Index Catalog // ScholarsArchive@OSU

Cross-Laminated Timber Shear Walls with Toe-Screwed and Slip-Friction Connections

Creator:: Fitzgerald, Dillon M.
Abstract:: Timber engineering is currently in the midst of a significant evolution due to the rise of mass timber products, like cross-laminated timber (CLT). Increasing numbers of structural engineers are facing the challenge of designing lateral-force-resisting systems (LFRS) for multistory CLT structures. LFRS solutions such as steel frames, concrete cores, or...
Resource Type:: Dissertation
Full Text:: applied to CLT shear walls. Studying these connectors has helped to develop some typical CLT wall

Multi-Scale Approach to Evaluating Moisture Durability of Wood-Based Composites

Creator:: Way, Daniel J.
Abstract:: The majority of low-rise residential structures in the U.S. are constructed with wood. Wood-based composites are primary building materials in these structures, used as structural sheathing, joists, and beam components. Wood composites are susceptible to degradation upon exposure to high levels of moisture. Moisture durability is routinely assessed with accelerated...
Resource Type:: Dissertation
Full Text:: to AW prior to shear wall assembly. Finally, a numerical model predicting moisture transport in OSB

Modular Cross Laminated Timber Structures Using Underutilized Ponderosa Pine

Creator:: Bhandari, Sujit
Abstract:: Conflicts and disasters displace millions of populations worldwide. There is a need for rapid and affordable housing to cater to the needs of the displaced and unhoused population. Experience from previous post-disaster responses shows that temporary housing should be rapidly deployable, planned for months to years, and should be environmentally...
Resource Type:: Dissertation
Full Text:: - panel wall had force-displacement behavior similar to a single panel wall for closely spaced screws

Multi-scale Investigation of Adhesive Bond Durability

Creator:: McKinley, Paige Elizabeth
Abstract:: Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
Resource Type:: Masters Thesis
Full Text:: into the cell wall has a positive influence on adhesive bond durability. To fully understand the

Establishing Design Values for Potential Utilization of Western Juniper as a Building Material

Creator:: Miyamoto, Byrne Tadaaki
Abstract:: Western juniper (Juniperus occidentalis) is a conifer that is native to Oregon, California, Washington, Nevada, and Idaho. Juniper is known to have highly decay resistant heartwood and is a popular choice for finished furniture. With recent forest management practices over the past 100 years have resulted in an immense population...
Resource Type:: Masters Thesis
Full Text:: wall structure and distribution of lignin in the cells. Design values for western juniper were

Equipment and kiln design changes based on U.S.F.P.L. research

Creator:: Shaw, Bob, Western Dry Kiln Association, and Western Dry Kiln Association. Meeting (43rd : 1992 : Reno, Nev.)
Resource Type:: Conference Proceeding
Full Text:: Idaho. While there I heard Jeanne Danielson present a talk concerning research the Forest Products Lab

Effective Bonding Parameters for Hybrid Cross-Laminated Timber (CLT)

Creator:: Larkin, Blake
Abstract:: Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America. CLT products must be certified for structural...
Resource Type:: Masters Thesis
Full Text:: orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications

Utilization of Low-value Lumber from Small-diameter Timber Harvested in Pacific Northwest Forest Restoration Programs in Hybrid Cross Laminated Timber (CLT) Core Layers: Technical Feasibility

Creator:: Lawrence, Christina
Abstract:: Each year the United States: Forest Service (USFS) spends billions of dollars fighting forest fires. One strategy used by the USFS to prevent catastrophic fires is through forest restoration programs, in which potential forest fuel is removed through mechanized thinning. This program is expensive and generates high volumes of small-diameter...
Resource Type:: Masters Thesis
Full Text:: Angela Haney who helped me understand more than what is necessary for a project, Jessica King for

Cyclic performance of connections used in hybrid cross-laminated timber

Creator:: Mahdavifar, Vahid
Abstract:: One of the recent additions to the panoply of engineered wood products is cross-laminated timber (CLT). CLT is a prefabricated, large-scale, solid wood panel that consists of multiple layers of lumbers stacked together, with each layer arranged perpendicular to the next layer, glued with structural grade adhesives, and pressed. The...
Resource Type:: Dissertation
Full Text:: doing the testing programs. I want to mention Angela Haney, Jessica King, and Cindy Olson for

Women in Forest Sector Leadership: A Qualitative, Multi-country Study

Creator:: Larasatie, Pipiet
Abstract:: Generally presented as a preferred social norm based on both ethical considerations and legislative demands, gender equality has been highly encouraged in recent years. For instance, The United Nations Sustainable Development Goals for 2030 call out achieving gender equality and empowerment of women. However, although there are multiple efforts to...
Resource Type:: Dissertation
Full Text:: -far away from homeland; Forest Business Solutions Group; Angela Haney and Jessica King in OSU

ScholarsArchive@OSU

Cross-Laminated Timber Shear Walls with Toe-Screwed and Slip-Friction Connections

Multi-Scale Approach to Evaluating Moisture Durability of Wood-Based Composites

Modular Cross Laminated Timber Structures Using Underutilized Ponderosa Pine

Multi-scale Investigation of Adhesive Bond Durability

Establishing Design Values for Potential Utilization of Western Juniper as a Building Material

Equipment and kiln design changes based on U.S.F.P.L. research

Effective Bonding Parameters for Hybrid Cross-Laminated Timber (CLT)

Utilization of Low-value Lumber from Small-diameter Timber Harvested in Pacific Northwest Forest Restoration Programs in Hybrid Cross Laminated Timber (CLT) Core Layers: Technical Feasibility

Cyclic performance of connections used in hybrid cross-laminated timber

Women in Forest Sector Leadership: A Qualitative, Multi-country Study

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search