The ability of 15 bacterial and fungal isolates to inhibit fungal stain of ponderosa pine sapwood was studied on small wood samples exposed in a moist environment. Several isolates including Bacillus subtilis were capable of inhibiting fungal stain although the protective effect was lost upon prolonged exposure. More detailed evaluations...
The relationship between moisture content and the presence of methylisothiocyanate (MITC) in wood following various applications of sodium n-methyldithiocarbamate (NaMDC) was investigated with small Douglas-fir heartwood blocks. While MITC levels were initially higher in wetter blocks, MITC levels in drier blocks remained more stable over the 8-week test period. The...
Adverse effects on mechanical properties from using a supercritical fluid (SCF) to increase preservative penetration of refractory woods were evaluated by treating small ponderosa pine sapwood specimens with supercritical carbon dioxide at 64 combinations of temperatures (35 to 80 C), pressure (1,000 to 4,000 psig), and time (0.5 to 2...
A new laboratory technique to simulate the initiation of wood decay and to assess the effects of incipient decay on material properties is described. Douglas-fir heartwood specimens were exposed to brown-rot (Postia placenta and Gloeophyllum trabeum) fungi for various periods. Bendlng properties were determined by nondestructive and destructive tests, and...
Impact bending and breaking radius were used to measure loss in toughness caused by basidiomycetes isolated from wood. Small test pieces were used to accelerate testing. Wide differences were found among, and sometimes within, the 26 species tested. Brown-rot fungi tended to cause greater losses than white-rot fungi, but no...
Differences in stain susceptibility were evaluated on sterile and unsterile samples of freshly sawn, frozen and thawed, or oven-dried and rewetted ponderosa pine sapwood. Samples treated with sterile medium or with medium inoculated with either Pseudomonas putida or Bacillus subtilis were inoculated with selected wood-staining fungi. In general, fresh unsterile...
The effect of various wood characteristics on decomposition of metham sodium to methylisothiocyanate in sixteen North American and Southeast Asian hardwoods and softwoods was investigated. While marked differences were noted in the degree of decomposition among some species, the relationship between decomposition and lignin content, extractive levels, wood pH, or...
The effect of pretreatment of Douglas-fir flakes with CCA-C, borate, and azaconazole on properties of flakeboard was studied. Flakes had higher retention levels of CCA-C and borate in their ends than in their centers. The distribution of chemicals was uniform in panels, which indicates that the chemicals did not migrate...
Hyphal fragments and protoplasts of two wood-degrading fungi, Postia placenta and Trametes versicolor, were used to examine the effects of two fungicides, copper sulfate and azaconazole, on fungal health (as measured by oxygen consumption, glucose utilization, potassium levels, cell regeneration, and copper uptake). Although both cell systems responded to the...
Preservative treatment of whole, wood-based composite products (mainly panels) has disadvantages; problems largely stem from swelling, strength loss, and incomplete or inappropriate penetration during treatment, and distortion during redrying. Pretreatment of comminuted wood prior to mat lay-up is one alternative, though the addition of chemicals may affect bonding during subsequent...
To learn the effect of wind on a species native to a windy site, I compared germination, seedling survival, seedling form, and the force required to uproot seedlings in a wind-exposed and a wind-sheltered site. In February 1992, the sand dune perennial Lupinus arboreus Sims. was planted in wind-exposed and...
Tests were conducted to determine the effect of ACZA composition on fixation and the roles of adsorption and precipitation in fixation. The sites of copper and zinc adsorption within the treated wood and the bonding environment of adsorbed copper were also examined. The results generally support the finding that arsenic...
Basamid (3,5-dimethyl-l,3,5,2H-tetrahydrothiadiazine-2-thione), a crystalline powder first used as a soil sterilant, has shown promise as a wood fumigant. This chemical decomposes to methylisothiocyanate (MITC), the primary active ingredient, as well as other products; but the rate of decomposition in wood is too slow to be effective unless certain catalysts are...
The fungitoxicity of carbon disulfide (CS2), methylisothiocyanate (MITC), or a mixture of these two gases, to selected wood-degrading fungi was studied by using a fumigation apparatus. Both gases are important decomposition products of metham sodium, the most commonly used fumigant for internal treatment of large wood members. Carbon disulfide (up...
The effect of supercritical fluid treatment on superficial gas permeability of Douglas-fir was investigated by using carbon dioxide either alone or amended with methanol. Permeability increased in a majority of samples, although nearly one-third of the specimens declined in permeability. Improvements in permeability appeared to be unrelated to variations in...
Flux estimates show that upward mixing of the deep-water nitrate pool accounts for more than 85% of the total new nitrogen input to the euphotic zone of Crater Lake. Because measured primary productivity (360 mg C m-2 d-1) is 10–30 times higher than a level supported solely by the input...
Natural stands and a 3-year-old plantation of red alder (Alnus rubra Bong.) trees were used to study the incidence of leaning stems, the level of growth stresses and tension wood formation, and the ability of the stems to right themselves to vertical. Overall, 10% of the 512 trees in 10...
This paper hypothesizes a correlation in some species between the cambial age of transition from core (juvenile) to outer (mature) wood and the cambial age of transition from photosynthetic to non-photosynthetic bark. Secondly, this paper hypothesizes that the relationship is causal: a signal produced in relation to the photosynthetic bark...
A commercially available, three-dimensional finite-element analysis software was used to model the load-displacement
behavior of metal-plate-connected (MPC) joints in wooden trusses. Model features included consideration
of material properties, teeth-to-grain-to-direction-of-force orientation, wood-to-wood interaction, and gaps between wood
members. To simulate wood-to-plate interaction, the main feature of the model, each tooth of...
Pollen contamination was investigated in one block (block 4) of a 10-block Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) seed orchard complex in western Oregon. Blocks (25 clones each) represent different breeding zones; thus, contaminant pollen sources not only included the adjacent natural stand of Douglas-fir, but also other blocks within the...