Index Catalog // ScholarsArchive@OSU

Creator:: Kelley, John E.
Abstract:: A method for measuring the spark-shower radiance of metals when abraded on an abrasive grinding wheel was developed for evaluating their sparking tendency. One hundred metals were tested and rated relative to commercially pure iron. The radiance was measured in units of energy per solid angle per area of the...
Resource Type:: Masters Thesis
Full Text:: Metallurgical Engineering presented on (Date) (Major) Title: STUDIES OF THE RADIANCE OF METAL GRINDING

Creator:: Davis, Bernard Eric, 1937-
Resource Type:: Dissertation
Full Text:: ) METALLURGICAL ENGINEERING in (MATERIALS SCIENCE) (Major) presented on p ic(10 (Date) Title: BULK SELF

Creator:: Goodrich, David George
Abstract:: High purity single crystals of zirconium were produced and mechanically strained in the temperature range from 4.2°K to 293°K. The crystals were produced by thermal treatment with a specially constructed electron beam zone refiner which provided the abrupt temperature gradient necessary for crystal growth. Specimens were electrolytically machined to have...
Resource Type:: Dissertation
Full Text:: Philosophy (Name) (Degree) in Metallurgical Engineering presented on Title: Oci. /9 (Major) (Date) LOW

Creator:: Findley, Lee Gordon
Abstract:: The erratic behavior of the room temperature yield strength of high purity commercial tantalum sheet was studied. Critical factors in the production process were postulated and then investigated to determine their effects on strength properties. Chemical composition was found to be the most important factor contributing to the strength; thermomechanical...
Resource Type:: Masters Thesis
Full Text:: Metallurgical Engineering in charge of major Redacted for Privacy Head of 4 Enginee partment of Mec anical

Creator:: Sokaski, Michael
Abstract:: First order prism slip in yttrium single crystals containing a total interstitial impurity content of about 200 wt ppm is almost entirely stage II deformation with a work hardening rate θ/μ of 2·10⁻ ³ . The athermal temperature is about 300°K. Below this temperature an interstitial mechanism is rate controlling...
Resource Type:: Dissertation
Full Text:: (Name of student) (Degree) in Mechanical and Metallurgical Engineering presented on (Major department

ScholarsArchive@OSU