Index Catalog // ScholarsArchive@OSU

Evaluation of bias correction methods for wave modeling output

Creator:: Parker, K. and Hill, D. F.
Abstract:: Models that seek to predict environmental variables invariably demonstrate bias when compared to observations. Bias correction (BC) techniques are common in the climate and hydrological modeling communities, but have seen fewer applications to the field of wave modeling. In particular there has been no investigation as to which BC methodology...
Resource Type:: Article

Static and Wave Equation Analyses and Development of Region-specific Resistance Factors for Driven Piles

Creator:: Bougataya, Youssef
Abstract:: This study uses an existing database of dynamic loading tests of driven piles installed in the Puget Sound Lowlands to improve the reliability of axial performance. First, the unit shaft resistances developed from stress wave signal matching to dynamic records of pile installation are used to develop an effective stress-based...
Resource Type:: Masters Thesis

An Evaluation of the Random-Parameter and Latent Class Methods for Heavy Vehicle Injury Severity and Crash Rate Analysis : An Idaho Case Study by Roadway Classification

Creator:: Anderson, Jason
Abstract:: This thesis provides a comparison of advanced econometric frameworks to account for unobserved factors in crash reported data (also referred to as unobserved heterogeneity) while identifying contributing factors by roadway classification for heavy vehicle injury severity and crash rates. The presented thesis provides two manuscripts that expand the literature regarding...
Resource Type:: Masters Thesis

An Experimental and Numerical Investigation of Tall Mechanically Stabilized Earth Walls

Creator:: Strahler, Andrew W.
Abstract:: The implementation and construction of Mechanically Stabilized Earth (MSE) walls has undergone substantial expansions in recent years, owing to its relatively low cost, ease of construction, and high efficiency compared to conventional retaining methods. As a result, MSE walls are being constructed to greater heights with complex features (e.g. multiple...
Resource Type:: Dissertation

Performance Based Tests on Cross Laminated Timber - Concrete Composite Floor Panels

Creator:: Blank, Curtis
Abstract:: This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
Resource Type:: Masters Thesis

Multi-objective Optimization of Reservoir Operation Under Uncertainty with Robust and Flexible Decision Variables

Creator:: Hosseini, Parnian
Abstract:: Optimization of reservoir operation is involves various competing objectives for a scarce resource (water). To find the optimal operation of reservoirs, it is essential to consider multiple objectives simultaneously. There are various sources of uncertainty associated with the reservoir operation problem that should be considered as well. The overarching goal...
Resource Type:: Dissertation

Multiobjective Optimization of Wetlands for Attaining Flood, Water Quality and Bird Habitat Benefits

Creator:: Noa-Yarasca, Efrain
Abstract:: A significant number of historically existing wetlands that naturally stored rainwater and attenuated flood peaks have now been drained and employed as new farming areas. Beyond the water quality and flow problem, this has resulted in loss of natural habitats of diverse ecological species. Restoring wetlands have hence been proposed...
Resource Type:: Masters Thesis

Accuracy Evaluation of Real-Time GNSS Survey Observations

Creator:: Allahyari, Mahsa
Abstract:: Real time networks (RTNs) have become popular for Global Navigation Satellite System (GNSS) surveys because highly accurate positions can be derived in seconds to minutes compared to hours as required with static sessions. To evaluate the accuracy of these shorter-duration, RTN GNSS observations and their potential for use as a...
Resource Type:: Masters Thesis

Numerical assessment of steel plate shear wall with coupling (SPSW-WC) system design procedure

Creator:: Li, Wennan
Abstract:: The Steel Plate Shear Wall (SPSW) system, is an innovative seismic lateral force resistant system, which has experienced increased use over the last three decades. The SPSW system is composed of boundary elements which anchor web plates that develop diagonal tension fields. A number of SPSW buildings have been built...
Resource Type:: Masters Thesis

Student Engagement : Exploring How and Why Students Engage In- and Out-of-Class

Creator:: Pascoe, Jason J.
Abstract:: Student engagement in a course plays a vital role in a student’s ability to process and construct knowledge. Student engagement research has investigated how students engage in and out of the classroom on a macro scale, through observation and survey data collection of large student populations, which lack focus on...
Resource Type:: Masters Thesis

