Index Catalog // ScholarsArchive@OSU

The Modeling of Core-Wide Behavior of Pebble Bed Reactors Using Static and Dynamic Graphite Pebble Properties to Predict Core Performance and Safety Behaviors

Creator:: Cox, Jordan T.
Abstract:: The United States Department of Energy has identified the pebble-bed reactor as a high priority for US research with the end goal of licensing a pebble-bed reactor (PBR) for operation in the United States. Before this can be accomplished significant research must be done regarding the safety of the pebble-bed...
Resource Type:: Dissertation
Full Text:: : _____________________________________________________________________ Brian G. Woods The United States Department of Energy has identified the pebble-bed reactor as

Two-Color Laser Induced Fluorescence Imaging of Fluid Temperature for Free Convection and Vapor Condensation

Creator:: McAfee, Rachel
Abstract:: The development of a continuous and reliable cooling method for computer chips is an evolving subject requiring continuous research in both computer science and thermal management. Two-color laser induced fluorescence (LIF) provides a non-invasive way to investigate electronics cooling fluid behavior. Dielectric fluids are of particular interest as they allow...
Resource Type:: Masters Thesis
Full Text:: Joshua L. Gess The development of a continuous and reliable cooling method for computer chips

Manufacturing Process Design for a Stamped Microchannel High-Temperature Recuperator

Creator:: Song, Chuankai
Abstract:: Microchannel high temperature recuperators have the advantage of higher heat transfer coefficients and lower size and weight than traditional high temperature recuperators. However, the industrial application of microchannel recuperators are restricted by the high cost of photochemical machining and diffusion bonding. The objective of this paper is to introduce a...
Resource Type:: Masters Thesis
Full Text:: approved: ______________________________________________________ Brian K. Paul Microchannel

Development of a Strain Gage Program for the Measurement of Strain on Prototypic, Plate-type, High Performance Research Reactor Fuels under Flow Testing

Creator:: Weiss, Aaron W.
Abstract:: A large, multi-year experimental program has been conducted to develop a strain gaging program for application to the flow testing of prototypic, plate-type fuel for high performance research reactors. This test program has resulted in the selection of appropriate strain gage construction, adhesives, and protective coatings to allow the acquisition...
Resource Type:: Masters Thesis
Full Text:: Abstract approved: Brian G. Woods A large, multi-year experimental program has been conducted to develop

Usage of Digital Image Correlation in Single and Multiple Stereo Systems for Strain and Shape Measurement

Creator:: McKinley, Timothy A.
Abstract:: This dissertation details the application of digital image correlation (DIC) in novel methods for mechanical testing and shape characterization. The first usage manifested in the development of a novel composite test specimen that provided the ability to characterize the matrix compression energy release rate at initiation and subsequent crack propagation....
Resource Type:: Dissertation
Full Text:: Measurement Abstract approved: ______________________________________________________ Brian K

Stability and Liftoff of Non-premixed Large Hydrocarbon Flames in MILD Conditions

Creator:: Walters, Eric M.
Abstract:: The Moderate or Intense Low-oxygen Dilution (MILD) combustion regime has received interest from the industrial furnace and gas turbine engine industries due to attractive properties of reduced NO[subscript x] emissions and high thermal efficiency. MILD combustion is characterized by low oxygen concentrations (i.e. 3%-9% by volume) and high reactant temperatures....
Resource Type:: Masters Thesis
Full Text:: Liftoff of Non-premixed Large Hydrocarbon Flames in MILD Conditions Abstract approved: David L. Blunck

Fluidized Bed Reactor Engines

Creator:: Lavrich, Zoe A.
Abstract:: Repurposing internal combustion engines as petrochemical reactors (i.e., Reactor engines) could offer a smaller, scalable alternative to traditional full scale chemical processing facilities. For many chemical processes, incorporating catalyst particles in fluidized beds is expected to result in superior performance over both monoliths and packed beds. Conversion of ethane into...
Resource Type:: Masters Thesis
Full Text:: : ______________________________________________________ Christopher L. Hagen Repurposing internal combustion engines as petrochemical reactors

Computational modeling of a diffusion bonded microchannel under high pressure and temperature

Creator:: Pratte, William
Abstract:: Diffusion bonded microchannels provide significant benefits by reducing space requirements while improving thermal efficiency when used in heat exchangers. In particular, these microchannels have potential to improve efficiencies for combining concentrated solar power with supercritical CO2 Brayton cycles, where structures operate at high temperatures (760 ˚C) and high pressures (25...
Resource Type:: Masters Thesis
Full Text:: thankful for his support. Thank you also to Dr. Brian Paul and his research group, as well as Dr. Omer

Identifying the Effects of Combustion Products, Turbulent Fluctuations, and Delivered Energy on Ignition Characteristics of Forced Ignition of Jet-A/air Mixtures

Creator:: Teope, Kaz I.
Abstract:: The operation of gas turbine engines depends on the reliable ignition of fuel/air mixtures. Gas turbine engines are commonly used as commercial and military aviation power plants. However, consistent ignition within gas turbine engines is still a problem, especially for more challenging operating conditions such as emergency operations. This work...
Resource Type:: Dissertation
Full Text:: Characteristics of Forced Ignition of Jet-A/air Mixtures Abstract approved: David L. Blunck The operation of

Development of a Rapid Power Transient Critical Heat Flux Model

Creator:: Brown, Emory G.
Abstract:: The understanding of critical heat flux is crucial for the safety of nuclear reactors. To this end, many studies have been carried out to understand various aspects of the boiling crisis phenomenon. Power transient critical heat flux trigger mechanisms is a small category that is relatively under-studied and not well...
Resource Type:: Dissertation
Full Text:: abilities as a young researcher. I would also like to thank my committee members, Dr. Brian Woods, Dr

ScholarsArchive@OSU

The Modeling of Core-Wide Behavior of Pebble Bed Reactors Using Static and Dynamic Graphite Pebble Properties to Predict Core Performance and Safety Behaviors

Two-Color Laser Induced Fluorescence Imaging of Fluid Temperature for Free Convection and Vapor Condensation

Manufacturing Process Design for a Stamped Microchannel High-Temperature Recuperator

Development of a Strain Gage Program for the Measurement of Strain on Prototypic, Plate-type, High Performance Research Reactor Fuels under Flow Testing

Usage of Digital Image Correlation in Single and Multiple Stereo Systems for Strain and Shape Measurement

Stability and Liftoff of Non-premixed Large Hydrocarbon Flames in MILD Conditions

Fluidized Bed Reactor Engines

Computational modeling of a diffusion bonded microchannel under high pressure and temperature

Identifying the Effects of Combustion Products, Turbulent Fluctuations, and Delivered Energy on Ignition Characteristics of Forced Ignition of Jet-A/air Mixtures

Development of a Rapid Power Transient Critical Heat Flux Model

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search