Index Catalog // ScholarsArchive@OSU

Start Over

Filtering by: Academic Affiliation Mechanical, Industrial, and Manufacturing Engineering Decade 2010-2019 Resource Type Masters Thesis Rights Statement In Copyright

Work Overloads Approximation on a Moving Assembly Line Workstation using Markov Chain

Wave Energy Converter Array Optimization : Array Economic Analysis and Preliminary Res...

Vehicle dynamic validation and analysis from suspension forces

Utilizing the thermodynamic properties of E85 to increase the specific efficiency of a...

Utilizing emergent web-based software tools as an effective method for increasing coll...

Using Automation to Understand Sustainable Design Trade-Offs and to Promote Environmen...

Uniform residence time in microreactor-assisted solution deposition of CdS thin-films ...

Turbulent Combustion Analysis of Large Hydrocarbon Fuels in a Reduced Pressure Environ...

Towards a Conceptual Change Model to Support Organizational Change Efforts

Time-domain modeling of heaving point absorber wave energy converters, including power...

Time-Dependent Crack Growth Mechanisms in Alloy 617 at 800°C in Air

Thin Films via Chemical Solution Deposition Synthesis from the (Bi₀.₅Na₀.₅)TiO₃-(Bi₀.₅...

Thermal and Aerodynamic Effects of Surface Roughness Patterns on Additive Manufactured...

Theoretical modeling and experimental analysis of the flight mechanics of Lepidoptera

The wave energy resource of the US Pacific Northwest

The Use of Various Morphologies of Nanocellulose as Life Long Anodes of Sodium Ion Bat...

The impacts of ionization chemistry on hydrocarbon detonation

The impact of shared ownership on virtual team effectiveness

The Global Consumption Speeds of Premixed Large-Hydrocarbon Fuel/Air Turbulent Bunsen ...

The geometric characterization and thermal performance of a microchannel heat exchange...

The experimental characterization of membrane behavior in two-phase gas extraction

The energy extraction performance of an oscillating rigid and flexible foil

The Effect of Process Improvement Practices on Kuwaiti Manufacturing Companies

The effect of acquisition and analysis automation failure in a low-fidelity multitaski...

The dynamic shear moduli of blubber for selected large whale species

The Applicability of Linear Elastic Fracture Mechanics to Compressive Damage of the Ca...

Template-based control of the bipedal robot ATRIAS

Temperature Evolution of Spark Kernels in Quiescent and Cross-flow Conditions

Swept time-space domain decomposition on GPUs and heterogeneous computing systems

Sustainable building design framework : an integrated approach

Sustainability assessment during early product development : the manufacturing case an...

Studying the application of learning and growth metrics in healthcare using analytic h...

Study of the Effects of Chain Whip Length and Bar Length on the Characteristics of Cha...

Stability and Liftoff of Non-premixed Large Hydrocarbon Flames in MILD Conditions

Stability and biological responses of zinc oxide metalworking nanofluids (ZnO MWnF™)

Single- and multi-functional arrayed microchannel fluidic devices

Simulation of drag reduction due to multi-aligned spheres

Shocks and Awe : Damping Selection in Racecars to Maximize Grip

Sequencing using Surrogate Values on Paced Assembly Lines

Sensitivity of Hashin damage parameters for notched composite panels in tension and ou...

Robots Against Infectious Diseases : A Technologically Grounded, Human-Centered Explor...

Robotic Machining Fundamentals for Casting Defect Removal

Robotic deburring

Risk of work-related musculoskeletal disorders among surgeons: comprehensive question ...

Reverse engineering, modeling, and redesign of a vibratory conveyor

REHand: ReEngineering the human hand with differential mechanisms to improve hand func...

Real-Time Estimation and Prediction of Wave Excitation Forces for Wave Energy Control ...

RANS and LES predictions of turbulent scalar transport in dead zones of natural streams

Rank and linear correlation differences in simulation and other applications

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Process-based modeling for cradle-to-gate energy and carbon footprint reduction in pro...

Process modeling the physician-patient encounter

Process Information Modeling for Characterizing Sustainability Performance of Cyclic M...

Predicting deep water breaking wave severity

Practical Application of the Finite Element Method for Vehicle System Loads Analysis

Practical application of steady-state 6-DoF aerodynamic model for vehicle system loads...

Power Cycle Selection and Optimization for a Small Modular Reactor

Potential of Genetic Algorithms for Design of Liquid Cooled Heat Sinks Fabricated Usin...

Planning Under Uncertainty for Unmanned Aerial Vehicles

Photonic Sintering of Nanoparticle Inks : Experimental Characterization, Computational...

Photoinitiated grafting of PMMA onto cellulose nanocrystals to improve nanocomposite r...

Performance of a thermally activated cooling system and design of a microchannel heat ...

Performance Evaluation of Air Shocks Implemented in a Formula Student Vehicle

Performance characterization of an integrated microscale hydrogen combustor recuperato...

Performance and flow stability characteristics in two-phase confined impinging jets

Percent Area Visual Obscuration of F1 Racecar Canopies

Passive pumping in pool and open channel configurations via meso-scale asymmetric surf...

Passive dynamics and their influence on performance of physical interaction tasks

Optimizing ballast design of wave energy converters using evolutionary algorithms

Optimization Across Decomposition : A Multiagent Model of Collaboration in Decomposed ...

Optimal High-bandwidth Non-collocated Control of Ball-screw Drives

Optimal control of an underactuated bipedal robot

Ontologies to Support Repeatable and Valid Customer Requirements Generation

On the Role of Particle Size Distribution in Selective Laser Melting of 316L Stainless...

On the modeling and control of horizontal pendulum wave energy converters

Offshore renewable energy : an exploration of techno-economic feasibility and reliabil...

Numerical simulation of micro/mini-channel based methane-steam reformer

Numerical design of a high-flux microchannel solar receiver

Numerical and Experimental Investigation of Wing Flutter Suppression via Distributed P...

Numerical and Experimental Evaluation of Membrane Based Energy Recovery Ventilator Per...

Numbering-up of parallel microchannel arrays to megawatt scale supercritical CO₂ solar...

Non-Isotropic Fiber Reinforced Elastic Membranes for Micro Aerial Vehicle Wings

Multi-Sensor Data Fusion for Specific Energy Estimation in a Surface Grinding Process

Multi-Scale Study of Ember Production and Transport under Multiple Environmental and F...

Multi-Robot Coordination : Applications in Orchard Bin Management and Informative Path...

Multi Objective Aerodynamic Design in Formula SAE

Modelling Thin Liquid Film Draining of Bubbles on Porous Media in Confined Geometry

Modeling, simulation, and analysis of two hydraulic power take-off systems for wave en...

Modeling Student Engagement in Online Learning Environments Using Real-Time Biometric ...

Modeling innovativeness in consumer products with the influence of environmental susta...

Modeling Implantable Passive Mechanisms for Modifying the Transmission of Forces and M...

Modeling human expertise for providing adaptive levels of robot shared autonomy

Modeling and optimization of a combined cycle Stirling-ORC system and design of an int...

Modeling and analyzing processes with infrequent failures : implications for process m...

Modeling a Spectrum of 3D Printed Materials for Soft Robots

Model Predictive Control for Underwater Robots in Ocean Waves

Microstructural Characterization of Porosity in U-Mo Low Enriched Uranium Plate Fuel

Microchannel steam-methane reforming under constant and variable surface temperature d...

Microchannel extraction of Te⁴⁺ from a stream of CdTe via MIBK in supported liquid mem...

Methodologies to improve reliability engineering in early design