Index Catalog // ScholarsArchive@OSU

Scale effects on reinforced concrete beams strengthened for shear with discrete externally bonded carbon fiber-reinforced polymer U-wraps

Creator:: Dawson, Matthew Ryan
Abstract:: Current ACI design provisions for shear in reinforced concrete (RC) beams strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) U-wraps may not adequately account for the effect of scale. This paper describes tests of 6 geometrically scaled beams to identify possible scale effects of such beams. Results indicated that effective...
Resource Type:: Masters Thesis
Full Text:: presented on May 9, 2008. Title: Scale Effects on Reinforced Concrete Beams Strengthened for Shear

Investigation of the fatigue behavior of diagonally-cracked CRC deck-girders repaired with CFRP

Creator:: Williams, Grahme T.
Abstract:: Fiber reinforced polymers (FRP) are becoming more widely used for repair and strengthening of conventionally reinforced concrete (CRC) bridge members. Once installed, the repair may be exposed to millions of load cycles during service life. The anticipated life of FRP repairs for shear strengthening of bridge members under repeated service...
Resource Type:: Masters Thesis
Full Text:: members. Once installed, the repair may be exposed to millions of load cycles during service life. The

New acoustic emission applications in civil engineering

Creator:: Schumacher, Thomas
Abstract:: Non-destructive testing methods and applications have become of increasing interest due to the worldwide aging and deteriorating infrastructure network. In the field of Civil Engineering, bridges and bridge components as well as non-structural elements such as roadway pavements for example, are affected. In particular, the Acoustic Emission (AE) technique offers...
Resource Type:: Dissertation
Full Text:: prediction method called b-value analysis (2). It was found that this analysis method may assist in

Investigation of the behavior of diagonally cracked full-scale CRC deck-girders injected with epoxy resin and subjected to axial tension

Creator:: Smith, Matthew T. (Matthew Todd)
Abstract:: Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders. Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
Resource Type:: Masters Thesis
Full Text:: detailing, increasing service load magnitudes and volume, and temperature or shrinkage strains may

An investigation of Oregon weight-in-motion data for bridge rating implementation and evaluation

Creator:: Pelphrey, Jordan Michael
Abstract:: The LRFR Manual, within commentary Article C6.4.4.2.3, contains provisions for development of site-specific live load factors. In Oregon, truck Weigh-in-Motion (WIM) data were used to develop live load factors for use on state-owned bridges. The factors were calibrated using the same statistical methods that were used in the original development...
Resource Type:: Masters Thesis
Full Text:: . Using GVW as the parameter for establishing live load factors to reflect load effects may not

Influence of diagonal cracks on negative moment flexural anchorage performance in reinforced concrete bridge girders

Creator:: Goodall, Joshua K.
Abstract:: Large numbers of vintage reinforced concrete deck-girder bridges remain in the national bridge inventory. Many of these exhibit diagonal cracking and other distress. Due to the design practices of the time, it is common to observe cracks at locations where flexural reinforcing steel is terminated along the span. The presence...
Resource Type:: Masters Thesis
Full Text:: the flexural steel and some details may be susceptible to anchorage failure. Recent developments in

Shear repair methods for conventionally reinforced concrete girders and deep beams

Creator:: Howell, Daniel A.
Abstract:: Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
Resource Type:: Dissertation
Full Text:: the concrete. The referenced components may exhibit diagonal cracking due to the initial design

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Creator:: Senturk, Ahmet Ekin
Abstract:: Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Resource Type:: Dissertation
Full Text:: may be more sensitive to the effects of bond fatigue

Freeze-thaw durability of reinforced concrete deck girders strengthened for shear with surface-bonded carbon fiber-reinforced polymer

Creator:: Mitchell, Mikal Maxwell
Abstract:: Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...
Resource Type:: Masters Thesis
Full Text:: and shrinkage effects. Load rating of older RCDG bridges, especially for shear, may limit or

Environmental durability of reinforced concrete deck girders strengthened with surface-bonded carbon fiber-reinforced polymer

Creator:: Sopal, Gautam Jayant
Abstract:: Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged environmental exposure and combined...
Resource Type:: Masters Thesis
Full Text:: substrate. The key environmental exposures that may affect CFRP performance for most bridge

ScholarsArchive@OSU

Scale effects on reinforced concrete beams strengthened for shear with discrete externally bonded carbon fiber-reinforced polymer U-wraps

Investigation of the fatigue behavior of diagonally-cracked CRC deck-girders repaired with CFRP

New acoustic emission applications in civil engineering

Investigation of the behavior of diagonally cracked full-scale CRC deck-girders injected with epoxy resin and subjected to axial tension

An investigation of Oregon weight-in-motion data for bridge rating implementation and evaluation

Influence of diagonal cracks on negative moment flexural anchorage performance in reinforced concrete bridge girders

Shear repair methods for conventionally reinforced concrete girders and deep beams

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Freeze-thaw durability of reinforced concrete deck girders strengthened for shear with surface-bonded carbon fiber-reinforced polymer

Environmental durability of reinforced concrete deck girders strengthened with surface-bonded carbon fiber-reinforced polymer

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search