Index Catalog // ScholarsArchive@OSU

Creator:: Srikanth, Tarimala S.
Abstract:: In a majority of light-frame wood buildings, studs and joists are the basic structural components in walls and floors. The walls act as bending and compressive panels and transmit lateral wind and gravity loads to the foundation. Joists are used in floor systems, and together with the sheathing member act...
Resource Type:: Dissertation

Creator:: Kasal, Bohumil
Abstract:: The light-frame wood structure is an assemblage of several components such as walls, floors and roof connected by intercomponent connections such as nails or metal plates. The behavior of the full-structure is determined by the behavior of the individual components and connections. Whereas individual substructures were investigated both experimentally and...
Resource Type:: Dissertation

Creator:: Tjahyadi, Alfred
Abstract:: Friction dampers have been used successfully to dissipate seismic energy in steel and concrete structures. The application is new to timber structures. The objectives of this research were to design a slotted bolted connection (SBC) and evaluate its potential as a passive energy damper in timber brace. The research was...
Resource Type:: Masters Thesis
Full Text:: implemented in a timber brace although the effect on building performance remains to be studied

Creator:: Groom, Kevin
Abstract:: Nailed connections have nonlinear load-displacement relations. Modeling these connections in an assembled structure would require a great amount of computational time because of the large number of degrees of freedom. Replacing these connections with energetically-equivalent nonlinear springs reduces the number of degrees of freedom, and leads to computational efficiency in...
Resource Type:: Masters Thesis

Creator:: Bultena, Sarah M.
Abstract:: Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
Resource Type:: Masters Thesis
Full Text:: (OSB) or plywood in light-framed building construction (Carradine et al. 2004). Research on the

Creator:: Kent, Scott M.
Abstract:: Service life prediction models for light-framed wood structures require an extensive quantity of empirical data on deterioration pathologies for the numerous structural components, as well as mechanistic approaches to determine their capacity at various levels of deterioration. The data and models presented in this study satisfy a portion of the...
Resource Type:: Dissertation

Creator:: Carroll, Cameron T.
Abstract:: Light-frame construction practices and materials have changed greatly over the past 100 years. Contemporary research has focused on modern construction; thus, we know a great deal about the behavior of modern lightframe buildings under lateral forces. However, there are many light-frame buildings that were built prior to the introduction of...
Resource Type:: Masters Thesis
Full Text:: light-frame buildings that were built prior to the introduction of modern building codes and

Creator:: Anderson, Erin N.
Abstract:: Key parts of the lateral force resisting system in wood-frame buildings are the shearwafls and the connections. The connections in wooden buildings are the primary source of ductility and energy dissipation; these are essential properties when buildings are exposed to lateral forces, such as wind and earthquakes. Shearwall design is...
Resource Type:: Masters Thesis
Full Text:: buildings are the shearwafls and the connections. The connections in wooden buildings are the primary

ScholarsArchive@OSU