Search Constraints

Start Over
Filtering by: Creator Gupta, R. Remove constraint Creator: Gupta, R. Advisor Gupta, Rakesh Remove constraint Advisor: Gupta, Rakesh

Search Results

  • The Location of the Neutral Axis in Wood Beams with Multiple Knots

    Creator:
    Voigt, Levi R.
    Abstract:
    In a homogenous and isotropic material, the location of the neutral axis coincides with the location of the centroid of the beam. Wood is anisotropic, meaning that it has different properties in different directions. It is also non-homogenous, meaning that the beam exhibits different properties at different locations throughout its...
    Resource Type:
    Honors College Thesis
    Full Text:
    Thesis of Levi R. Voigt for the degree of Honors Baccalaureate of Science in Civil Engineering

  • Behavior of a 1/6th scale, two-story, wood framed residential structure under surge wave loading

    Creator:
    Wilson, Jebediah
    Abstract:
    The goal of this study was to develop an understanding of the nature of surge wave loading on wood framed residential structures for a variety of building configurations and test conditions. The objectives of the study were: (1) to measure forces on a 1/6th scale wood framed residential structure, (2)...
    Resource Type:
    Masters Thesis
    Full Text:
    Structure Under Surge Wave Loading Abstract approved: Rakesh Gupta The goal of

  • Evaluation of the torsion test as a method to determine the shear strength of structural composite lumber

    Creator:
    Siller, Tobias Stefan
    Abstract:
    Torsion test was evaluated as a method to determine the shear strength parallel to grain of full-size structural composite lumber (SCL). Experimental results of eighty-five rectangular (44 x 140 mm²) specimens were verified by finite element analysis. Laminated strand lumber (LSL), laminated veneer lumber (LVL) and parallel strand lumber (PSL)...
    Resource Type:
    Masters Thesis
    Full Text:
    : Rake h Gupta Torsion test was evaluated as a method to determine the shear strength parallel to grain

  • Evaluation of system effects and structural load paths in a wood-framed structure

    Creator:
    Martin, Kenneth G.
    Abstract:
    The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
    Resource Type:
    Masters Thesis
    Full Text:
    . Abstract approved: Rakesh Gupta The objective of this project was to

  • Optimizing the performance of gypsum wall board in wood frame shear walls

    Creator:
    Goodall, Scott I.
    Abstract:
    The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
    Resource Type:
    Masters Thesis
    Full Text:
    approved: _____________________________________________________________________ Rakesh Gupta

  • An Examination of the Neutral Axis of Wood Beams

    Creator:
    Davis, Phillip M.
    Abstract:
    For wood beams, it is often assumed that the neutral axis is located at the centroid of the beam. The neutral axis of isotropic, homogeneous materials is located at the centroid of the material, but wood is neither isotropic nor homogeneous. The varying grain patterns and knots located throughout wood...
    Resource Type:
    Honors College Thesis
    Full Text:
    . Abstract approved: __________________________________________________________ Rakesh Gupta

  • Strain distribution in OSB and GWB in wood frame shear walls

    Creator:
    Sinha, Arijit
    Abstract:
    The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
    Resource Type:
    Masters Thesis
    Full Text:
    Rakesh Gupta The overall goal of this study was to gain an insight

  • Practical modeling for load paths in a realistic, light-frame wood house

    Creator:
    Pfretzschner, Kathryn S.
    Abstract:
    The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
    Resource Type:
    Masters Thesis
    Full Text:
    Load Paths in a Realistic, Light-Frame Wood House  Abstract approved: Rakesh Gupta Thomas H

  • Monotonic and Cyclic Testing of Cross-Laminated Timber Diaphragms

    Creator:
    Beairsto, Cody J.
    Abstract:
    Mass timber is emerging as a viable form of construction around the world in new markets for wood buildings. The entrance into these markets has driven the demand for more knowledge to enable designs alongside other structural materials such as steel and reinforced concrete. Large, in-plane tests on cross-laminated timber...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Rakesh Gupta Thomas H. Miller Abstract Mass timber is emerging as a viable form of

  • Load Path Investigation in a Light-Frame Wood House with Complex Geometry

    Creator:
    Holman, Justin D.
    Abstract:
    The objective of this study was to investigate load paths in an existing light-frame wood structure with complex geometry, using previously established computer modeling methods. The structural model is derived from an existing, multi-level residence located in Corvallis, Oregon. For the purpose of this study, the existing structure was simplified...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: Rakesh Gupta Thomas H. Miller The objective of this study was to