Natural fibers are gaining popularity as reinforcement materials for thermoset resins over the last two decades. Natural fibers are inexpensive, abundant, renewable and environmentally friendly. Kenaf fibers are one of the natural fibers that can potentially be used for reinforcing unsaturated polyester (UPE). As a polymer matrix, UPE enjoys a...
High performance dielectric materials are needed for high power SiC- or GaN-based electronics which combine the best features of high energy density, low dielectric loss and high reliability and for advanced high-speed and high-voltage energy storage where temperature stability plays an important role in material properties. An ideal capacitor for...
Cellulose nanocrystals (CNCs) are extremely abundant, biodegradable and light weight nanoparticles that have the potential to contribute in many fields including packaging, construction, solar cells and automotive. With the increasing interest in nanotechnology and nanocomposites, CNCs could provide a renewable, optically transparent and strong alternative to other nano-scale reinforcement phases....
The metal-organic–framework MOF-5 is used as an adsorbent in advanced systems for vehicular hydrogen storage that are currently under development. Presently, these systems are limited by poor thermal conductivity of the adsorption bed, and thus our research addresses how the interfaces between grains of MOF-5 can be engineered to improve...
Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America.
CLT products must be certified for structural...
CIGS and CdTe based commercial thin-film solar cells (TFSCs) require an absorber thickness greater than 2 µm and 4 µm, respectively, to adequately absorb the solar spectrum. To efficiently extract photoexcited electrons, these TFSCs require relatively defect-free absorbers with high-minority carrier mobility (> 100 cm2V−1s−1) and long lifetime (> 10...
Oxo-hydroxo Group 5 metal clusters are an untapped resource to study and advance aqueous solution processing of metal oxide thin films. The tetramethylammonium (TMA) hexatantalate salt (TMA6[H2Ta6O19]) yields dense Ta2O5 films (~95% of the bulk ß-Ta2O5 density) with atomically smooth surfaces (<4 Å root mean square surface roughness). This same...
Atomically-thin graphene sheets have unprecedented characteristics for biosensing applications. These characteristics include mechanical flexibility and strength, optical transparency, electrical sensitivity and biocompatibility. The primary theme of this dissertation is the characterization and application of graphene field-effect transistors (FETs) in biologically-relevant physiological environments.Understanding the interface that forms between an electrolyte and...
In Intense Pulsed Light (IPL) sintering, pulsed large-area visible light from a xenon lamp is absorbed by nanoparticle films or patterns and converted to heat, resulting in rapid sintering of the nanoparticles. This work experimentally characterizes IPL sintering of silver nanoparticle films. A newly observed turning point in the evolution...
The ternary system (Bi₀.₅Na₀.₅)TiO₃-(Bi₀.₅K₀.₅)TiO₃-Bi(Mg₀.₅Ti₀.₅)O₃ (BNT-BKT-BMgT) was explored along the [75-(x 2) ]Bi₀.₅Na₀.₅TiO₃ - [25-(x 2)]Bi₀.₅K₀.₅TiO₃ - [x]Bi(Mg₀.₅Ti₀.₅)O₃ composition line. Thin films were fabricated using chelated mixing route solutions spin cast onto platinized silicon substrates. Processing parameters such as: excess cation molar%, solution molality, and crystallization temperatures, for composition where x=0,...