Index Catalog // ScholarsArchive@OSU

Investigation of the fatigue behavior of diagonally-cracked CRC deck-girders repaired with CFRP

Creator:: Williams, Grahme T.
Abstract:: Fiber reinforced polymers (FRP) are becoming more widely used for repair and strengthening of conventionally reinforced concrete (CRC) bridge members. Once installed, the repair may be exposed to millions of load cycles during service life. The anticipated life of FRP repairs for shear strengthening of bridge members under repeated service...
Resource Type:: Masters Thesis
Full Text:: Potisuk, Mr. Richard Forrest, Mr. Thomas Schumacher, Ms. Michelle Chavez, and Ms. Angela Rogge for their

Investigation of the behavior of diagonally cracked full-scale CRC deck-girders injected with epoxy resin and subjected to axial tension

Creator:: Smith, Matthew T. (Matthew Todd)
Abstract:: Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders. Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
Resource Type:: Masters Thesis
Full Text:: . K., Nicholas, B. S., Robelo, M. J., Lee, A-Y., and Forrest, R. W., “Research Project SPR 350 SR

New acoustic emission applications in civil engineering

Creator:: Schumacher, Thomas
Abstract:: Non-destructive testing methods and applications have become of increasing interest due to the worldwide aging and deteriorating infrastructure network. In the field of Civil Engineering, bridges and bridge components as well as non-structural elements such as roadway pavements for example, are affected. In particular, the Acoustic Emission (AE) technique offers...
Resource Type:: Dissertation
Full Text:: , M. C., Main, I. G., and Halliday, J. (2003a). "AE monitoring of concrete bridge beams in situ

Analysis of conventionally reinforced concrete deck girder bridges for shear

Creator:: Potisuk, Tanarat
Abstract:: Large numbers of 1950's vintage conventionally reinforced concrete (CRC) bridges remain in-service in the national bridge inventory. Many of these bridges are lightly reinforced for shear. Evaluation of these bridges to prevent unnecessary and costly repairs requires refined analytical techniques. This dissertation presents finite element (FE) modeling and comparisons of...
Resource Type:: Dissertation
Full Text:: than top bars - All deformed compression bars Reinforcement: 'ear (edition) 1941(3) J 1944(4m) I

Shear strengthening reinforced concrete bridge girders using near-surface mounted titanium alloy bars

Creator:: Knudtsen, Jonathan
Abstract:: Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...
Resource Type:: Masters Thesis

An investigation of Oregon weight-in-motion data for bridge rating implementation and evaluation

Creator:: Pelphrey, Jordan Michael
Abstract:: The LRFR Manual, within commentary Article C6.4.4.2.3, contains provisions for development of site-specific live load factors. In Oregon, truck Weigh-in-Motion (WIM) data were used to develop live load factors for use on state-owned bridges. The factors were calibrated using the same statistical methods that were used in the original development...
Resource Type:: Masters Thesis
Full Text:: for legal loads as: or for permit loads as: R1 = W + tADTT3S2 [3a] RT = J) + tADTT along [3b

Testing and evaluation of flexural reinforcing bars terminating in columns

Creator:: Koester, Carl C.
Abstract:: Capacity of transverse 1950's vintage reinforced concrete deck girder bridge bent caps with large straight bar anchorages were investigated and evaluated. Eleven subassemblage column specimens were examined with different anchorage lengths, bar groupings, amount of transverse steel, and externally applied axial force. Test results showed an increase in anchorage capacity...
Resource Type:: Masters Thesis

Application of Titanium Alloy Bars for Strengthening Reinforced Concrete Bridge Girders in Flexure

Creator:: Vavra, Eric
Abstract:: Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
Resource Type:: Masters Thesis

Freeze-thaw durability of reinforced concrete deck girders strengthened for shear with surface-bonded carbon fiber-reinforced polymer

Creator:: Mitchell, Mikal Maxwell
Abstract:: Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...
Resource Type:: Masters Thesis
Full Text:: , Thomas Schumacher, A. Ekin Senturk, Matthew Smith, Gautam J. Sopal and O. Tugrul Turan. This

Environmental durability of reinforced concrete deck girders strengthened with surface-bonded carbon fiber-reinforced polymer

Creator:: Sopal, Gautam Jayant
Abstract:: Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged environmental exposure and combined...
Resource Type:: Masters Thesis

Scale effects on reinforced concrete beams strengthened for shear with discrete externally bonded carbon fiber-reinforced polymer U-wraps

Creator:: Dawson, Matthew Ryan
Abstract:: Current ACI design provisions for shear in reinforced concrete (RC) beams strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) U-wraps may not adequately account for the effect of scale. This paper describes tests of 6 geometrically scaled beams to identify possible scale effects of such beams. Results indicated that effective...
Resource Type:: Masters Thesis
Full Text:: . Mitchell, Thomas Schumacher, A. Ekin Senturk, Matthew Smith, Gautam J. Sopal and O. Tugrul Turan

Influence of diagonal cracks on negative moment flexural anchorage performance in reinforced concrete bridge girders

Creator:: Goodall, Joshua K.
Abstract:: Large numbers of vintage reinforced concrete deck-girder bridges remain in the national bridge inventory. Many of these exhibit diagonal cracking and other distress. Due to the design practices of the time, it is common to observe cracks at locations where flexural reinforcing steel is terminated along the span. The presence...
Resource Type:: Masters Thesis
Full Text:: .......................................................................................... 137 Appendix J: Specimen IT.60.Ld2

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Creator:: Senturk, Ahmet Ekin
Abstract:: Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Resource Type:: Dissertation

Shear repair methods for conventionally reinforced concrete girders and deep beams

Creator:: Howell, Daniel A.
Abstract:: Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
Resource Type:: Dissertation

ScholarsArchive@OSU

Investigation of the fatigue behavior of diagonally-cracked CRC deck-girders repaired with CFRP

Investigation of the behavior of diagonally cracked full-scale CRC deck-girders injected with epoxy resin and subjected to axial tension

New acoustic emission applications in civil engineering

Analysis of conventionally reinforced concrete deck girder bridges for shear

Shear strengthening reinforced concrete bridge girders using near-surface mounted titanium alloy bars

An investigation of Oregon weight-in-motion data for bridge rating implementation and evaluation

Testing and evaluation of flexural reinforcing bars terminating in columns

Application of Titanium Alloy Bars for Strengthening Reinforced Concrete Bridge Girders in Flexure

Freeze-thaw durability of reinforced concrete deck girders strengthened for shear with surface-bonded carbon fiber-reinforced polymer

Environmental durability of reinforced concrete deck girders strengthened with surface-bonded carbon fiber-reinforced polymer

Scale effects on reinforced concrete beams strengthened for shear with discrete externally bonded carbon fiber-reinforced polymer U-wraps

Influence of diagonal cracks on negative moment flexural anchorage performance in reinforced concrete bridge girders

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Shear repair methods for conventionally reinforced concrete girders and deep beams

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search