Index Catalog // ScholarsArchive@OSU

About good work

Creator:: Lee, Wei-Tau
Abstract:: This research is an effort to explore the nature of good work, a concept that describes work that is beneficial to the physical, psychological, and social dimensions of its stakeholders, including and especially the worker. This effort is divided into four distinct parts. First, the construct of good work is...
Resource Type:: Dissertation
Full Text:: Wei-Tau Lee for the degree of Doctor of Philosophy in Industrial Engineering presented on November

Influences of Replacing Cr with Mo in Fe25Co25Ni25Cr25-XMoX High Entropy Alloy Series on the Microstructure and Mechanical Properties

Creator:: Xu, Yifan
Abstract:: Fe25Co25Ni25Cr25-XMoX High Entropy Alloys were fabricated in mini arc-melter and then cast into 4mm diameter cylinders by injection casting technique and 1cm diameter cylinders by water quenching technique. Heat transfer modeling during solidification of FeCoNiCr HEA was simulated. Combining X-Ray Diffraction, Optical Microscopy, Scanning Electron Microscope, Energy Dispersive X-ray analysis,...
Resource Type:: Masters Thesis
Full Text:: science and engineering research since two published papers in 2004 by Jien-Wei Yeh[1] and Brian Cantor

Investigation of Thermal Degradation in Structural Alloys for Nuclear Power Systems

Creator:: Teng, Fei
Abstract:: The thermal degradation of structural materials is considered to be a key factor for evaluating the lifetime of current nuclear power plants. Ni-based and Fe-based alloys, such as 690, 625, 304, and 316, are widely used in nuclear industry as structural components due to the extraordinary corrosion resistance and mechanical...
Resource Type:: Dissertation
Full Text:: . Jia-Hong Ke assisted in paper reviewing and data interpretation of the manuscript. In Chapter 3

Growth, Characterization, and Application of Antimony Sulfide Thin Films via a Novel Microreactor Assisted Nanomaterial Deposition for Solid State Batteries

Creator:: Chun, Bryan H.
Abstract:: The continuous development of higher performing battery materials has emerged in parallel with the development of new manufacturing processes. Nanomaterials are one solution to addressing the cycling and performance challenges that limit existing battery cells. However, many of the methods used today for nanomaterial synthesis are high temperature batch methods...
Resource Type:: Masters Thesis
Full Text:: Sb2S3-Li coin cell prototypes with stable specific capacities of ca. 600 mAh g-1 for over 260 cycles

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Creator:: Yan, Dongqing
Abstract:: A nickel-based Hastelloy C22 powder with a nominal composition of Ni-21.30Cr-13.36Mo-1.92Co-2.94W-3.85Fe-0.23Mn-0.3V(wt%) and particle size distribution of D₁₀=23.8±0.3 μm, D₅₀=37.5±0.2μm, and D₉₀=59.3±1.1 μm was gas atomized to be used as a feedstock in Laser Powder Bed Fusion (LPBF). In this study, laser power and scanning speed were optimized to manufacture specimens...
Resource Type:: Masters Thesis
Full Text:: ] B. Song, X. Zhao, S. Li, C. Han, Q. Wei, S. Wen, J. Liu, Y. Shi, Differences in microstructure and

Mining Temporal Patterns for Prediction: A Mixed-Integer Programming Approach

Creator:: Mansourifard, Farzaneh
Abstract:: In the past two decades, the advancement in data collection and storage have led to the accumulation of complex datasets. Consequently, various industries have sought data-driven solutions to predict and detect anomalies. Temporal patterns have emerged as potential features in prediction models that could improve the performance of the identification...
Resource Type:: Masters Thesis

Tracking of Melt Pool Motion Using Numerical Analysis of Laser Powder Bed Fusion

Creator:: Cox, Bryce
Abstract:: Laser Powder Bed Fusion (LPBF) is a process commonly used to create additively manufactured metal parts. The flexibility and complexity allowed by the LPBF process provides opportunity for significant advancement in multiple industries as parts can be customized in shape and function for specific needs. These benefits can be compounded...
Resource Type:: Dissertation

Manufacturing Process Design and Electrically-Assisted Embossing of a Microchannel Solar Receiver

Creator:: McNeff, Patrick S.
Abstract:: Manufacturing process design (MPD) represents a design-oriented approach to manufacturing engineering. In this dissertation, Haynes 230 (H230), a solid solution-strengthened Ni-based superalloy, was chosen to meet the material requirements of a microchannel solar receiver (MSR) needed to increase the efficiency and reduce the cost of solar thermal power generation. An...
Resource Type:: Dissertation

Multi-objective Resilience Optimization of Interdependent Critical Infrastructure Networks

Creator:: Tiong, Achara
Abstract:: Critical Infrastructures (CIs) such as energy, water supply, telecommunications, and transportation are highly vulnerable to cascading failures due to their interdependent operations. A resilient network is crucial to withstand the impact of functionality loss in disruptive events. This research evaluates network expansion as a proactive resilience strategy in which new...
Resource Type:: Dissertation

Coevolution and transfer learning in a point-to-point fleet coordination problem

Creator:: Yliniemi, Logan Michael
Abstract:: In this work we present a multiagent Fleet Coordination Problem (FCP). In this formulation, agents seek to minimize the fuel consumed to complete all deliveries while maintaining acceptable on-time delivery performance. Individual vehicles must both (i) bid on the rights to deliver a load of goods from origin to destination...
Resource Type:: Masters Thesis

ScholarsArchive@OSU

About good work

Influences of Replacing Cr with Mo in Fe25Co25Ni25Cr25-XMoX High Entropy Alloy Series on the Microstructure and Mechanical Properties

Investigation of Thermal Degradation in Structural Alloys for Nuclear Power Systems

Growth, Characterization, and Application of Antimony Sulfide Thin Films via a Novel Microreactor Assisted Nanomaterial Deposition for Solid State Batteries

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Mining Temporal Patterns for Prediction: A Mixed-Integer Programming Approach

Tracking of Melt Pool Motion Using Numerical Analysis of Laser Powder Bed Fusion

Manufacturing Process Design and Electrically-Assisted Embossing of a Microchannel Solar Receiver

Multi-objective Resilience Optimization of Interdependent Critical Infrastructure Networks

Coevolution and transfer learning in a point-to-point fleet coordination problem

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search