A short-circuit-protected line-driver circuit is
particularly adapted for use in a CMOS differential line-driver
system, where one line-driver circuit provides a
true output signal, and another line-driver circuit
provides a complementary false output signal. A short-circuit
is sensed by measuring current through a secondary
pull-up transistor, and disabling a primary...
It has become customary in electrical engineering to think of
signal processing in terms of voltage variables to the exclusion of
current variables. This tendency has resulted in voltage signal
processing circuits such as voltage-controlled voltage sources
(VCVS) and voltage-mode operational amplifiers. However, the VCVS
operational amplifier has several limitations...
A circuit topology for high-swing, high-linearity
CMOS operational amplifiers has been developed. The
technique uses parallel-connected p- and n-channel
input pairs to realize an input common-mode voltage
range nearly equal to the total power supply voltage.
High linearity is achieved by summing the DC bias and
AC small-signal currents so...
The semiconductor gallium arsenide (GaAs) has many potential
advantages over the more widely used semiconductor silicon (Si).
These include higher low field mobility, semi-insulating substrates,
a direct band-gap, and greater radiation hardness. All these
advantages offer distinct opportunities for implementation of new
circuit functions or extension of the operating conditions...
The chopper-stabilized operational amplifier has good low
frequency noise properties. Unfortunately a simple technique for
simulation of the chopper-stabilized operational amplifier has
not been available.
This thesis describes the implementation of a differential
amplifier using chopper stabilization and its circuit modeling
for the SPICE simulation. This circuit has been designed...
The core area of a conventional CMOS digital gate
array consists of only one size of NMOS device and one
size of PMOS device. Both primitives have fixed minimum
channel lengths, and this has significantly impeded analog
applications. This work has shown that by forming series
and parallel interconnections between...
Nowadays, wireless communication systems use high-order quadrature amplitude modulation (QAM) together with orthogonal frequency-division multiplexing (OFDM) to increase the link capacity and robustness. These signals always have large peak-to-average power ratio (PAPR) and require power amplifiers (PAs) achieve both high efficiency and linearity simultaneously. For the efficiency, the complementary metal...
In recent years, there has been an extensive effort to develop low-cost implementations
of radio frequency integrated circuits for consumer applications. This thesis is a
research effort in the design and implementation of integrated RF CMOS Power Amplifiers
(PAs). A significant challenge in the implementation of RF CMOS ICs is...
Full integration of CMOS low noise amplifiers (LNA) presents a challenge for low
cost CMOS receiver systems. A critical problem faced in the design of an RF CMOS LNA
is the inaccurate high-frequency noise model of the MOSFET implemented in circuit
simulators such as SPICE. Silicon-based monolithic inductors are another...
This thesis will examine the model and design technique of a self-contained analog
CMOS Phase-Locked Loop. This system has an adaptable filter and demodulator for an
oscillating frequency of up to 1000 KHz and it is programmable by means of an external
resistor and capacitor. The first topic to be...