The passive charge compensation (PCC) technique was introduced for switched capacitor (SC) circuit to increase the slew rate and enhance the linearity performance, as PCC techniques are used on the Delta-Sigma modulator (DSM) in ADC circuitry. The PCC technique of the project was applied to the design of a SC...
As screen resolution and video decoding capability have increased, high-definition (HD) video in resolutions as high as 1920 x 1080 is rapidly becoming the standard. Ad-hoc streaming of HD video over 802.11 wireless networks, e.g., streaming from a mobile device to a television, is convenient for users, but is hampered...
This thesis presents a novel algorithmic A/D converter to be used in a biosensor. The converter is capable of a conversion rate of 1.5 bits/phase and hence the required conversion time is reduced. The proposed architecture is analyzed for non-ideal effects and compared with existing algorithmic A/D architectures. The converter...
Ring amplification has emerged as an efficient technique to drive large capacitive loads in switched capacitor circuits. We propose circuit techniques to demonstrate the first application of a ring amplifier in a non-capacitive feedback system of a LDO. These techniques enable a simple cap-less LDO structure in 180nm CMOS that...
The increasing demand for higher data-rates is challenging to satisfy with spectrum-deficient indoor WiFi networks. A novel hybrid WiFi Free-Space Optical (WIFO) system has been proposed to enhance the wireless capacity of indoor WiFi networks. In this thesis, an integrated optical wireless receiver is designed and integrated in 65-nm CMOS...
In cellular telephones, RF power amplifiers consume a significant part of the total phone current. Reducing the average PA current will extend battery life. In GSM systems the handset is commanded by the base station to transmit at power levels lower than full power much of the time. A Doherty...
It is common practice in the unsupervised anomaly detection literature to create experimental benchmarks by sampling from existing supervised learning datasets. We seek to improve this practice by identifying four dimensions important to real-world anomaly detection applications --- point difficulty, clusteredness of anomalies, relevance of features, and relative frequency of...
Farm machinery continues to increase in its importance to the agricultural sector. Depreciation, the decline in value of a durable asset over time, represents one of the largest costs of agricultural production. The general objectives of this study were to update and expand the number of Remaining Value (RV) functions...
An analysis of substrate noise coupling in mixed-signal circuits has been performed in the TSMC 0.25 [mu]m lightly doped and heavily doped CMOS processes. Methods to minimize noise coupling in both the chip design and board design phases are presented along with techniques for accurate circuit simulation of noise coupling....
This thesis presents a low power DC-DC converter suitable for harvesting energy from high impedance thermoelectric generators (TEGs) for the use in body powered electronics. The chip has been fabricated in a 130nm CMOS technology. To meet the power demands of body powered networks, a novel dual-path architecture capable of...