Light-frame construction practices and materials have changed greatly
over the past 100 years. Contemporary research has focused on modern construction; thus, we know a great deal about the behavior of modern lightframe buildings under lateral forces. However, there are many light-frame buildings that were built prior to the introduction of...
New species introductions have been associated with the movement of
people for thousands of years. For instance, horses were introduced into North
America by Spanish explorers, while pigs were introduced by the Polynesians
into many Pacific islands long before the establishment of permanent
European settlements. Both of these species introductions...
The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
There is a continual interest in developing robust, flexible, durable, lightweight, waterborne polymer barrier coatings which are increasingly resistant towards both chemical warfare agents as well as an ever growing number of toxic industrial chemicals. In this study, barrier films were prepared with poly(vinyl alcohol) (PVOH) and varying amounts of...
There has been an increasing realization of the value of innovativeness, the orientation toward innovation, for firms thriving to gain competitive edge. The US forest products industry is no different in this respect and many companies have active initiatives to bring about creativity from their own employees. At the same...
A mathematical and then a numerical model were developed for simulating a convective batch lumber drying process. The model incorporates mass and heat transfer relationships within the lumber stack, as well as thermodynamic properties of the wood and drying air. It takes into account a change of air properties along...
Wood plastic composites (WPCs) are composite materials made from thermoplastic polymers, wood flour, and a small amount of process- and property-enhancing additives; they are principally used in the automotive industry and as secondary building materials. Although the WPC market is expected to keep growing, it is still relatively small when...
Innovativeness, or the propensity of a firm to create and/or adopt new products, process and business systems, has been measured using several methods in previous research. Examples of theses methods include current technology, self-evaluation, research and development funding, the number of new products, and intellectual property. In addition to the...
Co-located mills that share a log resource through a single merchandising
facility are challenged with the task of allocating the costs of joint-products in order to
determine log cost for each mill during a given period. While allocating joint-costs is
inherently arbitrary, some allocation must be made to include raw...
Copper migration from treated wood has created concerns within the
environmental community because of the potential effects of this heavy
metal on aquatic organisms. Migration can be limited, to some extent, by
more controlled treatments and by post-treatment processing, but these
actions cannot completely overcome the problem. An alternative approach...
Due to growing global competition, especially in the last decade, the United States wood and wood-based industries have suffered significant market share losses. The wood industry in Germany is facing similar challenges. To stay competitive in an increasingly global marketplace, many wood manufacturers are adopting new management/manufacturing approaches. Lean manufacturing...
The objective of this research project was to increase the density, strength, and stiffness of two low to medium-density diffuse-porous hardwood species. Wood used in this study was processed using a method of wood densification known as “Viscoelastic Thermal Compression” (VTC). The VTC process is a three phase treatment which...
While the heartwood of many wood species exhibits excellent resistance to fungal and insect attack, this resistance is sometimes diminished in second-growth material of the same species. The reasons for the reduced durability are unclear, but they may reflect a combination of both higher proportions of sapwood as well as...
This presentation is meant to give insight to the saw mill industry where the use of 3- phase AC induction motors in kiln applications expose new and old issues in regards to maintaining machine or kiln uptime. This presentation will cover areas where application and product design have gone through...
Eighteen-hundred grand fir (Abies grandis) studs, curve sawn from small-diameter [approximately 4-7 inches (102-178 mm)] sawlogs, were kiln dried to determine effects
of drying schedule and restraint on energy consumption, drying time, and warp (bow,
crook, and twist). The experimental design included 18 kiln charges with three replications
of three...
Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), a shade intolerant species, and western hemlock (Tsuga heterophylla (Raf.) Sarg.), a shade tolerant species, were compared to learn more about the temporal pattern of release from suppression in both species, whether hydraulic architecture or photosynthetic capacity constrain release and how wood functional properties change...
This study investigated variation in xylem anatomy, hydraulic properties, and the relationship between anatomy and properties within Douglas-fir trees at multiple scales. The hierarchical scales in the study included fertilization treatments (fertilized and unfertilized), trees within the treatments, and positions within the trees. Tracheid diameter, tracheid length, percent latewood, number...
Formaldehyde-based adhesives such as urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives dominate the current wood adhesive market. However, these adhesives are derived from petrochemicals and carcinogenic formaldehyde. In this study, we developed two formaldehyde-free adhesives based on abundant, renewable, and inexpensive soy flour (SF).
The first adhesive was mainly composed of...
In order to operate at peak efficiency, every steam heating coil in a dry kiln must fully
purge the condensate that forms within it. Failure to do so results in a condition known
as waterlogging, where a portion of the coil becomes flooded with condensate.
Waterlogging is recognized as an...