The fundamental intent of the study was to develop an innovative wood-strand composite for use in structural applications. Plantation grown, low density, hybrid poplar was used in the study which was found to be appropriate for the underlying Viscoelastic Thermal Compression (VTC) process. Wood modified by this process has high...
High density polyethylene (HDPE) is a ubiquitous material with versatile properties. It is produced and used in greater volume than any other thermoplastic. HDPE is often filled with a variety of materials for various applications. Glass fiber and wood flour are two common fillers for HDPE. Recently there has been...
The mechanical performance of composite materials is determined by the mechanical properties of their individual components and the effective load transfer between these components. Binders are commonly used to bond composite components together and to provide effective load transfer between them. In wood-based composites the binder-component load transfer occurs at...
Today nano scale materials are being used for wide range of applications. One promising topic in nano scale materials is using them for reinforcement of different polymeric materials to reach desirable stiffness properties. The stiffness of these materials is mostly found experimentally because the nanocomposite community lacks a decent analytical...
Natural fibers are gaining popularity as reinforcement materials for thermoset resins over the last two decades. Natural fibers are inexpensive, abundant, renewable and environmentally friendly. Kenaf fibers are one of the natural fibers that can potentially be used for reinforcing unsaturated polyester (UPE). As a polymer matrix, UPE enjoys a...
Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America.
CLT products must be certified for structural...
Wood-based composites such as plywood and particleboard are produced with a thermoset adhesive via a hot-press process. At present, UF is the most commonly used thermoset adhesive for production of decorative plywood. The emission of the carcinogenic formaldehyde from UF-bonded panels during the use of panels affects the indoor air...
In wood-based composites, the glue-line (interface) between wood-strands affects the stress transfer from one member to the next. The glue-line properties determine the rate of load transfer between phases and these properties depend on wood species, surface preparation, glue properties, glue penetration into wood cells, and moisture content of the...
Wildfire prevention operations like forest thinning and forest fuel removal result in large volumes of woody biomass available for utilization. In 2007 alone, the US federal government spent nearly $2 billion to fight forest fires on federal lands. Annually, the USDA Forest Service spends $1 billion to thin young trees...
Natural fibers such as wood, flax, and hemp are frequently used as fillers in natural fiber-plastic composites (NFPCs). At present, wood fiber is the most commonly used filler in the production of wood-plastic composites (WPCs). The advantages of these fibers compared to conventional inorganic fibers such as glass fiber is...
This thesis consists of three manuscripts related to the methodology of evaluating charring behavior in cross laminated lumber panel specimens subjected to fire performance tests on cross-laminated lumber panel specimens. The topic of the first manuscript is the measurement of char rates of unprotected CLT layups fabricated with ponderosa pine...
There is no doubt that adhesive penetration plays an important role in wood bondline joint performance and durability; yet, to date there is no direct experimental evidence linking penetration depth with bond performance. This is, in part, because adhesive penetration is commonly assessed with various 2D microscopy techniques that are...