Index Catalog // ScholarsArchive@OSU

Experimental investigation of supercritical heat transfer of carbon dioxide in parallel square microchannels with a single-wall constant heat flux boundary condition

Creator:: Zada, Kyle R.
Abstract:: In the vicinity of the pseudocritical point, supercritical carbon dioxide (sCO₂) undergoes a steep change in properties from “liquid-like” to “gas-like” as it is heated at a constant pressure. At the same time, there is a large spike in specific heat which can yield high heat transfer coefficients and heat...
Resource Type:: Masters Thesis

Heat transport at interface in the metal-organic-frameworks MOF-5

Creator:: Huang, Wenxi
Abstract:: The metal-organic–framework MOF-5 is used as an adsorbent in advanced systems for vehicular hydrogen storage that are currently under development. Presently, these systems are limited by poor thermal conductivity of the adsorption bed, and thus our research addresses how the interfaces between grains of MOF-5 can be engineered to improve...
Resource Type:: Masters Thesis

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Creator:: Zeuthen, Eric D.
Abstract:: The purpose of this study is to measure and compare radiation emissions from flames burning large hydrocarbon fuels to assist in understanding how the molecular composition changes radiation emissions. Radiative heat transfer is significant because it is a primary mode of heat transfer for many combustion devices. This study also...
Resource Type:: Masters Thesis

Single Phase and Flow Boiling Heat Transfer and Flow Characterization in Microscale Pin Fin Heat Sinks

Creator:: Rasouli, Erfan
Abstract:: The ever increasing requirements for heat dissipation in various thermal management applications such as computer chip cooling and high power electronics have necessitated the need for novel thermal management techniques. Thermal management using heat sinks with microscale features is amongst the prominent techniques developed over the past two decades. In...
Resource Type:: Dissertation

Numerical design of a high-flux microchannel solar receiver

Creator:: Rymal, Charles
Abstract:: This thesis discusses the design of several microchannel solar receiver devices for use in CSP (concentrated solar power) using CFD (computational fluid dynamics) simulations. The goal is to demonstrate that, by taking advantage of the higher heat transfer coefficienct of microchannels, solar receivers can achieve higher efficiency than current receiver...
Resource Type:: Masters Thesis

Heat transfer during the piston-cylinder expansion of a gas

Creator:: Rodrigues, Matthew Jose
Abstract:: The expansion of a gas within a piston-cylinder arrangement is studied in order to obtain a better understanding of the heat transfer which occurs during this process. While the situation of heat transfer during the expansion of a gas has received considerable attention, the process is still not very well...
Resource Type:: Masters Thesis

Passive pumping in pool and open channel configurations via meso-scale asymmetric surface patterning

Creator:: Strid, Logan
Abstract:: The research presented in this thesis is a continuation of collaboration between Oregon State University and Auburn University studying the feasibility of passively pumping liquid during boiling in a preferential direction using meso-scaled asymmetric surface patterns. Such a passive phase-change mechanism has great potential for thermal management in spacecraft and...
Resource Type:: Masters Thesis

CFD simulation of single-phase and flow boiling in confined jet impingement with in-situ vapor extraction using two kinds of multiphase models

Creator:: He, Xiaoliang
Abstract:: With continued development of the electronic industry, the demand for highly efficient heat removal solutions requires innovative cooling technologies. A computational fluid dynamic (CFD) study, including heat transfer, is performed for an axisymmetric, confined jet impingement experiencing boiling and coupled with vapor extraction. Boiling occurs at the target surface while...
Resource Type:: Masters Thesis

Local heat transfer rate and bubble dynamics during jet impingement boiling

Creator:: Mani, Preeti
Abstract:: Characterization of local boiling trends, in addition to the typically reported area-averaged trends, is essential for the robust design and implementation of phase change technologies to sensitive heat transfer applications such as electronics cooling. Obtaining the values of heat fluxes corresponding to locally varying surface temperatures has been a challenge...
Resource Type:: Dissertation

Performance and flow stability characteristics in two-phase confined impinging jets

Creator:: Sabo, Michael D.
Abstract:: Advances in electronics fabrication, coupled with the demand for increased computing power, have driven the demand for innovative cooling solutions to dissipate waste heat generated by these devices. To meet future demands, research and development has focused on robust and stable two-phase heat transfer devices. A confined impinging jet is...
Resource Type:: Masters Thesis

Lateral fluid motion in nucleate boiling through asymmetric surface structures

Creator:: Kapsenberg, Florian
Abstract:: This thesis presents a feasibility study of a means to passively effect liquid motion parallel to a heated surface though surface geometrical modifications. Such a passive system is beneficial for electronics cooling applications as it reduces the pumping equipment normally required in flow loops and is desired for space applications,...
Resource Type:: Masters Thesis

ScholarsArchive@OSU

Experimental investigation of supercritical heat transfer of carbon dioxide in parallel square microchannels with a single-wall constant heat flux boundary condition

Heat transport at interface in the metal-organic-frameworks MOF-5

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Single Phase and Flow Boiling Heat Transfer and Flow Characterization in Microscale Pin Fin Heat Sinks

Numerical design of a high-flux microchannel solar receiver

Heat transfer during the piston-cylinder expansion of a gas

Passive pumping in pool and open channel configurations via meso-scale asymmetric surface patterning

CFD simulation of single-phase and flow boiling in confined jet impingement with in-situ vapor extraction using two kinds of multiphase models

Local heat transfer rate and bubble dynamics during jet impingement boiling

Performance and flow stability characteristics in two-phase confined impinging jets

Lateral fluid motion in nucleate boiling through asymmetric surface structures

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search