Search Constraints

Start Over
Filtering by: Creator Gupta, M. Remove constraint Creator: Gupta, M. Advisor Gupta, Rakesh Remove constraint Advisor: Gupta, Rakesh Degree Field Civil Engineering Remove constraint Degree Field: Civil Engineering

Search Results

  • An Examination of the Neutral Axis of Wood Beams

    Creator:
    Davis, Phillip M.
    Abstract:
    For wood beams, it is often assumed that the neutral axis is located at the centroid of the beam. The neutral axis of isotropic, homogeneous materials is located at the centroid of the material, but wood is neither isotropic nor homogeneous. The varying grain patterns and knots located throughout wood...
    Resource Type:
    Honors College Thesis
    Full Text:
    ABSTRACT OF THE THESIS OF Phillip M. Davis for the degree of Honors Baccalaureate of Science in Civil

  • Behavior of a 1/6th scale, two-story, wood framed residential structure under surge wave loading

    Creator:
    Wilson, Jebediah
    Abstract:
    The goal of this study was to develop an understanding of the nature of surge wave loading on wood framed residential structures for a variety of building configurations and test conditions. The objectives of the study were: (1) to measure forces on a 1/6th scale wood framed residential structure, (2)...
    Resource Type:
    Masters Thesis
    Full Text:
    Structure Under Surge Wave Loading Abstract approved: Rakesh Gupta The goal of

  • Optimizing the performance of gypsum wall board in wood frame shear walls

    Creator:
    Goodall, Scott I.
    Abstract:
    The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
    Resource Type:
    Masters Thesis
    Full Text:
    approved: _____________________________________________________________________ Rakesh Gupta

  • The Location of the Neutral Axis in Wood Beams with Multiple Knots

    Creator:
    Voigt, Levi R.
    Abstract:
    In a homogenous and isotropic material, the location of the neutral axis coincides with the location of the centroid of the beam. Wood is anisotropic, meaning that it has different properties in different directions. It is also non-homogenous, meaning that the beam exhibits different properties at different locations throughout its...
    Resource Type:
    Honors College Thesis
    Full Text:
    . Abstract Approved: ___________________________________________________________ Rakesh Gupta

  • Strain distribution in OSB and GWB in wood frame shear walls

    Creator:
    Sinha, Arijit
    Abstract:
    The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
    Resource Type:
    Masters Thesis
    Full Text:
    Rakesh Gupta The overall goal of this study was to gain an insight

  • Evaluation of system effects and structural load paths in a wood-framed structure

    Creator:
    Martin, Kenneth G.
    Abstract:
    The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
    Resource Type:
    Masters Thesis
    Full Text:
    . Abstract approved: Rakesh Gupta The objective of this project was to

  • Dynamic behavior of metal-plate-connected wood truss joints

    Creator:
    Kent, Scott M.
    Abstract:
    The objectives of this research were to evaluate the behavior of actual metal-plate-connected (MPC) tension-splice and heel wood truss joints under seismic loads from the Northridge earthquake (tension-splice joints only) and under loads from a large artificial earthquake (1.0 g's and 0.67 g's maximum horizontal and vertical accelerations, respectively). A...
    Resource Type:
    Masters Thesis

  • Short-term duration of load and cyclic performance of metal-plate-connected truss joints

    Creator:
    Freilinger, Shawn M. Wicks
    Abstract:
    The objective of this research was to evaluate the duration of load factor for metal-plate-connected (MPC) truss joints subjected to various cyclic loading conditions. Heel and tension-splice joints from a standard 30-foot span Fink truss constructed from nominal 2x4 Douglas-fir lumber were tested. A testing frame similar to that developed...
    Resource Type:
    Masters Thesis

  • Behavior of Cross-Laminated Timber Diaphragm Panel-to-Panel Connections with Self-Tapping Screws

    Creator:
    Sullivan, Kyle
    Abstract:
    The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
    Resource Type:
    Masters Thesis
    Full Text:
    : _____________________________________________________________________ Thomas H. Miller Rakesh Gupta The goal of this project is to contribute to the

  • Evaluation of remediation techniques for circular holes in the webs of wood I-joists

    Creator:
    Polocoser, Tiberiu
    Abstract:
    The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: Rakesh Gupta Thomas H. Miller The objective of this project was