Index Catalog // ScholarsArchive@OSU

Creator:: Vavra, Eric
Abstract:: Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
Resource Type:: Masters Thesis
Full Text:: : Application of Titanium Alloy Bars for Strengthening Reinforced Concrete Bridge Girders in Flexure

Creator:: Knudtsen, Jonathan
Abstract:: Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...
Resource Type:: Masters Thesis
Full Text:: Strengthening Reinforced Concrete Bridge Girders Using Near-Surface Mounted Titanium Alloy Bars

Creator:: Barker, Laura
Abstract:: Large numbers of reinforced concrete deck girder (RCDG) bridges were built during the highway infrastructure boom of the 1950's. The advent of standardized deformed steel reinforcing bars during this time allowed for straight bar terminations in flexural tension regions. Designers of the time terminated reinforcing bars where they were no...
Resource Type:: Masters Thesis
Full Text:: Moment Regions Using Near-Surface Mounted Retrofitting in Reinforced Concrete Bridge Girders

Creator:: Lee, Ae-young S.
Abstract:: The behavior of stirrups engaged by diagonal cracks and under service loads is largely unknown. Full-size laboratory specimens were loaded to induce diagonal cracks and subjected to high-cycle fatigue loading to represent a service life of 50 years. Tests indicated little change in the average stirrup stress range and mean...
Resource Type:: Masters Thesis

Creator:: Williams, Grahme T.
Abstract:: Fiber reinforced polymers (FRP) are becoming more widely used for repair and strengthening of conventionally reinforced concrete (CRC) bridge members. Once installed, the repair may be exposed to millions of load cycles during service life. The anticipated life of FRP repairs for shear strengthening of bridge members under repeated service...
Resource Type:: Masters Thesis
Full Text:: becoming more widely used for repair and strengthening of conventionally reinforced concrete (CRC) bridge

Creator:: Smith, Matthew T. (Matthew Todd)
Abstract:: Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders. Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
Resource Type:: Masters Thesis
Full Text:: reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and are exhibiting

Creator:: Keller, Philipp
Abstract:: The Astoria-Megler Bridge is a 6.6 kilometer (4.1 mile) long bridge, connecting Oregon and Washington on US 101, with a continuous steel truss main span of 376 m (1232 ft). It is the second longest main span bridge of this type in the world. Due to vortex shedding, some of...
Resource Type:: Masters Thesis
Full Text:: bridge verticals were predicted based on assumed storm duration and recurrence

ScholarsArchive@OSU