry. Usually, project participants allocate risks by aversion where owners tend to shift risks to the primary contractor, who...
Roundabouts have become an alternative for traditional intersections due to the safer operational performance. Previous research has provided crash modification factors (CMFs) as a criterion based on before-after studies as to evaluate the safety performance of roundabouts. One drawback of assessment based on crash modification factors, however, is that a...
The trenchless technology known as pipe ramming for construction of culverts and buried pipes under roadways or other infrastructure has gained significant popularity due to its cost-effectiveness and ability to alleviate surface disruptions associated with open-cut trenching. Although the experience with pipe ramming is increasing, there has been remarkably little...
This thesis develops a framework for analyzing the application of commuter rail and
bus services between several small urban centers to enhance overall connectivity. The
study includes analyzing specific performance criteria for commuter rail service and
express bus service based on data from existing systems around the U.S. The study...
Open grid steel bridge decks have been in use for nearly a century. These open grid decks provide an economical and lightweight alternative to traditional reinforced concrete decks. As the transportation infrastructure continues to deteriorate, open grid decks can be used as a cost effective way to rehabilitate structurally deficient...
The 2004 Indian Ocean and 2011 Tohoku tsunami events have shown the destructive power of tsunami inundation to the constructed environment in addition to the tragic loss of life. A comparable event is expected for the Cascadia Subduction Zone (CSZ) which will impact the west coast of North America. Research...
Impact by an idealized shipping container on a column were observed for tsunami flow in a large-scale wave flume modeled at the O.H. Hinsdale Wave Research Laboratory at Oregon State University. Two specimen types, aluminum and acrylic, were tested; and each specimen was tested in two orientations, longitudinal and transverse....
The response of adjacent structural systems to earthquake motions is investigated using the finite element framework OpenSees. Results of sensitivity analyses demonstrate that structural response quantities can increase in either or both of the adjacent structures for specific configurations. The structural models used include steel moment-resisting frames and rigid shear...
Landslides are an insidious natural hazard, which can result in significant damage to public infrastructure. Limited monitoring tools are available, particularly tools suitable for use in forested environments. These tools often only allow a few locations across the slide to be monitored. Terrestrial Laser Scanning (TLS) shows promise as a...
To better understand the extreme local amplification of tsunami, the experimental investigation on counter-propagating solitary wave collisions over a horizontal bottom was conducted using the optical measurement techniques: Particle Image Velocimetry (PIV), and Laser Induced Fluoresce (LIF). Head-on collisions and oblique collisions of equal-amplitude as well as unequal-amplitude waves were...
Landslides are ubiquitous within the state of Oregon, imposing an annual estimated cost of more than $10 million. Weak, saturated soils at steep slopes combined with persistent rainfall throughout most of the year provide a dangerous environment for this natural disaster, particularly in western Oregon. This grim situation is intensified...
Driver distraction is a commonly observable phenomenon with a significant effect on the transportation network. Although the negative effects of driver distraction on safety are commonly studied, there has been little effort made to investigate the impacts of distraction on efficiency.
This study will examine driver behavior in standing queues...
In the field of civil infrastructure, bridge desks are typically constructed using high performance concrete (HPC). Concrete bridge decks demand qualities such as low permeability, high abrasion resistance, superior durability, and long design life. Over decades of field and laboratory experience, many HPC bridge decks have been found to be...
The hazards associated with tsunamis are well known and have been studied for decades. The majority of research is, however, focused on open coastlines which bear the brunt of a tsunamis force. Other regions that can be strongly impacted by a tsunami are large estuaries. Here, the tsunami encounters a...
Coastal vegetation dampens waves which can provide benefits to the local area, but existing literature shows large variations in the degree of wave height attenuation depending on plant properties and wave conditions. Better knowledge of how to predict the wave height decay accurately in different types of vegetation may help...
Highway construction projects require temporary changes in roadway characteristics, such as the number of operational lanes, lane path, lane width, shoulder width, and posted speed limit. These modifications which are often temporary in nature have the potential to impact driving performance. Many research efforts have focused on developing standards to...
Earthquake engineering analyses are often performed using shallow, crustal earthquake motions (e.g., 1940 El Centro). However, large areas of the world are subject to subduction zone earthquake motions (e.g., the Pacific Northwest). A subduction zone earthquake motion is characterized by its long duration (e.g., strong shaking lasts for more than...
