Sawmills are very complex systems that involve many manufacturing processes. The variability of their raw material adds further to this complexity as each log has characteristics that determine its processing path. Therefore, computer simulation is a very useful technique for analyzing sawmill performance. This thesis describes a simulation computer model...
A sawmill is similar to other manufacturing enterprises when it comes to making decisions, scheduling production and meeting customer demands. In order to help sawmills achieve their goals, and because there is such a high degree of variability in the raw material used in this industry, computer simulation has proven...
The emission of organic compounds from wood manufacturing
facilities is an important regulatory concern due to their effects on ambient
air quality. Control technologies, such as oxidizers and biofiltration, are
used to remove organics from air streams; however, most removal
technologies have high costs or cause additional negative environmental
impact....
The dynamics of radio frequency (RF) laminated veneer lumber (LVL) pressing are explored for the purpose of optimizing this process. The RF LVL press at the Albany Trus Joist plant is the focus of this investigation. The investigation first focuses on bond strength development characteristics of the Georgia Pacific adhesive...
The goal of this study was to optimize a through-boring pattern that will provide adequate preservative penetration while minimizing the reduction in overall pole bending strength. Hole spacing was developed using longitudinal and transverse chemical penetration data from previous studies. Finite element analysis was used as a preliminary assessment tool...
Key parts of the lateral force resisting system in wood-frame buildings
are the shearwafls and the connections. The connections in wooden buildings
are the primary source of ductility and energy dissipation; these are essential
properties when buildings are exposed to lateral forces, such as wind and
earthquakes. Shearwall design is...
The overall goal of this study is to evaluate the earthquake performance of wood frame
shear walls, and more specifically: (1) to compare the performance differences of fully and
partially anchored walls under monotonic, cyclic, and earthquake loads, (2) to compare wall
performance under earthquake loads with that of standardized...
Many paper products like towel and tissue cannot serve their purposes without temporary wet strength Glyoxal-polyacrylamide (GPA) resin is one of the widely used commercial wet strength additives that impart the temporary wet strength to paper and paperboard products However, GPA resin is derived from petrochemicals and contributes to contaminants...
Current compression perpendicular-to-grain (c-perp) design values for wood members are based on mean stress using the ASTM D143 specimen. Base design value, as determined from 0.04-in deformation in the ASTM specimen, is applied to all c-perp applications. While the standard ASTM test was presumably believed to adequately reflect relevant c-perp...
In deciduous species, water exits stems mainly through leaf traces
attached to the outer growth ring and yet we know that water ascends
throughout the entire cross-section of the sapwood. There is an increasing
amount of information on sap flow and sapwood hydraulic properties from
separate studies, but little information...
Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), a shade intolerant species, and western hemlock (Tsuga heterophylla (Raf.) Sarg.), a shade tolerant species, were compared to learn more about the temporal pattern of release from suppression in both species, whether hydraulic architecture or photosynthetic capacity constrain release and how wood functional properties change...