Commonly proposed ocean wave energy converters (OWEC) use inefficient and maintenance demanding intermediate hydraulic and pneumatic systems. We propose a novel rotary direct-drive OWEC that eliminates these intermediate stages. The new device employs a contactless force transmission system (CFTS) comprising a “piston” and a “cylinder” and a ball screw to...
This dissertation presents a dual-path 2-0 MASH (Multi-stAge-noise -SHaping) ADC with two verified digital corrections of DAC mismatch error and quantization noise leakage. By using these two techniques, the requirements for the analog circuits are greatly relaxed. The dual-path structure generates two outputs, one only composed of conversion errors, the...
Digital-to-analog converters (DACs) with wide dynamic range and high
linearity are required for high-end audio applications. A multi-bit delta sigma
audio DAC, using a novel gain-correction technique, is described in this thesis. For
widely varying on-chip RC time constant, the DAC gain can be accurately
controlled by the correction circuitry....
Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are widely used in wireless transceivers. Recently, continuous-time (CT) ΔΣ ADCs gain growing interest in wireless applications for their lower power consumption and wider input bandwidth as compared with the discrete-time (DT) counterparts.
In this thesis, a wideband low-power CT ΔΣ modulator for next generation...
In modern on-chip memories, an increasing demand for higher performance, lower power, reduced area, and improved robustness creates a rising need for advanced microarchitecture and circuit design techniques. Particularly in large-signal multi-ported register files, these advanced design techniques include: (i) multi-banked arrays, (ii) multi-frequency arrays, (iii) multi-bit width gating, (iv)...
Cryptographic devices leak timing and power consumption information that is easily measurable, radiation of various levels, and more. Such devices also have additional inputs, other than plaintext and keys, like voltage, which can be modified to force the device to produce certain faulty outputs that can be used to reveal...
The code reuse problem is a common software engineering problem in scientific computing. As a prevailing programming language in many scientific fields, Fortran does not provide support to address this problem. One particular reason is that Fortran lacks the support for generic programming. By applying program-generation techniques, we developed two...
Designing spectral efficient, high-speed wireless links that offer high quality-
of-service and range capability has been a critical research and engineering challenge. In this thesis, we mainly address the complexity and performance issues of
channel estimation and data detection in multiple-input multiple-output (MIMO)
orthogonal frequency division multiplexing (OFDM) systems over...
Authentication protocols play important roles in network security. A variety of authentication protocols ranging from complex public-key cryptosystems to simple password-based authentication schemes have been proposed. However, currently there is no fully secure authentication scheme that can resist all known attacks. When a user authentication is performed over an insecure...
In recent years, there has been growing interest in both industry and academia to use continuous-time (CT) Δ-Σ A/D converters for wideband wireless and wireline communication applications.
So far no reported CT Δ-Σ A/D modulator achieves 14-bit or higher dynamic range (DR) with more than 2MHz signal bandwidth (equivalently 4MS/s)....
Scaling of CMOS technology has progressed relentlessly for the past several
decades. In order for this unprecedented scaling to benefit the performance of
large digital systems, the communication bandwidth between integrated circuits
(ICs) must scale accordingly. However, interconnect technology does not scale as
aggressively, making communication between chips the major...
With the ever-increasing demand for portable devices used in applications
such as wireless communication, mobile computing, consumer electronics, etc.,
the scaling of the CMOS process to deep submicron dimensions becomes more
important to achieve low-cost, low-power and high-performance digital systems.
However, this downscaling also requires similar shrinking of the supply...
The continued scaling of deep-submicron CMOS technology enables low-voltage high-frequency phase-locked loops (PLLs) to be fully integrated in complex mixed-signal systems. However, fluctuations due to the manufacturing process and variations in
environmental conditions, such as supply voltage and temperature, are also significantly increased. As a result, the performance of PLLs...
Accessing information on the Web has become ingrained into our daily lives, and we seek information from many different sources, including conference and journal publications, personal web pages, and others. Increasingly, web-based information retrieval systems such as web-based search engines, library on-line catalog systems, and subscription-based federated search systems are...
The aim of this dissertation is to develop oxide semiconductors by radio-frequency
sputtering for thin-film transistor (TFT) applications. A variety of oxide semiconductors
are used as the TFT channel layer, including indium gallium oxide (IGO), zinc tin
oxide (ZTO), and indium gallium zinc oxide (IGZO). The variety of materials used...
A digital implementation of a PLL has several advantages compared to its
analog counterpart. These include easy scalability with process shrink, elimination
of the noise susceptible analog control for a voltage controlled oscillator (VCO) and
the inherent noise immunity of digital circuits. Several recent digital PLL (DPLL)
implementations have achieved...
Building intelligent computer assistants has been a long-cherished goal of AI. Many intelligent assistant systems were built and fine-tuned to specific application domains. In this work, we develop a general model of assistance that combines three powerful ideas: decision theory, hierarchical task models and probabilistic relational languages. We use the...
Harvesting energy from the environment for powering micro-power devices have been increasing in popularity. These types of devices can be used in embedded applications or in sensor networks where battery replacement is impractical. In this dissertation, different methods of energy harvesting from the environment are explored as alternative sources of...
Multiple-input multiple-output (MIMO) communication systems have recently been considered as one of the most significant technology breakthroughs for modern wireless communications, due to the higher spectral efficiency and improved link reliability. The sphere decoding algorithm (SDA) has been widely used for maximum likelihood (ML) detection in MIMO systems. It is...
