Recent developments in computing technology have generated a demand for more streamlined and effective test systems. By replacing traditional in-chassis wired interconnects with a broadcast wireless system, fault detection and error susceptibility will drastically improve, input/output capabilities will expand, and routing complexity will decrease. Ultra-wideband impulse radio's (UWB-IR) characteristic multipath-immunity...
One of the key challenges in downlink multiuser multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems is the mitigation of the multi-access interference when different users share the same subcarriers. In this work, the block diagonalization (BD) algorithm for inter-user interference pre-cancelation is extended to MIMO-OFDM systems. However, in...
Pulsed ultra-wideband (UWB) radio uses extremely short pulses to transmit information. Such pulses provide very fine timing information, which has led to technological advances in high-precision localization. This thesis investigates UWB localization strategies with a focus on receiver synchronization algorithms for time-difference-of-arrival localization to achieve centimeter accuracies in a 3-dimensional...
Powerline communication (PLC), is becoming a more commonplace method for data transmission, however it is still a very new medium for data transmission, and international standards for powerline communication are still in the process of being developed and established. PLC can provide a means of simplifying the device connectivity to...
Pulsed ultra-wideband (UWB) radio uses extremely short pulses to transmit
information. Such pulses provide very fine timing information, which has led to
technological advances in high-precision localization. This thesis focuses on
techniques and experiments of Time-Difference-of-Arrival (TDOA) localization of
a large number of simultaneous sources. First, common localization techniques
such...
Inter-symbol interference is one of the major factors that make the realization of high-data-rate digital communications system complex. Current designs face two main challenges: how to efficiently utilize the available bandwidth and how to reduce the hardware complexity of the transmitter and receiver. Traditional solutions use a single-band architecture. When...
In modern digital communication systems, error correction codes (ECC) are widely used and play an important role. The main effect of ECCs is to reduce the transmission error caused by channel noise, thereby protecting data and increasing the quality of information transmission. In addition, high spectral efficiency is desired in...
Optical wireless communication (OWC) is an alternative to radio frequency (RF)communication with a signi cantly larger and unregulated spectrum. In OWC systems, optical orthogonal frequency division multiplexing (O-OFDM) with intensity modulation and direct detection (IM/DD) is commonly used. There are two common signal structures in most OWC systems based on...
Threshold-based time of arrival (TOA) estimation is a technique for high-precision indoor localization. Existing threshold selection methods, such as xed thresh- old and normalized threshold methods, do not consider the signal-to-noise radio (SNR) value at the receiver. This is not desired for high-precision positioning. A proper threshold value depends on...
Direct sequence spread spectrum (DSSS) was initially used for anti-jamming in military applications and was later developed in other commercial applications. Walsh codes, which are a set of mutually orthogonal codes, are one type of the spreading codes used in DSSS systems. For any spreading codes of length N, these...