Unmanned aircraft systems for bridge inspection : testing and developing end-to-end operational workflow

Creator:: Gillins, Matthew N.
Abstract:: Bridge inspections are vital for monitoring the health and serviceability of transportation infrastructure throughout the world. However, inspections can be logistically-challenging, expensive, and dangerous. For example, inspections may require climbing, as well as the use of scaffolding, ladders, rescue boats, bucket trucks, and/or under-bridge inspection vehicles. Small, multirotor unmanned aircraft...
Resource Type:: Masters Thesis

Assimilation of Multi-Sensor Data into Numerical Hydrodynamic Models of Inland Water Bodies

Creator:: Javaheri, Amir
Abstract:: Numerical models are effective tools for simulating complex physical processes such as hydrodynamic and water quality processes in aquatic systems. The accuracy of the model is dependent on multiple model parameters and variables that need to be calibrated and regularly updated to reproduce changing aquatic conditions accurately. Multi-sensor water temperature...
Resource Type:: Dissertation

Wave-by-Wave Forecasting via Assimilation of Marine Radar Data

Creator:: Simpson, Alexandra Joyce
Abstract:: A wave-by-wave forecasting system is desired for optimization of wave energy conversion devices and for improving safety of vessel-based marine operations. This study outlines the first validation attempts of a recently developed forecasting system called Wavecast. The forecasting approach uses X-Band marine radar images for data assimilation, then reconstructs and...
Resource Type:: Masters Thesis

Seismic Performance of Square Reinforced Concrete Columns Retrofitted with Titanium Alloy Bars

Creator:: Lostra, Mackenzie M. W.
Abstract:: Large numbers of reinforced concrete (RC) bridges were built in the past that are now considered seismically deficient. The structural members most likely to be considered deficient are the supporting columns. Typical deficient columns contain inadequate transverse reinforcement and poorly detailed lap splice lengths above the foundation. Insufficient lap splice...
Resource Type:: Masters Thesis

Application of Titanium Alloy Bars for Strengthening Reinforced Concrete Bridge Girders in Flexure

Creator:: Vavra, Eric
Abstract:: Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
Resource Type:: Masters Thesis

Seismic Performance of Aging Prestressed Transmission Pole with Simulated Soil Foundation

Creator:: Argo, Maximo
Abstract:: The Cascadia Subduction Zone has recently been identified as a source for an impending great earthquake. The potential of a large earthquake has created widespread interest into the resiliency of lifelines within the potentially affected areas. One critical lifeline is the electrical distribution and transmission systems which relies on legacy...
Resource Type:: Masters Thesis

A State of Practice of Safety and Big Data in Transportation Engineering Curricula and in Transportation Design : How is it Used and How can Academic Offerings Better Represent Industry Practices?

Creator:: Castro, Edgar D.
Abstract:: Improving safety education could contribute to the preparation of better professional engineers. Safety topics are not holistically embedded in transportation course curricula. This thesis explores the current state in which safety is being incorporated in transportation course curricula in terms of design and compares the uses of safety data in...
Resource Type:: Masters Thesis

Multi-Criteria Risk Mapping Using Lean Tools for the Architecture, Engineering, and Construction Industry

Creator:: Viriato Maia Ferreira Pestana, Ana Catarina
Abstract:: Over the past two decades, the Lean Construction academic and practicing engineering community has used lean practices and tools to help improve the performance of the Architecture, Engineering, and Construction (AEC) industry. Lean practices have led to improved competitiveness of construction companies that have adopted them, by focusing on ways...
Resource Type:: Dissertation

Investigating the Current Teaching Evaluation Practices used in Engineering Programs and their Usefulness to Educators

Creator:: Villanueva, Keisha A.
Abstract:: Evaluation of teaching is used to examine and improve teaching quality in higher education. The literature consists of best teaching evaluation practices that have been developed, yet there is little research that has been conducted which investigates teaching evaluation practices in engineering programs. This thesis represents two manuscripts that explore...
Resource Type:: Masters Thesis

Development of Technologies to Evaluate Hot Mix Asphalt Adhesion through Tack Coat

