The substrate noise injected by a stepped buffer circuit into two single-ended 1.5GHz low noise amplifiers is examined for a heavily doped 0.25µm CMOS process. The difference in the LNA noise rejection is characterized as a function of the size and placement of substrate contacts. The use of a resistive...
A digital implementation of a PLL has several advantages compared to its
analog counterpart. These include easy scalability with process shrink, elimination
of the noise susceptible analog control for a voltage controlled oscillator (VCO) and
the inherent noise immunity of digital circuits. Several recent digital PLL (DPLL)
implementations have achieved...
Delay insensitive asynchronous circuitry provides significant advantages with
respect to substrate noise due to localized switching. The differences between the
substrate noise from NULL Convention Logic (NCL) and traditional Clocked
Boolean Logic (CBL) are described and analyzed based on measured results. A test chip fabricated in the TSMC 0.25 um...
Efficient methods for simulating the substrate noise generated by complex synchronous and asynchronous digital logic circuits are presented. By simulating digital logic at the gate level, and precharacterizing the gates, the substrate noise generation can be predicted and used in a transistor level simulation of the sensitive analog blocks. This...
In this thesis, the performance degradation of a phase-locked loop due to substrate noise is examined. A new analytical equivalent circuit model for substrate noise coupling is derived for a heavily doped silicon substrate. The model has been validated with measured data from a 0.35 μm CMOS process. Since the...
A fully integrated CMOS GPS receiver RF front end optimized for low power operation is presented. The system operates with a supply voltage down to 250 mV. A prototype has been fabricated in a 0.13μm CMOS process and includes a low voltage LNA, quadrature oscillators, and quadrature mixers. It exhibits...
An ultra low power crystal oscillator that provides a frequency reference for battery
powered timekeeping applications is presented. An amplitude control circuit is employed to ensure that minimum current is consumed. A subthreshold voltage regulator provides a supply voltage for the oscillator with minimum current consumption. The oscillator and regulator...
A fully integrated CMOS latched comparator is presented for use as a wake-up circuit that is attached to an RF energy harvester in a battery free wireless sensor network. The system consumes less than 36nA static current at 20°C and dissipates 2pJ of energy per conversion. The comparator comprises of...
As the demand for real-time information in engineering and health care systems keeps increasing, the need for wireless sensor nodes is also continuously increasing. As a result, the cost and effort involved in installing and maintaining batteries to power the numerous sensor nodes is growing exponentially. Providing a cost effective...
In wireless sensor network applications, low-power operation of the wireless receiver is critical. To address this need an ultra-low power Binary Frequency Shift Keying (BFSK) receiver using the super-regenerative architecture is developed.
A prototype receiver is built and tested for operation in the 900 MHz ISM band. Lab measurements show...