The safety of coastal infrastructure has been a concern after the Indian Ocean Tsunami in 2004 and the Great East Japan Tsunami in 2011. The western coast of the United States is also exposed to tsunami hazards due to the Cascadia subduction zone. Therefore, it is critical to design coastal...
Cross-laminated timber (CLT) is an attractive building material because it is renewable, promotes fast installation, and possesses a high strength-to-weight ratio. The use of CLT in seismic applications has become increasingly common with the development of post-tensioned CLT rocking wall lateral force resisting systems (LFRS). The CLT pier-and-spandrel system designed,...
Roadway departure crashes accounted for 18,275 fatal crashes in 2017 across the United States (Jones et al. 2017). Rumble strips (RS) provide audible and haptic interior alert when a vehicle is departing the roadway reducing run-off-the road crashes. Although inexpensive to install, and easy to maintain, RS are not installed...
Student engagement has been the focus of much engineering education research, in large part due to its ties to student learning. Widely considered to be a meta-construct, student engagement is often broken down into behavioral, emotional, and cognitive components. Reasons for ongoing research on student cognitive engagement are twofold: educators...
The modeling and analysis of laboratory-generated nonlinear intermediate- to deep-water wave fields, using existing wavemaker theories and analysis tools, is one of the most challenging tasks in ocean science and engineering. On one hand, harmonics function (sine and cosine) -based wavemaker theories result in an inherent (linear) instability of the...
The growing contamination of surface water by stormwater runoff parallels increasing urban development. Heavy metals, polycyclic aromatic hydrocarbons (PAHs), persistent organic pollutants (POPs), and contaminants of emerging concern (CECs) are discharged from point sources and washed from impervious surfaces into surface waters, impacting the ecology of these systems, food supplies,...
In 2017, the cost of congestion in the United States was around 305 billion dollars, and city-dwellers, on average, lost 1400 dollars while sitting 42 hours in traffic jams. Aiming for better mobility and more efficient utilization of the transportation network, emerging connected and autonomous vehicle (CAV) technologies and their...
Unlike other industries, overall efficiency of construction projects has been growing minimally which directly causes cost overruns of projects. Though reducing idle time and increasing operational efficiency of construction equipment could result in significant cost saving, there is lack of practical knowledge of adjusting operational efficiency and integrating cost and...
Probabilistic flood hazard assessment is a promising methodology for estuarine risk assessment but currently remains limited by prohibitively long simulation times. This study addresses this problem through the development of an emulator, or surrogate model, which replaces the simulator (in this case the coupled ADCIRC+SWAN model) with a statistical representation...
The goal of the first part of this project was to investigate the influence of aggregate source and entrained air on the transport properties of concrete. Currently, there are several ASTM standards available that provide systematic procedures to evaluate mass transport properties of concrete. ASTM C642-13 (ASTM 2013), often referred...
Landslides are a natural hazard that have major societal, economic, and
environmental impacts. The understanding of landslides begins with the observation that
they are a spatial problem. Spatial relationships have historically been explored with
maps, and landslides are no different. Such maps range in focus from inventory maps,
which identify...
The workshop was funded by the National Science Foundation (NSF), OCE Division of Ocean Sciences (Award # 1817257). This report summarizes the key findings, outcomes, and recommendations of the workshop and serves as a draft of the comprehensive roadmap.
The Large Wave Flume at the O.H. Hinsdale Wave Research Laboratory houses a piston wavemaker with a built-in active absorption system designed by MTS Systems Corporation. The performance of the active absorption system has not been properly assessed yet. This thesis evaluates the performance of the MTS active absorption system...
A series of laboratory experiments were conducted to study the wave field in the inner lagoon excited by ‘long’ incident waves. Three cases were considered: Cases A, B and C presenting incident waves of wavelength with factors of 1, 2 and 2.5 times the width of the reef respectively. The...
Numerical results are presented using a higher-order pseudo-spectral method in order to solve the Zakharov-Craig-Sulem formulation of the Euler model. We study the effects of variable bathymetry on weakly-dispersive, weakly-nonlinear, shallow water waves. Improved predictions on wave amplitude and shoaling behavior are developed by analytical means in the context of...
Bridges are a vital component of transportation infrastructure in the United States, and the continual maintenance and preservation of bridges is critical to maintaining their structural capacity and maximizing service life. One of the most significant issues faced by concrete bridges is the infiltration of moisture from the roadway surface...
There are many aging bridges in service in the US and around the world that were not constructed to modern seismic design codes and standards. As a result, they are expected to perform poorly during intense earthquake ground shaking. Older reinforced concrete (RC) bridges, in particular, are often supported on...
Coastal hazards are the result of numerous physical processes cumulatively causing water levels to flood and erode the land. The waves, storm surges, tides, and run-off contributing to elevated water levels are each the product of chaotic and random weather patterns. These stochastic weather patterns dissipate energy in Earth's climate...
Unmanned aerial systems (UASs), more commonly known as drones, have recently achieved commercial success for many public and private applications. As with all emerging technologies, new safety concerns and conflicts with existing paradigms are likely to arise. Many potential applications of UASs will result in their operation near roadway infrastructure,...
With ever-increasing number of vehicles actively using the state and national roadway network, transportation-related fuel consumption and consequent pavement structural damage rises. In this dissertation, the impact of material-induced dissipated energy mechanisms in asphalt and concrete pavements were analyzed using field measurements in California and finite element modeling of pavement...