Creator:: Mahmoud, Aiman Mustafa H.
Abstract:: Flexible pavements consist of multilayers, which form the pavement structures. Since the strength of the bond at interface between layers plays a significant role in improving the structural integri-ty and the performance of pavement structures, tack coat materials and methods used for their application during construction are important in providing...
Resource Type:: Masters Thesis

Evaluation of Oregon Tack Coat Performance to Reduce Tracking and Increase Interlayer Shear Strength of Asphalt Pavements

Creator:: Covey, David J.
Abstract:: CSS-1H is the most commonly used slow-setting emulsion grade in Oregon. “New” engineered emulsions were recently developed in Oregon to reduce tracking, the pick-up of tack coats by construction vehicle tires during construction activities, and increase interlayer shear strength (ISS), the amount of adhesive bond present between layers of asphalt...
Resource Type:: Masters Thesis

Evaluation of seismic response directional combination rules for existing plan irregular reinforced concrete buildings

Creator:: Hussain, Syed Baqir
Abstract:: In this thesis, the effectiveness of the 100 percent + XX percent seismic response directional combination rule available in codes and standards is evaluated using simulated nonlinear seismic response of two existing multi-story reinforced concrete plan-irregular buildings. The 5-story and 8-story buildings were designed according to the 1975 seismic codes...
Resource Type:: Masters Thesis

Bridge Damage State Detection Based on Strain-Based Wireless Structural Health Monitoring

Creator:: Slaven, Kelli R.
Abstract:: The Pacific Northwest is at risk for significant seismic and tsunami events, which are capable of severely damaging lifeline transportation infrastructure, particularly bridges. As the bridges in the United States age and begin to show signs of fatigue, the risk for severe damage increases. Proper monitoring and inspection of bridges...
Resource Type:: Masters Thesis

Shear strengthening reinforced concrete bridge girders using near-surface mounted titanium alloy bars

Creator:: Knudtsen, Jonathan
Abstract:: Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...
Resource Type:: Masters Thesis

Stream Temperature Modeling for Marys River Watershed

Creator:: Mustafa, Mamoon
Abstract:: High water temperatures in rivers have detrimental effects on riverine water quality and ecology. In this study, two river temperature models, within the agricultural watershed model Soil and Water Assessment Tool (SWAT), were investigated for their ability to simulate water temperatures accurately throughout the year. The original temperature model within...
Resource Type:: Masters Thesis

An Experimental Study on Violent Geysers in Vertical Shafts

Creator:: Elayeb, Ibrahem S.
Abstract:: A Geyser in a stormwater (SW) and combined sewer system (CSS) is an oscillatory and violent release of a mixture of air and water through vertical shafts. Violent geysers are highly destructive. In the case of combined sewer systems, many municipalities operate their systems at a fraction of their maximum...
Resource Type:: Masters Thesis

Bridge Model Parameter Sensitivity in Pushover and Nonlinear Time History Analysis

Creator:: Johnsohn, Karryn E.
Abstract:: The aim of this research is to understand and quantify the modeling differences between CSiBridge and OpenSees, and to determine sensitive model parameters. When designing bridges for the high seismic region of California, the California Department of Transportation (Caltrans) performs nonlinear time history analysis of their bridge models. For three-dimensional...
Resource Type:: Masters Thesis

Introducing the Concept of Foundational Attributes and Project Metabolism to Assess Construction Project Similarity

Creator:: Zhang, Fan
Abstract:: A construction project is considered to be unique due to the process of delivering a customer-designed product, diverse stakeholders involved, the unique location and timeframe of construction, and specific social, economic, and environmental constraints attached to it. The uniqueness of construction projects brought great challenges to the construction industry professionals...
Resource Type:: Dissertation

Unsaturated Soils and Foundation Design : Theoretical Considerations for an Effective Stress Framework

Creator:: Baker, Josiah D.
Abstract:: This study presents the theoretical background necessary to model the bearing capacity of shallow and deep foundations in partially saturated soils. The conventional bearing capacity equations for shallow and deep foundations and the 𝛽-method for deep foundation side resistance have been modified to include the effects of matric suction and...
Resource Type:: Masters Thesis

