A continuous amperometric monitor for aqueous sulfite solutions
has been developed employing the electro-oxidation of sulfur (IV)
in 0. 1 M sulfuric acid at a glassy carbon test electrode. The monitor
employs a hydrodynamic flow cell, in which the solution stream
enters the cell through an orifice impinging on the...
Optimization of the galvanovoltammetric determination of dissolved
chlorine in a flowing stream was achieved through the use of
an analog computational device and improvements in the design of the
galvanovoltammetric cell and accompanying electronic circuitry. An
analysis system, applicable to industrial use over a range of flow
rates and dissolved...
The Kroll Process for the production of zirconium utilizes
the reduction of zirconium tetrachloride with metallic magnesium.
Control of the magnesium content of the final zirconium metal is
essential, as residual magnesium adversely influences the properties
of zirconium.
In this thesis a volumetric method has been presented for the
determination...
An automatic, continuous analyzer has been developed which
is suitable for estimating the level of spent sulfite liquors (SSL) in
laboratory samples. The analyzer makes use of a version of the
Pearl-Benson, or nitroso method, and, in its present form, is
useful for samples whose actual SSL solids concentrations are...
An all-glass gas chromatograph was developed for the analysis
of corrosive metal halides. Included in the apparatus is a new liquid
sampling system designed for fast repetitive sampling of corrosive
liquids in an inert atmosphere. A flame photometer detector was developed
to permit the detection of corrosive solutes in the...
A gas chromatographic procedure was developed for the determination
of nanogram quantities of hydrocyanic acid using a
flame ionization detector. Excellent chromatograms were obtained
on a porous polyaromatic polymer column (Porapak Q) at 60°C. The
procedure was employed for the analysis of HCN in aqueous cyanide
solutions. Solutions as low...
The electrochemistry of the lithium-potassium-sodium
carbonate-borate melt was explored by voltammetry and chrono-amperometry. In support of this, a controlled-potential polarograph
and associated hardware was constructed.
Several different types
of reference electrodes were tried before choosing a porcelain membrane electrode containing a silver wire immersed in a silver sulfate
melt.
The...