This thesis is comprised of two manuscripts based on a laboratory experiment conducted to examine realistic wave forcing on a vertical wall subjected to tsunami loading. The first manuscript examined tsunami force and pressure distributions on a rigid wall that was fronted by a small seawall. Six different seawall heights...
The use of data extracted from particle image velocimetry (PIV) along with vector and tensor visualization techniques provides a valuable tool for understanding a complex flow field. By studying a simple geometric structure such as a cylinder under a simple transient waveform, fundamental mechanisms of wake development under solitary wave...
Originally used as a method to densify loose soils, controlled blasting has expanded its applicability to geotechnical engineering by becoming a research tool to physically generate liquefaction for full-scale in-situ tests, ranging from seismic performance of deep foundations to evaluating ground improvement techniques. Current methods used to design the blasting...
A numerical study on the dynamic response of a generic rigid water-landing object (WLO) during water impact is presented in this paper. The effect of this impact is often prominent in the design phase of the re-entry project to determine the maximum force for material strength determination to ensure structural...
An experimental study of the dynamics of a generic rigid body during water impact and an equivalent-radius approximate analytical procedure is developed and calibrated in this study. The experimental tests in a wave basin covered a range of drop heights using a 1/6th-scale model of a practical water-landing object prototype...
Different specimen preparation methods such as moist tamping, dry funnel deposition, slurry deposition, dry air pluviation have been reported in the literature to investigate the undrained behavior of silty sands. Similarly, different means have been used to densify the soils prepared with such methods. However, the influence of the densification...
Posting advisory speed signs at sharp horizontal curve locations is a common practice in the U.S. These signs recommend drivers safe speeds to negotiate such curves. Literature indicates that adherence to advisory speeds is, in general, poor. Moreover, limited research is available that quantifies safety implications of these signs. This...
This dissertation presents the results of a research effort conducted to better understand the stress-strain, volume change, shear band formation, and strength characteristics of normally consolidated anisotropic clay under fully three-dimensional stress states. A series of consolidated drained true triaxial tests with a constant mean effective stress and constant Lode...
Alkali-silica reaction (ASR) is one of the leading causes of concrete deterioration throughout the world, and affects both structural and non-structural elements. Despite strong research efforts since its discovery by Stanton in the late 1930s, this deteriorating reaction is still not clearly understood nor are proper preventative measures effectively applied...
Infrastructures along the Oregon Coast are vulnerable to seismic events in the Cascadia Subduction Zone that could generate large tsunamis. Bridges along the coast are an important part of the transportation and lifeline system in the area. The major damages on these bridges due to earthquake and/or tsunami would result...