Evaluation of Topography and Seismicity on Shallow Landslide Susceptibility

Creator:: Hess, Daniel M.
Abstract:: Shallow landslides are a prevalent concern in mountainous regions that can result in severe societal, economic, and environmental impacts. The challenge is further compounded as the size and location of a potential slide is often unknown. This study presents a generalized approach for the evaluation of shallow landslide susceptibility using...
Resource Type:: Masters Thesis

Root Cause Analysis of Transportation Infrastructure Accidents Using Fault Trees

Creator:: Yang, Rebecca
Abstract:: The Bureau of Labor Statistics cites construction as the most hazardous industry within the United States. The construction industry was responsible for 20% of all fatal occupational injuries in 2014. Approximately 20% of the construction injuries occur within Heavy Civil Engineering, in which there are 950,000 workers employed annually. This...
Resource Type:: Masters Thesis

The Effects of Construction Practices on Concrete Construction Joint Performance

Creator:: Panduranga Setty, Shreyas
Abstract:: Concrete is the most widely used construction material in the world. When constructing large concrete structures, concrete may have to be placed in multiple lifts. In these cases, fresh concrete is placed on hardened concrete. The interface that is formed between these two lifts of concrete is known as a...
Resource Type:: Masters Thesis

Agent-based Tsunami Evacuation Model : Life Safety and Network Resilience

Creator:: Mostafizi, Alireza
Abstract:: Natural disasters could result in unnecessary loss of life and disproportionate suffering to families and communities if evacuation plans are not in place or understood by the public. In the Pacific Northwest, a magnitude 9.0 earthquake and tsunami from the Cascadia Subduction Zone (CSZ) represents one of the most pressing...
Resource Type:: Masters Thesis

A Comprehensive Mechanistic Study on Using Fine Lightweight Aggregate to Mitigate Alkali-silica Reaction

Creator:: Li, Chang
Abstract:: Previous research has shown that using fine lightweight aggregate (FLWA) can be a promising strategy to mitigate alkali-silica reaction (ASR) in mortar and concrete. While several possible theories were proposed by researchers, discrepancies in testing methods, materials, and supporting evidence still exist. Therefore, this study was initiated. There are two...
Resource Type:: Dissertation

Large–Scale Laboratory Experiment and Numerical Simulation of Tsunami Forces on a Bridge Deck

Creator:: Xiang, Tao
Abstract:: The fluid impact forces on a bridge superstructure in horizontal and vertical directions due to tsunamis represented by solitary waves are investigated through a large-scale laboratory experiment and numerical simulations. The experiment is conducted in a two-dimensional wave basin using a 1:5 scaled reinforced concrete bridge deck model tested under...
Resource Type:: Masters Thesis

Probabilistic Tsunami Hazard and Damage Assessment of the Built Environment : Applied at Seaside, Oregon

Creator:: Park, Hyoungsu
Abstract:: Damage estimates to the built environment from tsunamis are important for disaster mitigation, including planning emergency response and recovery. This dissertation evaluates the damage states of buildings in a small urban coastal city, Seaside, Oregon, from tsunami hazards generated by a Cascadia Subduction Zone (CSZ) event. This study is separated...
Resource Type:: Dissertation

Wheeled Mobility Devices Performance and Passive Securement Systems

Creator:: Mather, Andrea
Abstract:: Wheeled mobility devices (WhMD) pose unique safety risks to users while riding public transportation. Unsecured or improperly secured WhMDs create safety concerns for other transit riders and operators. Tests using accelerometers and visual observations were conducted to understand how WhMD orientation and securement in articulated buses, streetcars, and light rail...
Resource Type:: Masters Thesis

Evaluation of the Performance of Lateral Spread Displacement Empirical Models for Subduction Zone Earthquake Case Histories

Creator:: Bunn, Michael
Abstract:: Lateral spread is a pervasive type of liquefaction-induced ground failure that occurs on gentle slopes or near free-faces, such as river channels. Resulting horizontal displacements can reach up to several meters, and can be considerably damaging to foundations, bridges, roadways, pipelines, etc. In the 1990s, Bartlett and Youd (1992a, 1995)...
Resource Type:: Masters Thesis

Search Constraints

Search Results

Limit your search