Current bridge design codes do not account for the effects of duration of mega-thrust subduction zone earthquakes. Furthermore, codes and even recent performance-based design methodologies only make use of the peak response quantities (forces, displacements, and ductility demands) and do not account for the increased number of inelastic cycles that...
The re-introduction of large woody debris (LWD) into streams and rivers for stream restoration purposes is rapidly growing. Engineered log jams (ELJs) are man-made structures intended to mimic natural LWD structures, designed and installed to protect stream banks from erosion while increasing habitat diversity. Several studies have evaluated the flow...
The construction industry employs about 7% of the total US workforce, and yet it accounts for 15.7% of all occupational fatalities. Specifically in 2011, there were 721 deaths in construction, second only to transportation with 733. The cause of a large number of these construction deaths can be attributed to...
Failure of a gusset plate that caused the I-35W Bridge collapse in Minneapolis, MN resulted in mandated rating of connections by the Federal Highway Administration (FHWA). Rating connections requires material properties as an input. The material properties are generally reported on the available detailed drawings for bridges. However, some bridges...
In many geotechnical design situations involving tight right-of-way constraints, Mechanically Stabilized Earth (MSE) walls are often the most cost-effective and reliable earth retention technology among available alternatives. However, few well-documented case histories with detailed material testing, instrumentation programs and construction observation of performance are available in the literature. Despite the...
Augered cast-in-place piles, also known as ACIP piles, have been used for more than
seven decades in the United States and have gained in popularity due to their relatively
quick installation and cost-effectiveness. Owing to the reduced impact on the neighboring
environment as compared to some other deep foundation installation...
Green technology in the United States has been on the rise over the past few decades in the United States. However, certain green technologies have been developed in the absence of design standards. Ecoroofs, which are vegetated soil masses placed on the top of a building’s roof structure, present several...
In this study, a coupled potential flow-viscous flow model is used for numerical wave tank simulation. The solver satisfies all the requirements for such a simulation environment. The coupling scheme is based on a non-overlapping heterogeneous domain decomposition method. In this method, the flow domain consists of two subdomains. In...
The production of cement and concrete results in the production of large amounts of CO₂ emissions which can have significant negative environmental impacts. Using supplementary cementing materials (SCMs) as a cement replacement is an effective solution to reduce these negative environmental impacts, as most SCMs are waste by-products from other...
This thesis presents a novel approach for propagation of uncertainty in river systems. Errors in data observations and predictions (e.g., stream inflows), in model parameters, and resulting from the discretization of continuous systems, all point to the need to accurately quantify the amount of uncertainty carried through the modeling process....
This dissertation examines tsunami and hurricane wave loads on bridge superstructures. Tsunamis have caused significant damage to coastal communities in recent years. For example, the 2011 Great East Japan Earthquake and resulting Tohoku Tsunami destroyed infrastructure along the east coast of Japan including bridge superstructures. Recent hurricanes have also caused...
The steel diagrid structural system is a recent load bearing and lateral resisting structural system for tall building structures that is relatively unexplored in the western United States. One possible reason for the little use of diagrid systems in earthquake prone regions is the lack of guidelines and application examples...
Short-term freeway traffic speed prediction is essential to improving mobility and safety. It has been a challenging, yet unresolved issue. Traffic speed prediction can be applied to enhance the intelligent freeway traffic management and control for applications as operational and regulation planning. For example, with more reliable traffic speed prediction,...
The production of high value non-conventional products, such as long utility poles; or the production of low value bulky products, such as chips or grindings; provide opportunities for forest owners to increase value from their forests. The transport of these products requires the use of specialized trucks and trailers. However,...
Deep foundations are necessary for the construction of many structures, such as bridges and buildings, located in areas unsuitable for shallow foundations. Owing to the inherent variability of soil and the complex changes that occur in the soil adjacent to deep foundations as they are installed, the ability to accurately...
Tsunamis have the potential to inflict severe damage and loss of life in coastal communities. Structures known as vertical evacuation buildings provide an alternative evacuation site for communities living in relatively flat, coastal regions with inadequate sources of high ground for evacuation. Design of these structures balances risk and economy,...
