Search Constraints

Start Over
Filtering by: Subject Low voltage systems Remove constraint Subject: Low voltage systems Advisor Fiez, Terri S. Remove constraint Advisor: Fiez, Terri S.

Search Results

  • An ultra low power frequency reference for timekeeping applications

    Creator:
    Oporta, Hector Ivan
    Abstract:
    An ultra low power crystal oscillator that provides a frequency reference for battery powered timekeeping applications is presented. An amplitude control circuit is employed to ensure that minimum current is consumed. A subthreshold voltage regulator provides a supply voltage for the oscillator with minimum current consumption. The oscillator and regulator...
    Resource Type:
    Masters Thesis
    Full Text:
    follows it. This allows a high battery voltage to be used with this system, while still maintaining a low

  • Low power receivers for wireless sensor networks

    Creator:
    Ni, Ronghua
    Abstract:
    Wireless sensor networks are becoming important in several monitoring and sensing applications. Ultra low power consumption in the sensor nodes is important for extending the battery life of the nodes. In this dissertation, two low power BFSK receiver architectures are proposed and verified with prototype implementations in silicion. A 2.4...
    Resource Type:
    Dissertation
    Full Text:
    /super­ regenerative OOK receivers and low-IF/zero-IF BFSK receivers. . . . . 61 4.3 System

  • A DC-DC converter architecture for low-power, high-resistance thermoelectric generators for use in body-powered designs

    Creator:
    Miller, Brian A.
    Abstract:
    This thesis presents a low power DC-DC converter suitable for harvesting energy from high impedance thermoelectric generators (TEGs) for the use in body powered electronics. The chip has been fabricated in a 130nm CMOS technology. To meet the power demands of body powered networks, a novel dual-path architecture capable of...
    Resource Type:
    Masters Thesis
    Full Text:
    loop features a low-power clock and a pulse counting system that is capable of matching the converter

  • An enhanced swing differential Colpitts CMOS VCO for low-voltage operation

    Creator:
    Farahbakhshian, Farhad
    Abstract:
    An enhanced swing differential Colpitts VCO (ESDC-VCO) dramatically improves the swing of a Colpitts VCO by allowing the signal to swing below ground and above the supply voltage. Fabricated in a 1P8M 0.13 um CMOS process, the ESDC-VCO operates at 4.9GHz with a 0.475-V supply and consumes 2.7mW. The measured...
    Resource Type:
    Masters Thesis
    Full Text:
    . Title: An Enhanced Swing Differential Colpitts CMOS VCO for Low-Voltage Operation Abstract approved