Movement pattern detection can be applied in a variety of applications such as assisting independent living of seniors at home, behaviour understanding in surveillance systems, sports analytics, and robotics. This project develops a scheme that fuses information from different sensors to detect movement patterns. This report contains three main parts:...
Wearable sensors with an inertial measurement unit (IMU) are popular for indoor positioning and activity pattern detection. The IMUs can be connected to a wireless transmission module, allowing users to monitor and process motion-related parameters remotely. Because of the complexity and uncertainty of signals in indoor environments, a radio frequency...
This thesis deals with target localization using multiple-input multiple-output (MIMO) radars. In the field of communications, navigation, radar, and sensing networks, one of the common and most sophisticated problems is target localization. We develop a target localization scheme in distributed MIMO radar systems using bistatic range measurements. The localization approach...
Due to the continued evolution of 5G standards, the need for higher rates of data, lower latency network access, and implementations that are more energy efficient have become clear. To enable wireless communications at rates over tens of Gbps, the wide bandwidth of mmWave spectrum can be exploited. Beamforming (or...
Direct sequence spread spectrum (DSSS) was initially used for anti-jamming in military applications and was later developed in other commercial applications. Walsh codes, which are a set of mutually orthogonal codes, are one type of the spreading codes used in DSSS systems. For any spreading codes of length N, these...
Triangulateration uses geometric distance to estimate the location of user by employing techniques like received signal strength (RSS), time-of-arrival (TOA), time-difference-of-arrival (TDOA) and image processing.
Radio frequency (RF) signal positioning using TOA or TDOA techniques generally requires timing synchronization of the anchors and/or the anchors and targets. If the desired...
Wireless power transfer (WPT) is a way to transfer power from one device to another without any wire or cable connections. Although the technology has been around for more than 100 years, it is gaining popularity in recent years due to the ever-increasing demand for faster and more frequent charging...
Hybrid automatic repeat request (HARQ) schemes combine packet retransmission with forward error correction to ensure a reliable communications. In multiple-input multiple output (MIMO) systems, interference cancellation (IC) detection is widely used where the detection and cancellation steps of the simultaneously transmitted data streams occur. In principle, the signal stream estimated...
Threshold-based time of arrival (TOA) estimation is a technique for high-precision indoor localization. Existing threshold selection methods, such as xed thresh- old and normalized threshold methods, do not consider the signal-to-noise radio (SNR) value at the receiver. This is not desired for high-precision positioning. A proper threshold value depends on...
Optical wireless communication (OWC) is an alternative to radio frequency (RF)communication with a signi cantly larger and unregulated spectrum. In OWC systems, optical orthogonal frequency division multiplexing (O-OFDM) with intensity modulation and direct detection (IM/DD) is commonly used. There are two common signal structures in most OWC systems based on...
Advances in low-power digital integration and microelectro-mechanical systems (MEMS) have paved the way for micro-sensors. These sensors are equipped with data processing capabilities along with sensory circuits. Sensor data are processed on these individual sensors and transmitted to the target (sink). Lowcost integration and small sizes of these sensors have...
Impulse-radio ultra-wide-band (IR-UWB) signaling is a promising technique
for high-speed, short-range relay communications networks. Depending on how
the relay node retransmits the signal, there are two main relay schemes: conventional
one-directional (one-way) relay model, and bi-directional (two-way) relay
model. In bi-directional relay communications, wireless network coding (WNC),
also called physical-layer...
Indoor positioning systems can be used for many applications such as indoor navigation,emergence response, asset monitoring, and shopper assistance. Due to the weak received signal and multipath reflection, the global positioning system (GPS) generally does not work in indoor environments. There are a variety of radio frequency (RF) signals and...
In modern digital communication systems, error correction codes (ECC) are widely used and play an important role. The main effect of ECCs is to reduce the transmission error caused by channel noise, thereby protecting data and increasing the quality of information transmission. In addition, high spectral efficiency is desired in...
Network coding, as the next generation of data routing protocols, enables each intermediate node in a network to process and encode its received data before forwarding it to the next nodes. Hence, the core idea in network coding is to allow a network to encode the data that is being...
Inter-symbol interference is one of the major factors that make the realization of high-data-rate digital communications system complex. Current designs face two main challenges: how to efficiently utilize the available bandwidth and how to reduce the hardware complexity of the transmitter and receiver. Traditional solutions use a single-band architecture. When...
Pulsed ultra-wideband (UWB) radio uses extremely short pulses to transmit
information. Such pulses provide very fine timing information, which has led to
technological advances in high-precision localization. This thesis focuses on
techniques and experiments of Time-Difference-of-Arrival (TDOA) localization of
a large number of simultaneous sources. First, common localization techniques
such...
Multiple-input multiple-output (MIMO) antennas can be exploited to provide high data rate using a limited bandwidth through multiplexing gain. MIMO combined with orthogonal frequency division multiplexing (OFDM) could potentially provide high data rate and high spectral efficiency in frequency-selective fading channels. MIMO-OFDM technology has been widely employed in modern communication...
Indoor localization systems have a variety of applications such as tracking of assets, indoor robot navigation, and monitoring of people (e.g. patients) in hospitals or at home. Global positioning system (GPS) offers location accuracy of several meters and is mainly used for outdoor location-based applications as its accuracy degrades significantly...
The quality of a digital image pipeline relies greatly on its color reproduction which should at a minimum handle the color constancy, and the final judgment of the excellence of the pipeline is made through subjective observations by humans.
This dissertation addresses a few topics surrounding the color processing of...
Relay-assisted cooperative communications are promising solutions for error-performance improvement and cell coverage extension. In this thesis, we propose several efficient cooperative relay communication schemes. First, an efficient space-time coded cooperative relay communications scheme that employs linear precoding and transmission-pattern selection is proposed. This is built upon an existing block linear...
Powerline communication (PLC), is becoming a more commonplace method for data transmission, however it is still a very new medium for data transmission, and international standards for powerline communication are still in the process of being developed and established. PLC can provide a means of simplifying the device connectivity to...
Pulsed ultra-wideband (UWB) radio uses extremely short pulses to transmit information. Such pulses provide very fine timing information, which has led to technological advances in high-precision localization. This thesis investigates UWB localization strategies with a focus on receiver synchronization algorithms for time-difference-of-arrival localization to achieve centimeter accuracies in a 3-dimensional...
One of the key challenges in downlink multiuser multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems is the mitigation of the multi-access interference when different users share the same subcarriers. In this work, the block diagonalization (BD) algorithm for inter-user interference pre-cancelation is extended to MIMO-OFDM systems. However, in...
Recent developments in computing technology have generated a demand for more streamlined and effective test systems. By replacing traditional in-chassis wired interconnects with a broadcast wireless system, fault detection and error susceptibility will drastically improve, input/output capabilities will expand, and routing complexity will decrease. Ultra-wideband impulse radio's (UWB-IR) characteristic multipath-immunity...
Error correction codes (ECCs) have been widely used in communication systems and storage devices. Nowadays, the rapid development of integrated circuit technologies makes feasible the implementation of powerful ECCs such as turbo code and low-density parity-check (LDPC) code. However, these high-performance codes require complex decoding algorithms, resulting in large hardware...