Search Constraints

Start Over
Filtering by: Subject Wooden boxes --Design and construction Remove constraint Subject: Wooden boxes --Design and construction Advisor Gupta, Rakesh Remove constraint Advisor: Gupta, Rakesh

Search Results

  • Slotted-bolted friction damper as a seismic energy dissipator in a braced timber frame

    Creator:
    Tjahyadi, Alfred
    Abstract:
    Friction dampers have been used successfully to dissipate seismic energy in steel and concrete structures. The application is new to timber structures. The objectives of this research were to design a slotted bolted connection (SBC) and evaluate its potential as a passive energy damper in timber brace. The research was...
    Resource Type:
    Masters Thesis
    Full Text:
    Engineering I' Head of Department f Wood Science and Engineering Head of Department of Civil, Construction

  • Evaluation of system effects and structural load paths in a wood-framed structure

    Creator:
    Martin, Kenneth G.
    Abstract:
    The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
    Resource Type:
    Masters Thesis
    Full Text:
    Head of the School of Civil and Construction Engineering Dean of the Graduate School I

  • Light-frame versus timber frame : a study in quantifying the differences

    Creator:
    Malone, Brian P.
    Abstract:
    The objective of this study was to compare light wood framing and traditional timber framing quantitatively through environmental impact assessment and load path analysis. This research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered within reflect the general characteristics...
    Resource Type:
    Masters Thesis
    Full Text:
    traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered

  • Practical modeling for load paths in a realistic, light-frame wood house

    Creator:
    Pfretzschner, Kathryn S.
    Abstract:
    The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
    Resource Type:
    Masters Thesis
    Full Text:
    Acting Head of the School of Civil and Construction Engineering Dean of the Graduate School

  • Strain distribution in OSB and GWB in wood frame shear walls

    Creator:
    Sinha, Arijit
    Abstract:
    The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
    Resource Type:
    Masters Thesis
    Full Text:
    sheathing and gypsum wall board is not incorporated in current design practices. It is recommended that