Due to the continued evolution of 5G standards, the need for higher rates of data, lower latency network access, and implementations that are more energy efficient have become clear. To enable wireless communications at rates over tens of Gbps, the wide bandwidth of mmWave spectrum can be exploited. Beamforming (or...
Triangulateration uses geometric distance to estimate the location of user by employing techniques like received signal strength (RSS), time-of-arrival (TOA), time-difference-of-arrival (TDOA) and image processing.
Radio frequency (RF) signal positioning using TOA or TDOA techniques generally requires timing synchronization of the anchors and/or the anchors and targets. If the desired...
Wireless power transfer (WPT) is a way to transfer power from one device to another without any wire or cable connections. Although the technology has been around for more than 100 years, it is gaining popularity in recent years due to the ever-increasing demand for faster and more frequent charging...
Hybrid automatic repeat request (HARQ) schemes combine packet retransmission with forward error correction to ensure a reliable communications. In multiple-input multiple output (MIMO) systems, interference cancellation (IC) detection is widely used where the detection and cancellation steps of the simultaneously transmitted data streams occur. In principle, the signal stream estimated...
Advances in low-power digital integration and microelectro-mechanical systems (MEMS) have paved the way for micro-sensors. These sensors are equipped with data processing capabilities along with sensory circuits. Sensor data are processed on these individual sensors and transmitted to the target (sink). Lowcost integration and small sizes of these sensors have...
Impulse-radio ultra-wide-band (IR-UWB) signaling is a promising technique
for high-speed, short-range relay communications networks. Depending on how
the relay node retransmits the signal, there are two main relay schemes: conventional
one-directional (one-way) relay model, and bi-directional (two-way) relay
model. In bi-directional relay communications, wireless network coding (WNC),
also called physical-layer...
Indoor positioning systems can be used for many applications such as indoor navigation,emergence response, asset monitoring, and shopper assistance. Due to the weak received signal and multipath reflection, the global positioning system (GPS) generally does not work in indoor environments. There are a variety of radio frequency (RF) signals and...
Network coding, as the next generation of data routing protocols, enables each intermediate node in a network to process and encode its received data before forwarding it to the next nodes. Hence, the core idea in network coding is to allow a network to encode the data that is being...
Multiple-input multiple-output (MIMO) antennas can be exploited to provide high data rate using a limited bandwidth through multiplexing gain. MIMO combined with orthogonal frequency division multiplexing (OFDM) could potentially provide high data rate and high spectral efficiency in frequency-selective fading channels. MIMO-OFDM technology has been widely employed in modern communication...
Indoor localization systems have a variety of applications such as tracking of assets, indoor robot navigation, and monitoring of people (e.g. patients) in hospitals or at home. Global positioning system (GPS) offers location accuracy of several meters and is mainly used for outdoor location-based applications as its accuracy degrades significantly...
The quality of a digital image pipeline relies greatly on its color reproduction which should at a minimum handle the color constancy, and the final judgment of the excellence of the pipeline is made through subjective observations by humans.
This dissertation addresses a few topics surrounding the color processing of...
Relay-assisted cooperative communications are promising solutions for error-performance improvement and cell coverage extension. In this thesis, we propose several efficient cooperative relay communication schemes. First, an efficient space-time coded cooperative relay communications scheme that employs linear precoding and transmission-pattern selection is proposed. This is built upon an existing block linear...
Error correction codes (ECCs) have been widely used in communication systems and storage devices. Nowadays, the rapid development of integrated circuit technologies makes feasible the implementation of powerful ECCs such as turbo code and low-density parity-check (LDPC) code. However, these high-performance codes require complex decoding algorithms, resulting in large hardware...