It is necessary before placing any piece of apparatus
on the market to thoroughly test it under similar
conditions to that for which it was designed, and to
rate it accordingly to the results of the tests, allow
a reasonable margin for unusual conditions.
By the aid of our technical...
In long distance transmission where it is impossible to transmit a direct current for electric rail roading and for many other applications on a very low voltage percent line loss, it is essential to transmit the power by means of an alternating current at high pressure and then reduce its...
Since this treatise is to deal only with the
construction of one special machine it is unnecessary
to go into an extended discussion of dynamo electric
machinery in general. Some of the parts common to all
electric machinery of this character will be mentioned
and then a short account of...
The following discussion is confined mostly to
that type of machine in which the squirrel care revolving
secondary it used. In its most primitive form it con -
listed simply of a disk- aramature as described by Baily
in 1870 and due to Tesla (1888), of the fact that two,...
Living now in an age where the steam engine in
many localities soon will be a mere relic more than a
useful mechanism with which to convert steam into useful
energy. It is rapidly being replaced by the gas engine
and the electric generator, in which the latter is
thought...
The electric motor has for an number of
years occupied an important position in the operation
of wood-working machinery, of moderate capacity, for
example the planing mills, sash and door factories
and many of the other similar wood working shops.
However its adoption in the more trying field of saw...
Electricity is the name given to an invisible agent known to us only by its attendant phenomena and by various manifestations called electrical. These manifestations, at first obscure and even mysterious, are now well understood. Indeed its great importance to mankind can only be realized when we remember that it...
The proposed hydraulic power plant, incorporated
under the name of, "Minem Light and Power Company",
is located on the Minam River, about two miles above
the junction of the Minam and Wallowa Rivers. This is
about three miles above the county highway bridge which
is on the Wallow River, this...
The study, design, construction, operation and care
or synchronous machines forms one of the most important
branches of electrical engineering. The extent to which
they are now being used is a notable feature of recent
electric progress.
The term synchronous machines covers quite a field
and it might be well...
The financial success or failure of a lighting or power
enterprise is measured by the efficiency of the machinery,
and the efficiency of the machinery depends upon
that of each piece of apparatus of which it is composed.
In alternating current distribution the transformers are
frequently scattered in large numbers...
The data used in the design of this hydro-electric
generating station was furnished by Hon. Walter M. Pierce
from a survey conducted by T. R. Barry C. E. in the service
of the Grande Ronde Water Co. during the summer of
1906.
In the preparation of this thesis there were...
A feasible development for a Hydro-Electric power
plant can be found in the Mary's River. About 9 miles
west of Corvallis, the north fork of the stream affords
an excellent situation for a dam site. The canon of
the north fork at this point is very narrow, and having
good...
By way of preface, a few words may be said regarding the advantages of the revolving field type of machine.
The first in its favor and the chief reason for its
existence, is that by passing the heavy armature current
through permanent stationary contacts and only the small
field current...
It has been a standing problem among the scientists of the past and will perhaps be puzzled-over for many centuries to come; namely the most efficient method of transmitting power from one point to another. The nearest solution at present, and a very satisfactory one, is electricity. By means of...
The problem of the economical transmission of power has long been a serious one to the engineer. Formerly the power had to be generated on or near the spot where it was to be used, but now the advance that has been made in Electrical Engineering has largely done away...
In order that the proper motor for a given service
may be chosen it becomes necessary to study and know
the requirements and characteristics of the machine which
may be used for that purpose. When these are known the
selection of that one which is best adapted for the use...
"Since the present power and heating plant was installed the number of buildings has increased so rapidly
that the present equipment is unable to supply the necessary power for the proposed electrical and mechanical
laboratories.
In this design it is assumed that Waldo and
Cauthorn halls are to be heated...
The rapid advancement of electrical science has led it to invade
the field of marine engineering. On ship-board, all ship's lights,
search lights and signal lights are entirely electric. Of power appliances
outside of uses on men of war,ship's ventilation is completely
electric; electric deck winches and boat cranes are...
One of the most important and likewise practical problems that oonfront
the Electrioal Engineers of the present daysis the design and the
construotion of Hydro Electrio Power plants for the generating of electrioal
energy,both for power and li;hting purposes. In order that we
might become better acquainted with the facts...
A storage battery is a cell. or a series of cells capable of storing up electric energy and giving it off at a required time. A storage battery acts upon the same principle as a galvanic cell in giving forth electric current as the equivalent of chemical energy, but it...
Electromagnetic engines, or motors, are machines in which the motive power is derived from electric currents by means of their electromagnetic action. The following design is for a 1½ K.W. bi-polar motor.