Spreadsheets are among the most widely used end-user programming systems. Unfortunately, there is a high incidence of errors in end-user spreadsheets, and some of these errors have high impact. In this dissertation, we describe techniques we have developed to help end users develop safer spreadsheets. As part of our research,...
Digital-to-analog converters (DACs) suffer from static and dynamic nonlinearity problems, which degrade their accuracy and performance. Mismatch errors in the analog components restrict the maximum achievable linearity.
This thesis presents various techniques for correcting these errors. It describes a correction process for the nonlinear behavior of DACs, on three different...
The main contributions of this thesis are the development and
application of four computationally efficient solutions for
least-squares-based (LS-based) minimum variance spectral estimation
(MVSE). They are: (1) fast computational solution for the 1-D
covariance LS-based MVSE, (2) fast computational solution for the
1-D modified covariance LS-based MVSE, (3) fast computational...
Until recently, research has not considered whether the design of end-user programming environments, such as spreadsheets, multimedia authoring languages, and CAD systems, affects males and females differently. As a result, we began investigating how the two genders are impacted by end-user programming software and whether attention to gender differences is...
An n-bit Gray code is an ordered set of all 2n binary strings of length n. The
special property of this listing is that Hamming distance between consecutive vectors
is exactly 1. If the last and first codeword also have a Hamming distance 1 then the
code is said to...
Ferrites have been used for various high frequency applications as bulk
materials. These applications, however, are limited to large dimension devices. In
this thesis, thin film ferrites were deposited from a low temperature solution-based
deposition process that is suitable for micro-scale high frequency applications. The
low temperature nature of this...
Image feature detection and matching are two critical processes for many computer vision tasks. Currently, intensity-based local interest region detectors and local feature-based matching methods are used widely in computer vision applications. But in some applications, such as biological object recognition tasks, within-class changes in pose, lighting, color, and texture...
Although the digital revolution can realize many of past analog components in the digital forms, our world is surrounded with analog signals such as voice, temperature, etc. The bridge between these two worlds is one of key performance limitations among overall systems and it includes analog filters and data converters....
As the functionality of digital chips continues to increase dramatically, chip- to-chip communication bandwidths must scale accordingly to avoid constraining the overall system performance. Therefore, high speed transceiver design has be- come an important research topic. In particular, the performance of the circuits that are responsible for timing accuracy are...
Low-Density Parity-check (LDPC) codes have attracted considerable attention due to their capacity approaching performance over AWGN channel and highly parallelizable decoding schemes. They have been considered in a variety of industry standards for the next generation communication systems. In general, LDPC codes achieve outstanding performance with large codeword lengths (e.g.,...
The demand for portable electronic systems and the continued
down-scaling of device dimensions resulted in rapid improvement in
the performance of integrated systems. Several low-voltage design
techniques have been proposed to operate analog circuits with sub-1V
supply. However, these techniques require higher power consumption
to achieve large dynamic range while...
With the growing demand for portable/consumer electronics, such as digital
audio/video (AV), the downscaling of device dimensions, which enables the
integration of an increasing number of transistors in a single chip, is mandatory.
This trend also continuously pushes the power supply voltage down to reduce the
power consumption and improve...
The thesis focuses on model-based approximation methods for reinforcement
learning with large scale applications such as combinatorial optimization problems.
First, the thesis proposes two new model-based methods to stablize the
value–function approximation for reinforcement learning. The first one is the
BFBP algorithm, a batch-like reinforcement learning process which iterates between...
Orthogonal frequency division multiplexing (OFDM), which has been very attractive for future high rate wireless communications, is very robust to channel multipath fading effect while providing high transmission data rate with high spectral efficiency.
Multiple antennas can be combined with OFDM to increase diversity gain and to improve spectral efficiency...
Achieving sharpened (enhanced detail) features of a multi-dimensional data source using the linear prediction (LP) bandwidth extrapolation (BWE) technique in the transform domain is the main objective of this research. The evolution of sensor technology has provided acquisition scenarios in which the data format is inherently multi-dimensional, including hyperspectral imaging...
In this thesis, maximum likelihood Doppler frequency estimation and phase noise suppression algorithms for Orthogonal Frequency Division Multiplexing (OFDM) systems are presented. A novel handover decision algorithm for wireless systems, called predictive base station switching (PBSS), is also introduced.
The maximum Doppler Frequency is the ratio of the speed of...
Ultra-wideband (UWB) communication has emerged as a very promising
technology for short-range wireless applications, including
high-speed multimedia transmissions and sensor networks. UWB
system designs involve many different aspects covering analog and
digital processing, channel estimation and modeling, and
modulation and demodulation. Although UWB still faces many
challenges, significant progress has...
Multiple-input multiple-output (MIMO) antenna technology is promising
for high-speed wireless communications without increasing the transmission band-
width. Space time coding (STC) is a scheme that employs multiple antennas to
increase transmission rate or to improve transmission quality. STC is used widely
in mobile cellular networks, wireless local area networks (WLAN)...
The goal of many machine learning problems can be formalized as the creation of a function that can properly classify an input vector, given a set of examples of that function. While this formalism has produced a number of success stories, there are notable situations in which it fails. One...
The integration of renewable energy sources and the associated power electronics to notebook power and thermal management systems was investigated in this work. Both thermoelectric (TE) and photovoltaic (PV) energy extraction techniques were explored with the goal of achieving best sustainability. Semi-realistic usage assumptions were taken into account to evaluate...
Software maintenance accounts for a large portion of the software development cost, particularly the process of updating programs either to adapt for requirement change or to enhance design or efficiency. Currently, program updates are generally performed manually by programmers using text editors. This is an unreliable
method because syntax and...