Index Catalog // ScholarsArchive@OSU

Modeling the thermal effects of fabricated fuel-to-cladding gap in fast reactor fuel

Creator:: Baker, Ronald Blair
Abstract:: This report presents a refined method for the calculation of fuel centerline temperatures and the linear-heat-rating-to-incipient melting, ' Q'[subscript m], of mixed-oxide fuel typical of that to be used in the Fast Flux Test Facility and in Liquid Metal Fast Breeder Reactors. Of primary concern are the effects of the...
Resource Type:: Masters Thesis
Full Text:: School Date thesis is presented December 13, 1976 Typed by Robin E. Horton for Ronald B. Baker "By

An analytical model of radiative and convective heat transfer in small and large particle gas fluidized beds

Creator:: Fatani, Abdulhadi Ahmed
Abstract:: A complete analytical model of radiative and convective heat transfer to a horizontal tube in small and large particle gas fluidized beds has been developed. In the model the bed of particles consists of an emulsion phase and a bubble phase. The emulsion phase is approximated by a series of...
Resource Type:: Dissertation
Full Text:: Fluidized Beds Abstract approved: Redacted for privacy Ronald L. Adams A complete analytical model of

A theoretical study of the radiative contribution to heat transfer between a high-temperature, large-particle gas-fluidized bed and an immersed tube

Creator:: Mahbod, Bahram
Abstract:: An analytical model of the radiative contribution to the total heat transfer between a large-particle (greater than 1 mm) gas-fluidized bed and an immersed horizontal tube is discussed. The model is applied to the case of a bubbling bed and the emulsion phase contribution is obtained from a detailed analysis...
Resource Type:: Dissertation
Full Text:: : Redacted for Privacy .---- Ronald L. Adams An analytical model of the radiative contribution to the total

An experimental investigation of radiative and total heat transfer around a horizontal tube immersed in a high temperature gas-solid fluidized bed

Creator:: Alavizadeh, Seyed Nasser
Abstract:: This study is primarily concerned with the measurement of the local radiative component of total heat transfer around a horizontal tube immersed in a large particle fluidized bed at elevated temperatures.Total heat transfer was also measured in order to assess the relative radiation contribution.The radiation measurement probe employs a silicon...
Resource Type:: Dissertation
Full Text:: approved: Redacted for privacy Ronald L. Adams This study is primarily concerned with the measurement of

An experimental and analytical study of the internal fluid dynamics of an ink-jet printhead

Creator:: Elger, D. F.
Resource Type:: Dissertation
Full Text:: Abstract approved: Ronald L. Adams An experimental and analytical study of the internal fluid dynamics

A simplified model of heat transfer between large-particle gas-fluidized beds and immersed surfaces

Creator:: Bakke, Paul D.
Abstract:: A simplified model of the combined particle convective and radiative components of heat transfer between large-particle gas-fluidized beds and immersed surfaces was developed. This analytical model was based on the single particle formulation of Adams and Welty [4,9], with the added assumptions of one-dimensional heat conduction in the particle and...
Resource Type:: Masters Thesis
Full Text:: approved: Redacted for Privacy Ronald L. Adams A simplified model of the combined particle convective

An analytical model of heat transfer to a horizontal cylinder immersed in a gas fluidized bed

Creator:: Adams, Ronald Lynn
Abstract:: A steady gas convection model of heat transfer to a horizontal cylinder immersed in a gas fluidized bed is presented. Contributions due to flow within attached bubbles as well as the interstitial voids are included. The interstitial flow is approximated as flow within a series of double cusped channels and...
Resource Type:: Dissertation
Full Text:: cylinder immersed in a gas fluidized bed AN ABSTRACT OF THE THESIS OF RONALD LYNN ADAMS for the degree

Modeling of geothermal power plants using the binary fluid cycle

Creator:: Walter, Ronald A.
Abstract:: In light of the current world-wide energy situation, the utilization of the immense reserves of geothermal energy is being actively pursued. The thermal energy contained in a geothermal reservoir is mainly stored in rocks, but is also held in liquid water and/or steam. The generation of electrical power from these...
Resource Type:: Masters Thesis
Full Text:: cycle AN ABSTRACT OF THE THESIS OF Ronald A. Walter for the M.S. in Mechanical Engineering (Name

An experimental study on the use of inclusion trapping devices for investment casting

Creator:: Buckingham, Ronald W.
Abstract:: A problem facing the casting industry is inclusions in the finished parts. The inclusions can be sand from the molds, oxides or other impurities in the metal charge. Inclusions lead to costly part repairing or reworking. A study was done to try and find inclusion trapping devices that could be...
Resource Type:: Masters Thesis
Full Text:: devices for investment casting AN ABSTRACT OF THE THESIS OF Ronald W. Buckingham for the degree of

Human gait analysis by gait pattern measurement and forward dynamic model combined with non linear feedback control

Creator:: Ko, Seung-uk
Abstract:: Normal gait of human is believed to be an adapted motor control result of optimal behavior of individual. Normal gait would be altered by aging or injury without being perceived. Subtle changes in gait which is not easy to detect, can cause many serious problems including joint pains and even...
Resource Type:: Dissertation
Full Text:: Control. 3. Greenspan, S. L., Myers, E. R., Kiel, D. P., Parker, R. A., Hayes, W. C., & Resnick, N

ScholarsArchive@OSU

Modeling the thermal effects of fabricated fuel-to-cladding gap in fast reactor fuel

An analytical model of radiative and convective heat transfer in small and large particle gas fluidized beds

A theoretical study of the radiative contribution to heat transfer between a high-temperature, large-particle gas-fluidized bed and an immersed tube

An experimental investigation of radiative and total heat transfer around a horizontal tube immersed in a high temperature gas-solid fluidized bed

An experimental and analytical study of the internal fluid dynamics of an ink-jet printhead

A simplified model of heat transfer between large-particle gas-fluidized beds and immersed surfaces

An analytical model of heat transfer to a horizontal cylinder immersed in a gas fluidized bed

Modeling of geothermal power plants using the binary fluid cycle

An experimental study on the use of inclusion trapping devices for investment casting

Human gait analysis by gait pattern measurement and forward dynamic model combined with non linear feedback control

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search