Index Catalog // ScholarsArchive@OSU

Usefulness of Structural Health Monitoring for the Wood Construction Industry: Global and Local Perspectives

Creator:: Dilmaghani, Morvarid
Abstract:: In recent years, multiple historic and contemporary timber buildings have been instrumented with sensors to monitor the performance of wood products and novel engineering systems. While literature states the potential of structural health monitoring (SHM) data to inform decision-making process of key stakeholders in the architects, engineers, contractors and manufacturers...
Resource Type:: Masters Thesis
Full Text:: Mariapaola Riggio In recent years, multiple historic and contemporary timber buildings have been

Moisture Monitoring of Cross Laminated Timber Building Components

Creator:: Schmidt, Evan L.
Abstract:: Cross laminated timber (CLT) is a relatively new engineered wood product that has elevated the prospects of utilizing wood as the primary structural material for mid and high rise buildings. The hygrothermal performance of CLT, however, is still not well understood at the material, assembly and building scales. A major...
Resource Type:: Masters Thesis
Full Text:: : ______________________________________________________ Mariapaola Riggio Cross laminated timber (CLT) is a relatively new engineered wood

In-plane Creep Behavior of Cross-laminated Timber and Mass Plywood Panels: A Methodology to Evaluate the Long-term Performance of Post-Tensioned Mass Timber Walls

Creator:: Longman, Ryan P.
Abstract:: Post-tensioned (PT) self-centering shear walls were designed to reduce structural damage from seismic activity. However, these lateral force resistant systems experience post-tension loss negatively affecting the re-centering capability due to delayed deformations experienced by engineered wood products over time. The long-term mechanical response of mass-timber panels to in-plane PT loads...
Resource Type:: Masters Thesis
Full Text:: approved: ____________________________________________________________________ Mariapaola Riggio

Defining Project‐Specific Custom CLT Grade Utilizing Low‐Value Ponderosa Pine Lumber from Logs Harvested in SW Oregon and Northern California Forest Restoration Programs

Creator:: Jahedi, Sina
Abstract:: Restoration programs effectively prevent or mitigate wildfires and pest outbreaks in the forest lands. The most common approach is to selectively harvest smaller and dead trees in order to preserve larger and superior trees. Ponderosa pine, Pinus ponderosa, (PP) lumber is one of the common species harvested from restoration programs...
Resource Type:: Dissertation
Full Text:: gratitude to my advisors, Dr. Lech Muszynski and Dr. Mariapaola Riggio, for their continuous support and

Three Methods for Analyzing Charring Behavior in CLT Panels Exposed to ASTM E119 Standard Fire Test Condition

Creator:: Hong, Seung hyun
Abstract:: This thesis consists of three manuscripts related to the methodology of evaluating charring behavior in cross laminated lumber panel specimens subjected to fire performance tests on cross-laminated lumber panel specimens. The topic of the first manuscript is the measurement of char rates of unprotected CLT layups fabricated with ponderosa pine...
Resource Type:: Masters Thesis
Full Text:: Mariapaola Riggio This thesis consists of three manuscripts related to the methodology of evaluating

Architect Perceptions of Current Trends in Wood Construction : A Survey of the United States West Coast

Creator:: Conroy, Kendall J.
Abstract:: In the last few decades new trends and innovations in wood products have emerged that are changing the way we can use this material in buildings. Additionally, wood is a material that has been touted to have many positive attributes in comparison to nonrenewable construction materials such as steel and...
Resource Type:: Masters Thesis
Full Text:: . Knowles Mariapaola Riggio In the last few decades new trends and innovations in wood

Multi-Scale Dynamic Monitoring and Behavior of Cross-Laminated Timber Elements and Systems

Creator:: Mugabo, Ignace
Abstract:: Cross-Laminated Timber (CLT) is one of the latest engineered wood products to show promising structural features for a variety of structural purposes including resisting lateral loads. For CLT to be widely adopted, its modal behavior needs to be fully evaluated through experimental and numerical methods. It is important to the...
Resource Type:: Dissertation
Full Text:: Mariapaola Riggio Andre R. Barbosa Cross-Laminated Timber (CLT) is one of the latest

A Methodological Approach for Structural Health Monitoring of Mass-Timber Buildings Under Construction

Creator:: Baas, Esther J.
Abstract:: As mass-timber building construction rises around the globe, there exists the need to verify the long-term, in-situ behavior and performance of these structural systems. Structural health monitoring (SHM), generally defined as a damage detection strategy consisting of a network of sensors, a data acquisition system, and algorithms for data analysis,...
Resource Type:: Masters Thesis
Full Text:: . Barbosa Mariapaola Riggio As mass-timber building construction rises around the globe, there

Teacher perceptions of training and pedagogical value of cross-reality and sensor data from smart buildings

Creator:: Rowe, Shawn, Riggio, Mariapaola, De Amicis, Raffaele, and Rowe, Susan R.
Abstract:: This paper discusses elementary, and secondary (K-12) teachers’ perceptions of cross-reality (XR) tools for data visualization and use of sensor data from the built environment in classroom curricula. Our objective was to explore the use of sensor-informed XR in the built environment and civil engineering (BECE) field to support K-12...
Resource Type:: Article
Full Text:: Buildings Shawn Rowe 1 , Mariapaola Riggio 2,*, Raffaele De Amicis 3 and Susan R. Rowe 4 1 College of

Organizational cultural compatibility of engineered wood products manufacturers and building specifiers in the Pacific Northwest

Creator:: Fernando, Balapity Modarage Shanuka R.
Abstract:: Organizations are significantly influenced by corporate cultures of the interacting organizations. Both the construction industry and engineered wood products (EWP) manufacturing industry are generally known for operating in a traditional environment maintaining conservative corporate cultures, which can create friction when they try to interact with a more liberal architectural industry...
Resource Type:: Masters Thesis
Full Text:: out the research. My gratitude also goes to my graduate committee members, Dr. Mariapaola Riggio and

ScholarsArchive@OSU

Usefulness of Structural Health Monitoring for the Wood Construction Industry: Global and Local Perspectives

Moisture Monitoring of Cross Laminated Timber Building Components

In-plane Creep Behavior of Cross-laminated Timber and Mass Plywood Panels: A Methodology to Evaluate the Long-term Performance of Post-Tensioned Mass Timber Walls

Defining Project‐Specific Custom CLT Grade Utilizing Low‐Value Ponderosa Pine Lumber from Logs Harvested in SW Oregon and Northern California Forest Restoration Programs

Three Methods for Analyzing Charring Behavior in CLT Panels Exposed to ASTM E119 Standard Fire Test Condition

Architect Perceptions of Current Trends in Wood Construction : A Survey of the United States West Coast

Multi-Scale Dynamic Monitoring and Behavior of Cross-Laminated Timber Elements and Systems

A Methodological Approach for Structural Health Monitoring of Mass-Timber Buildings Under Construction

Teacher perceptions of training and pedagogical value of cross-reality and sensor data from smart buildings

Organizational cultural compatibility of engineered wood products manufacturers and building specifiers in the Pacific Northwest

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search