Natural dyes have been used to color textiles for centuries, but with the shift to mass production, the use of synthetic dyes has increased due to their lower cost and easy manufacturing volume. However, synthetic dyes (such as disperse blue dyes 106 and 124) have been reported to cause skin...
In investigating wood treatment as a possible processing option for Alaska forest products manufacturers, the double-diffusion method using sodium fluoride followed by a copper sulfate appeared to be the most advantageous approach. Yet, little information was available as to the chemical retention after treating and its resistance to leaching. Green...
Light-frame construction practices and materials have changed greatly
over the past 100 years. Contemporary research has focused on modern construction; thus, we know a great deal about the behavior of modern lightframe buildings under lateral forces. However, there are many light-frame buildings that were built prior to the introduction of...
In deciduous species, water exits stems mainly through leaf traces
attached to the outer growth ring and yet we know that water ascends
throughout the entire cross-section of the sapwood. There is an increasing
amount of information on sap flow and sapwood hydraulic properties from
separate studies, but little information...
Each year the United States: Forest Service (USFS) spends billions of dollars fighting forest fires. One strategy used by the USFS to prevent catastrophic fires is through forest restoration programs, in which potential forest fuel is removed through mechanized thinning. This program is expensive and generates high volumes of small-diameter...
The United States spends about $2 billion each year fighting wildfires. While it is a costly operation, mechanized thinning of dense federal forests is one preventative strategy that generates high volumes of small logs. These small logs are often used for wood chips, pulp, or biomass because of the high...
A sawmill is similar to other manufacturing enterprises when it comes to making decisions, scheduling production and meeting customer demands. In order to help sawmills achieve their goals, and because there is such a high degree of variability in the raw material used in this industry, computer simulation has proven...
In recent years, multiple historic and contemporary timber buildings have been instrumented with sensors to monitor the performance of wood products and novel engineering systems. While literature states the potential of structural health monitoring (SHM) data to inform decision-making process of key stakeholders in the architects, engineers, contractors and manufacturers...
Many nondestructive techniques for structural health monitoring are subjective and based on visual observations of degradation. In addition, dynamic properties of structures are already used to obtain quantitative structural health data. However, most current data collection is limited to localized damage on the structure, rather than global response. Recent research...
Wood-based composites (WBCs) are an important sector of the US economy. For a WBC product to succeed, understanding its long-term durability, including seasonal variations in temperature and humidity, is critical. Durability is especially important WBCs because they are predominantly made from wood, which is a biological, hygroscopic material that is...