Supercritical fluid (SCF) impregnation is a promising preservative treatment method, however, the development of SCF processes has been slowed by a limited understanding of the process. Developing a better understanding of the effects of various process parameters on treatment results would allow for a more rational development of SCF impregnation....
The goal of this project was to develop an integrated pest management strategy
for the control of a powder-post beetle (Dinoderus minutus F.). This species causes
serious damage in Philippine bamboo. Developmental threshold and thermal constants
were examined and natural enemies and ftmgi associated with beetles were investigated.
Finally, the...
Presently, the production of wood composites relies on the formaldehyde-based wood adhesives such as phenol-formaldehyde (PF) and urea-formaldehyde (UF). However, their dependence on exhaustible fossil fuels and the emission of carcinogenic formaldehyde prompt to develop an environmentally friendly adhesive from renewable natural resources. This work focuses on development and characterization...
Wood plastic composites (WPCs) are composite materials made from thermoplastic polymers, wood flour, and a small amount of process- and property-enhancing additives; they are principally used in the automotive industry and as secondary building materials. Although the WPC market is expected to keep growing, it is still relatively small when...
The tendency of wood to shrink and swell with changing moisture content remains as one of the most significant challenges to using wood in its many applications. Viscoelastic Thermal Compression (VTC) has been shown to significantly increase the density, strength and stiffness of wood. However, dimensional stability is still a...
The overall goal of this study was to evaluate an alternative to
traditional wood framed shear wall construction. This study introduced the
innovative idea of using a water and seismic damage resistant, wood-concrete-
composite (WCC) construction instead of an all-wood design. The
WCC design consisted of a thin shell of...
The fundamental intent of the study was to develop an innovative wood-strand composite for use in structural applications. Plantation grown, low density, hybrid poplar was used in the study which was found to be appropriate for the underlying Viscoelastic Thermal Compression (VTC) process. Wood modified by this process has high...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
Rapid discoloration and checking of wooden surfaces when exposed outdoors has caused wood to fall out of favor as an outdoor building material, especially in applications where appearance is important. The surface appearance of wood products exposed outdoors can be improved through the application of film forming coatings or by...
The context of this thesis is a research project focused on the investigation of a renewable biopolymer-poly(lactic acid) (PLA) as a potential replacement of petroleum-based polymers in advanced nanocomposites reinforced with Microfibrillated cellulose (MFC). MFC is extracted from wood, which is a renewable, sustainable, carbon neutral and recyclable material. This...
As the forest industry moves toward the use of younger trees and production of an increasing number of composite products improving durability has gained importance. Coatings are one of the most widely used methods for improving wood durability because they improve resistance to water penetration, and subsequent shrinking and swelling,...
Fungi are the primary biological agents of wood deterioration and cause major economic losses of wood products globally. Wood in outdoor applications tends to remain wet for extended time periods, making it susceptible to fungal attack. Understanding the factors involved in fungal colonization of wood is important for developing improved...
Using plant fibers as a potential renewable material to substitute for glass fibers in fiber-reinforced polymer composites has been growing since the late 1990s. Due to high demand, there has been a shift towards ‘green concept’ material in many applications. Numerous secondary plant fibers have been explored as a source...