Nearly all soils are comprised of mixtures of coarse and fine particles. Behavior under mechanical and thermal loading of soil is strongly influenced (and in some cases, governed) by the ratio of coarse to fine particles. A better understanding of the fundamental behavior of soil mixtures will provide insight to...
Discrete columns, such as stone and soil-cement columns, are often used to improve the liquefaction resistance of loose sandy ground. In particular, stone columns are considered to increase resistance potential by densification, drainage, and reinforcement mechanisms. For silty soil, the shear stress reduction resulting from the reinforcing effect of stiffer...
Concrete formwork is a common type of temporary structure used on construction projects. Due to difficulties in considering actual construction site implications during formwork design, assessments of formwork integrity are often made in the field by site personnel based on subjective visual inspection. The use and re-use of concrete formwork...
The number of international inbound tourists to the United States has risen steadily. To serve these and other tourists best, traffic signs need to communicate information correctly across a potential language barrier. Of particular interest is the traffic sign intended to communicate directions to Tourist Information centers. While the general...
Landslides are a pervasive hazard that can result in substantial damage to properties and loss of life throughout the world. To understand the nature and scope of the hazard, landslide hazard mapping has been an area of intense research by identifying areas most susceptible to landslides in order to mitigate...
Estuaries represent the confluence of land and ocean environments and encompass a number of complex interactions amongst tides, winds, offshore waves and the riverine contributions, all of which contribute to total water levels (TWLs). The study of TWLs and the relative weight of its components can assist local communities in...
Oregon State University conducted a series of laboratory experiments to measure and quantify the near-field wave effects caused within arrays of Wave Energy Converters (WEC). As the waves and WECs interact, the WECs generate radiated waves; these effects vary with the location within the array. Analyzing the near-field waves will...
High Performance Concrete (HPC) is used in our crucial pieces of infrastructure, such as bridge decks, due to its enhanced durability and engineering properties. However, HPC is highly susceptible to early-age cracking. Cracking within the first months of a bridge deck’s lifespan can severely hinder its long-term performance and durability....
The research presented in this thesis assessed the use of high strength steel (HSS) reinforcement for use in reinforced concrete (RC) bridge columns. HSS is not currently allowed in reinforced concrete bridge columns due to a lack of information on the material characteristics and performance information when used in RC...
Most specifications for ready-mix concrete (RMC) limit mixing time to 90 minutes and/or truck drum revolution counts (DRC) to 300 before discharge. These specifications have been in place for many years with the objective of ensuring the quality and performance of the finished concrete product. However, limited research has been...
Large numbers of reinforced concrete deck girder (RCDG) bridges were built during the highway infrastructure boom of the 1950's. The advent of standardized deformed steel reinforcing bars during this time allowed for straight bar terminations in flexural tension regions. Designers of the time terminated reinforcing bars where they were no...
Global climate change is expected to exaggerate the severity of floods and droughts and increase the frequency of extreme streamflow events in the Midwestern United States. Managing these projected impacts poses a major challenge for water resources, conservation, and land use management. Wetlands have been considered as a conservation strategy...
Many older reinforced concrete deck girder (RCDG) bridges contain straight bar terminations of flexural reinforcement. Common bridge design practice of the 1950s did not consider the additional demands on the terminated bars from shear and flexure. Moreover, more stringent code specifications and heavier permit trucks contribute to the insufficient ratings...
During the 2011 Great East Japan Earthquake and Tsunami, numerous bridge structures were damage or destroyed. The damage to bridge systems was caused by long duration strong ground shaking, tsunami inundation forces, or both. Long duration strong ground shaking from subduction zone earthquakes and the multi-hazard scenario of combined earthquake...
Traffic signal countdown timers (TSCT) are innovative, practical and cost effective technologies with the potential to improve efficiency and safety at signalized intersections. The purpose of these devices is to assist motorists in decision making at signalized intersections with real time signal change information. While successful implementation of these devices...
Surf zone eddies (f < 0.01 Hz) are important in nearshore mixing, shoreline erosion, the distribution of pollutants, and ecological processes, such as offshore transport of larvae. Surf zone eddies have traditionally been treated as two-dimensional features with horizontal length scales larger than the local water depth. Studies by Lippmann...